1. Introduction
Thank you for choosing the Kappesberg Merdian Nightstand. This nightstand is designed to provide functional storage and a stylish accent to your bedroom or living space. It features two drawers and an open storage niche, ideal for books, electronic devices, and other personal items. Constructed from engineered wood with a resistant melamine finish and supported by modern metal legs, this piece combines durability with a contemporary design.
2. Safety Information
- Weight Limit: Do not exceed the maximum weight recommendation of 70 pounds (31.75 kg) on the top surface. Distribute weight evenly.
- Assembly: Ensure all components are correctly assembled and fasteners are tightened according to the assembly guide to prevent instability.
- Anti-Tip Device: If an anti-tip device is included, it is strongly recommended to install it to prevent serious injury from tipping furniture.
- Children: Keep small parts and packaging materials away from children during assembly. Do not allow children to climb on or play with the nightstand.
- Placement: Place the nightstand on a level, stable surface.
3. Package Contents
Before beginning assembly, verify that all components listed below are present and undamaged. If any parts are missing or damaged, please contact customer support.
- Nightstand panels (top, bottom, sides, back, drawer fronts, drawer sides/backs)
- Metal legs
- Drawer slides and hardware
- Aluminum handles
- Fasteners (screws, dowels, cam locks, etc.)
- Assembly Guide
- Installation Tool (e.g., Allen wrench)
4. Setup and Assembly
Assembly of the Kappesberg Merdian Nightstand requires following the detailed instructions provided in the included Assembly Guide. It is recommended to assemble the unit on a soft, clean surface to prevent scratches.
General Assembly Steps:
- Prepare Components: Unpack all parts and lay them out, identifying each piece according to the Assembly Guide.
- Assemble Frame: Connect the main panels (sides, top, bottom) using the provided fasteners.
- Install Drawer Slides: Attach the drawer slides to the interior side panels of the nightstand frame.
- Assemble Drawers: Construct the two drawers, ensuring the drawer bottoms are properly seated and the drawer slides are attached.
- Attach Handles: Secure the aluminum handles to the drawer fronts.
- Insert Drawers: Carefully slide the assembled drawers into the installed drawer slides on the nightstand frame.
- Attach Back Panel: Secure the back panel to the rear of the nightstand frame.
- Install Metal Legs: Attach the metal legs to the bottom of the nightstand frame.
- Final Check: Ensure all fasteners are tight and the nightstand is stable.
5. Operating Instructions
Using the Drawers:
The Merdian Nightstand features two smooth-gliding drawers. To open, gently pull the aluminum handle. To close, push the drawer firmly until it is fully seated. Avoid overloading drawers to ensure smooth operation and prevent damage to the slides. Distribute items evenly within the drawers.
Using the Storage Niche:
The open storage niche above the drawers is ideal for items you need to access frequently, such as books, magazines, or electronic devices. It is also suitable for overnight cellphone charging.
6. Maintenance and Care
- Cleaning: Wipe the nightstand surfaces with a dry, soft cloth. Avoid using abrasive cleaners, harsh chemicals, or excessive moisture, as these can damage the melamine finish.
- Spills: Immediately wipe up any spills to prevent staining or damage to the engineered wood.
- Sunlight: Avoid prolonged exposure to direct sunlight, which can cause fading or discoloration over time.
- Heat: Do not place hot items directly on the surface. Use coasters or protective pads.
- Fasteners: Periodically check and tighten all fasteners to ensure the nightstand remains stable and secure.
7. Troubleshooting
- Wobbly Nightstand: Ensure the nightstand is on a level surface. Check all assembly fasteners and tighten them if loose.
- Drawers Not Closing Smoothly: Verify that the drawer slides are correctly installed and aligned. Check for any obstructions within the drawer or on the slides. Ensure drawers are not overloaded.
- Missing or Damaged Parts: If you discover any missing or damaged components during unpacking or assembly, refer to the contact information in the Warranty and Support section for assistance. Do not attempt to assemble with damaged parts.
8. Specifications
| Brand | Kappesberg |
| Model Name | Meridian 2 Drawer Nightstand with Niche |
| Model Number | EU004 |
| Product Dimensions (D x W x H) | 17.7"D x 21.25"W x 24.4"H (45 cm D x 54 cm W x 62 cm H) |
| Item Weight | 42 Pounds (19.05 kg) |
| Maximum Weight Recommendation | 70 Pounds (31.75 kg) |
| Frame Material | Metal |
| Top Material | Engineered Wood, Aluminum |
| Material Type | Engineered Wood |
| Color | White |
| Included Components | Assembly Guide, Installation Tool |
| Product Care Instructions | Wipe with Dry Cloth |
9. Warranty and Support
The Kappesberg Merdian Nightstand is covered by a 90-day limited manufacturer warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from improper assembly, misuse, accidents, or normal wear and tear.
For warranty claims, missing parts, or technical support, please contact Kappesberg customer service. Please have your model number (EU004) and proof of purchase available when contacting support.
