1. Introduction
This manual provides essential information for the safe operation, maintenance, and setup of your HWWH P3 Electric Scooter. Please read this manual thoroughly before first use to ensure proper function and longevity of your device.
The HWWH P3 Electric Scooter is designed for adults, featuring a powerful dual motor system and a long-range battery, suitable for various terrains. Always prioritize safety by wearing appropriate protective gear and adhering to local regulations.
Image 1.1: Front-side view of the HWWH P3 Electric Scooter.
Image 1.2: The HWWH P3 Electric Scooter parked outdoors on a paved road.
2. Components Overview
Familiarize yourself with the main components of your HWWH P3 Electric Scooter:
- Handlebars: Equipped with controls for acceleration, braking, lights, and display.
- Display: 9-inch multi-function LCD central smart display.
- Motors: Dual 4000W high-torque brushless Hall motors.
- Battery: 72V/40Ah lithium battery.
- Tires: 13-inch full-time tubeless tires, suitable for various terrains.
- Suspension: Front and rear dual hydraulic suspensions.
- Brakes: EBS electronic braking system and hydraulic disc brakes.
- Lighting: Combination headlights, LED ambient lights, turn signals, rear brake light.
- Charging Ports: Two charging ports for efficient charging.
Image 2.1: Handlebar controls including the LCD display, accelerator, and switches.
Image 2.2: Illustration of the scooter's hydraulic dual suspensions and rear damping spring shock absorber.
Image 2.3: The 13-inch vacuum all-terrain tire, designed for urban roads, sand, country roads, and rough terrain.
3. Setup
- Unboxing and Inspection: Carefully remove all components from the packaging. Inspect the scooter for any signs of damage during transit. Ensure all included components (charger, installation tool, seat) are present.
- Handlebar Assembly: Attach the handlebars to the main stem using the provided installation tool. Ensure all bolts are securely tightened.
- Seat Installation (Optional): If using the seat, follow the specific instructions for its attachment to the scooter deck.
- Initial Charging: Before first use, fully charge the battery. Connect the charger(s) to the charging port(s) on the scooter and then to a power outlet. The charging time is approximately 8-10 hours for double charging.
Image 3.1: Location of the charging ports and product information label.
- Tire Pressure Check: Verify that the tires are inflated to the recommended pressure. Refer to the tire sidewall for specific pressure ratings.
- Pre-Ride Safety Check: Before each ride, ensure brakes are functional, lights are working, and all quick-release mechanisms are secure.
4. Operating Instructions
4.1 Powering On/Off
- To power on the scooter, insert the key into the ignition and turn it to the ON position. Press the power button on the display.
- To power off, turn the key to the OFF position and press the power button on the display.
4.2 Display and Controls
The 9-inch multi-function LCD central smart display provides real-time information such as speed, battery level, and riding mode. Use the buttons on the handlebars to navigate through settings and modes.
- Accelerator Paddles: Control speed by pressing the accelerator.
- Brake Levers: Activate the hydraulic disc brakes and EBS electronic braking system.
- Light Switch: Turn on/off the headlights and ambient lights.
- Horn Switch: Activate the horn for signaling.
- Speed-limiting Switch: Adjust the maximum speed setting.
- Single/Dual Drive Switching Switch: Toggle between single and dual motor operation.
4.3 Lighting System
The scooter is equipped with a comprehensive lighting system for visibility and safety, especially during night riding.
- Combination Headlights: Provide illumination for the path ahead.
- Cool LED Ambient Lights: Enhance visibility and aesthetics.
- Turn Signals: Indicate your turning intentions.
- Rear Brake Light: Illuminates when brakes are applied.
Image 4.1: The scooter's lighting system, including headlights, ambient lights, turn signals, and brake light, for safe night driving.
4.4 Folding and Unfolding
The scooter features a foldable design for convenient storage and transport.
Image 4.2: The HWWH P3 Electric Scooter in its folded configuration.
Image 4.3: Diagram showing the expanded and folded dimensions of the scooter.
4.5 Riding Safety
- Always wear a helmet and other protective gear (gloves, knee pads, elbow pads).
- Adhere to local traffic laws and regulations for electric scooters.
- Maintain a safe speed and distance from other vehicles and pedestrians.
- Avoid riding in adverse weather conditions or on slippery surfaces.
- Be aware of your surroundings and potential hazards.
5. Maintenance
5.1 Battery Care
- Always use the original charger provided with the scooter.
- Avoid completely draining the battery before recharging.
- Store the scooter in a cool, dry place when not in use, and ensure the battery is partially charged (e.g., 50-70%) if storing for extended periods.
- Do not expose the battery to extreme temperatures.
5.2 Tire Maintenance
- Regularly check tire pressure and inflate to the recommended PSI.
- Inspect tires for wear, cuts, or punctures. Replace worn tires promptly.
5.3 Brake System
- Periodically check the brake levers and cables for proper tension and function.
- Ensure brake pads are not excessively worn. Consult a professional for brake adjustments or replacements if needed.
5.4 General Cleaning and Storage
- Clean the scooter with a damp cloth. Avoid using high-pressure water jets directly on electrical components.
- Store the scooter in a dry, secure location away from direct sunlight and extreme temperatures.
6. Troubleshooting
If you encounter issues with your HWWH P3 Electric Scooter, refer to the following common troubleshooting tips:
- Scooter not turning on: Ensure the key is in the ON position, the battery is charged, and all connections are secure.
- Reduced range: Check tire pressure, ensure the battery is fully charged, and consider riding conditions (e.g., uphill riding, heavy load, low temperature can reduce range).
- Braking issues: Inspect brake levers, cables, and pads. If issues persist, seek professional assistance.
- Unusual noises: Stop riding immediately and inspect the scooter for loose parts or damage.
For issues not covered here, please contact customer support.
7. Specifications
| Model | P3 |
| Material | Reinforced aluminum alloy frame |
| Controller | 60V45A dual sine wave controller |
| Battery | 72V 40Ah, 21700 lithium battery |
| Waterproof Grade | IP54 |
| Maximum Climbing Angle | 45° |
| Maximum Range | 75 miles (120 kilometers) |
| Tires | 13-inch full-time tubeless tires |
| Screen | High-end 9-inch display |
| Charger | 2A+5A charger (two charging ports) |
| Charging Time | 8-10 hours for double charging |
| Vehicle Weight | 58kg (128 lbs) |
| Maximum Load | 200kg (440 lbs) |
| Expanded Size | 130×58×132cm (51"L x 23"W x 52"H) |
| Folded Size | 135×28×50cm |
| Manufacturer | FUFONG |
| UPC | 739804333426 |
8. Warranty and Support
The HWWH P3 Electric Scooter comes with the following warranty coverage:
- Battery: Guaranteed for six months.
- Motor and Controller: Guaranteed for one year.
- Consumables: Tires and brake pads are not covered by the warranty.
- Product Quality Problems: Free replacement parts within 180 days for product quality issues.
For any warranty claims, technical assistance, or product inquiries, please contact our professional after-sales team. Refer to your purchase documentation for specific contact details.