Introduction
Thank you for choosing the SOHLER 16 Inch Pedestal Fan. This manual provides important information regarding the safe operation, assembly, maintenance, and troubleshooting of your new fan. Please read this manual thoroughly before use and retain it for future reference.
Safety is our number one priority. This plastic fan is ETL listed, ensuring it meets recognized safety standards.
Product Overview
Image: Front view of the SOHLER 16 Inch Pedestal Fan, showing the fan head with protective grille, adjustable stand, and stable base.
The SOHLER 16 Inch Pedestal Fan is designed to provide efficient and customizable cooling for various indoor spaces. Its features include:
- 3 Speed Settings: Mechanical rotary dial for low, medium, and high airflow.
- 90° Wide-Angle Oscillation: Distributes air circulation across a wide area.
- Adjustable Height: The fan's stand can be adjusted to direct airflow at different levels.
- Tilt-Back Head: Allows for precise aiming of airflow.
- Durable & Safe Design: Sturdy base for stability and a fused safety plug to prevent damage from over-voltage and power surges.
- Easy Assembly & Cleaning: Designed for tool-free assembly and removable grilles for simple cleaning.
Parts List
Before assembly, ensure all parts are present:
- Fan Head Assembly (includes motor, blades, front and rear grilles)
- Adjustable Stand Pole
- Base
- Power Cord with Fused Safety Plug
Setup and Assembly
The SOHLER Pedestal Fan is designed for easy, tool-free assembly. Follow these steps:
- Attach the Base: Securely attach the adjustable stand pole to the fan's base. Ensure it is stable and upright.
- Mount the Fan Head: Carefully attach the fan head assembly to the top of the adjustable stand pole. Ensure it clicks into place or is securely fastened according to the specific design.
- Adjust Height: Loosen the height adjustment knob on the stand, extend or retract the pole to your desired height, and then tighten the knob firmly to secure.
- Positioning: Place the fan on a flat, stable surface, away from curtains or other objects that could obstruct airflow or be drawn into the fan blades.
Operating Instructions
To operate your SOHLER Pedestal Fan:
- Power Connection: Plug the fan's power cord into a standard 120V AC electrical outlet.
- Adjust Fan Speed: Locate the mechanical rotary dial, typically on the fan's motor housing. Turn the dial to select your desired speed setting:
- L (Low): For a gentle breeze.
- M (Medium): For moderate airflow.
- H (High): For maximum cooling.
- Activate Oscillation: To enable the 90° oscillation feature, press down the oscillation knob located on top of the motor housing. To stop oscillation, pull the knob up.
- Adjust Tilt: Manually tilt the fan head up or down to direct the airflow precisely where needed.
- Turn Off: Turn the rotary dial to the "OFF" position to switch off the fan. For complete power disconnection, unplug the fan from the outlet.
Maintenance
Regular cleaning and maintenance will ensure optimal performance and longevity of your fan.
- Cleaning the Grilles: The fan grilles can be removed for easy cleaning. Ensure the fan is unplugged before attempting to remove the grilles. Use a soft, damp cloth to wipe down the grilles and blades. Do not use abrasive cleaners or allow water to drip into the motor housing.
- General Cleaning: Wipe the exterior surfaces of the fan with a soft, dry cloth.
- Storage: When not in use for extended periods, store the fan in a cool, dry place, preferably in its original packaging to protect it from dust.
Troubleshooting
If you encounter issues with your SOHLER Pedestal Fan, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fan does not turn on. | Not plugged in; power outlet not working; fused safety plug tripped. | Ensure fan is securely plugged into a working outlet. Check household circuit breaker. Inspect the fused safety plug for a tripped fuse (refer to plug instructions for replacement if needed). |
| Weak airflow. | Fan speed set too low; grilles or blades are dirty. | Increase fan speed using the rotary dial. Unplug the fan and clean the grilles and blades as per maintenance instructions. |
| Fan is noisy. | Loose parts; fan not on a stable surface; debris in blades. | Ensure all assembly parts are securely tightened. Place the fan on a flat, stable surface. Unplug and check for any debris obstructing the blades. |
| Oscillation not working. | Oscillation knob not engaged. | Press down the oscillation knob firmly to engage the oscillation function. |
If the problem persists after trying these solutions, please contact Sohler customer support.
Specifications
- Model: SFS16W
- Fan Design: Pedestal Floor Fan
- Size: 16 Inch
- Product Dimensions: 27"D x 27"W x 47"H (Adjustable Height)
- Weight: 5.7 Pounds
- Power Source: Corded Electric
- Voltage: 120V
- Wattage: 32 Watts
- Number of Speed Levels: 3
- Oscillation: 90° Wide-Angle
- Control Method: Rotary Dial
- Blade Material: Plastic
- Safety Certification: ETL Listed
- Color: White
- UPC: 810173034517
Warranty and Support
This SOHLER Pedestal Fan comes with a 1-year Manufacturer's Warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use.
For warranty claims, technical support, or any questions regarding your product, please contact Sohler customer service. Please have your model number (SFS16W) and proof of purchase ready when contacting support.
SOHLER is a trusted brand in home comfort for over 25 years.