HROOME ATFLP003B Mini Wooden Floor Lamp Instruction Manual

1. Product Overview

The HROOME ATFLP003B Mini Wooden Floor Lamp is a unique and adjustable lighting solution designed for various indoor spaces such as living rooms, bedrooms, offices, and kids' rooms. Crafted from high-quality plywood, this floor lamp features a creative swing-arm design that allows for multiple poses and configurations, making it both a functional light source and a decorative element. It includes an energy-efficient LED filament bulb providing soft 2700K warm white lighting.

2. Assembly Instructions

Your HROOME ATFLP003B Mini Wooden Floor Lamp requires assembly. Please follow these steps carefully to ensure proper setup and functionality. Assembly typically takes approximately 25 minutes.

2.1 Unpacking and Component Identification

Carefully unpack all components from the Kraft Paper Packaging. Verify that all parts listed in the manual are present. The package includes the lamp body pieces, a lampshade, an LED filament bulb (8 watt, 110V-120V AC, UL listed, 2400 lumens, 2700K warm white, non-dimmable), a cloth braided cord with a button switch, Allen wrenches, and white gloves for handling.

2.2 Step-by-Step Assembly

1. Prepare Screws and Plastic Rings: Before starting, organize the screws and plastic rings. Ensure you use the correct screws for each joint as indicated in the detailed instruction manual provided in the box.
2. Assemble the Base and Legs: Begin by attaching the foot pieces to the main base using the provided screws and Allen wrenches. Ensure plastic rings are placed between wooden pieces at each joint to allow for smooth movement and prevent damage.
3. Connect Body Segments: Continue assembling the leg and body segments. For the adjustable joints, tighten the screws sufficiently to hold the position, but not so tightly that movement is restricted.
4. Attach Arms: Install the arm segments to the upper body. These joints are also adjustable.
5. Assemble the Lampshade: The lampshade comes in a rolled-up sheet and metal rings. Carefully round up the lampshade sheet and attach it to the metal rings using the adhesive strips.
6. Install the Light Socket and Lampshade: Separate the cord ring from the light socket. Thread the power cord through the top wooden piece. Secure the lampshade to the top wooden piece by reattaching the cord ring to the light socket, locking the lampshade in place.
7. Insert the Bulb: Screw the provided LED filament bulb into the light socket.
8. Route the Power Cord: Carefully route the power cord along the lamp's body, securing it as needed to maintain the lamp's aesthetic and prevent tangling.

2.3 Assembly Video Guide

For a visual guide on the assembly process, please refer to the official product video below:

3. Operating Instructions

3.1 Powering On/Off

The HROOME ATFLP003B Floor Lamp is equipped with a convenient button switch located on the power cord. To turn the lamp on or off, simply press the button.

3.2 Adjusting the Lamp's Pose

The unique design of this floor lamp allows for various adjustable poses. The arms, legs, and torso segments are connected by screws that can be loosened or tightened using the provided Allen wrenches. To adjust a segment:

1. Identify the joint you wish to adjust.
2. Slightly loosen the screw at that joint using the Allen wrench.
3. Carefully move the segment to your desired position.
4. Tighten the screw firmly to secure the segment in place. Ensure it is tight enough to prevent unwanted movement but do not overtighten to avoid damaging the wood.

4. Maintenance

4.1 Cleaning

To clean the wooden parts of the lamp, use a soft, dry cloth. For stubborn marks, a slightly damp cloth can be used, followed immediately by a dry cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the wood finish.

The lampshade can be gently dusted with a soft brush or a lint roller. Do not wash the lampshade with water.

4.2 Bulb Replacement

To replace the LED bulb, ensure the lamp is unplugged from the power outlet. Carefully unscrew the old bulb and screw in a new E26 base LED bulb (maximum 8 watts recommended). The included bulb is non-dimmable; if you wish to use a dimmable bulb, ensure your electrical system and switch support dimming.

4.3 Joint Care

Periodically check the tightness of all screws at the joints. If any joint feels loose, use the provided Allen wrench to tighten it. Ensure the plastic rings remain in place between the wooden pieces to facilitate smooth movement and prevent wear.

5. Troubleshooting

• Lamp does not turn on:
  • Ensure the power cord is securely plugged into a working electrical outlet.
  • Check if the button switch on the cord is in the 'on' position.
  • Verify that the LED bulb is screwed in correctly and is not faulty. Try replacing the bulb with a known working one.
• Lamp joints are loose or difficult to adjust:
  • If joints are loose, use the provided Allen wrench to tighten the screws.
  • If joints are too stiff, slightly loosen the screws. Ensure the plastic rings are correctly positioned between the wooden parts to allow for smooth articulation.
• Lampshade is uneven or detached:
  • Ensure the lampshade material is properly adhered to the metal rings.
  • Check that the cord ring is securely tightened around the light socket, holding the lampshade in place.

6. Product Specifications

7. Warranty and Support

HROOME offers a 100% risk-free commitment. If your lamp has any defect or stops working, the HROOME Service Team will respond to you within 24 hours during working days to troubleshoot and/or provide replacement parts or a new product.

For support, please contact the HROOME Service Team directly through the seller contact information provided at the point of purchase or visit the official HROOME store on Amazon: HROOME Store.