Mia&Coco UB42B-S-C
Mia&Coco Electric Heated Blanket Single User Manual
Model: UB42B-S-C
1. Important Safety Information
Please read all instructions carefully before using your Mia&Coco Electric Heated Blanket. Failure to follow these safety guidelines may result in electric shock, fire, or injury.
- Keep the electric heated blanket away from water. Do not immerse the controller or blanket in water or other liquids.
- Ensure the blanket is not in contact with flammable materials during operation.
- Do not fold or crease the blanket while in use or during storage. This can cause overheating in specific areas.
- Unplug the blanket from the power outlet when not in use or when leaving the house.
- People with reduced mobility, sensitivity to heat, or inability to react to heat should use the blanket with caution and under supervision.
- Supervise children and pets while the blanket is in use. This appliance is not intended for use by young children or infirm persons without supervision.
- Always follow the provided usage instructions and care guidelines to ensure safe and prolonged product life.
- Do not use if the blanket or power cord is damaged. Contact customer support for assistance.
2. Product Overview
The Mia&Coco Electric Heated Blanket Single (150x80cm) is designed to provide warmth and comfort. It features a soft, skin-friendly fleece material and advanced heating technology.

Image: The Mia&Coco Electric Heated Blanket, showing the blanket folded and its retail packaging with key features highlighted.
Key Features:
- Thickened Fleece Material: Made from premium polyester with an extra layer of soft, skin-friendly fleece for enhanced comfort.
- Fast Heating: Dual helix heating wires warm up in approximately 3 minutes.
- 3 Heat Settings: Adjustable heat levels (High, Medium, Low) and a preheat function for quick warmth.
- LED Control & Timer: Easy-to-use LED controller with timer options for 2, 4, or 12 hours.
- Automatic Shut-off: Built-in safety feature for energy saving and peace of mind.
- Overheat Protection: Multiple safety protections including a built-in temperature sensor and flame-retardant materials.
- Elasticated Straps: User-friendly elastic straps ensure the blanket stays securely in place on any mattress.
- Machine Washable: Detachable controller allows for easy machine washing.

Image: A visual comparison highlighting the Mia&Coco blanket's features such as 12H Timer, Double Layer Fleece, Pressure Spot Design, and Thick Edging, contrasting them with typical features of other blankets.
3. Setup Instructions
Follow these steps to properly set up your electric heated blanket:
- Unpack: Carefully remove the blanket from its packaging. Retain packaging for future storage or transport.
- Inspect: Before first use, inspect the blanket and controller for any signs of damage. Do not use if any damage is observed.
- Positioning: Place the blanket flat on your mattress. Ensure it is spread evenly without any folds or creases.
- Secure: Use the elasticated straps to secure the blanket firmly to your mattress. This prevents shifting during use.
- Connect Controller: Ensure the controller is securely plugged into the blanket's connector.
- Power Connection: Plug the power cord into a standard electrical outlet. Ensure the outlet is easily accessible for unplugging.

Image: A woman demonstrating how the elasticated straps fit the electric blanket onto a deep mattress, indicating compatibility with mattresses up to 45cm.
4. Operating Instructions
Operating your Mia&Coco Electric Heated Blanket is simple with the LED controller.

Image: A close-up view of the electric blanket's LED controller, showing the 'Preheat', 'H' (High), 'M' (Medium), 'L' (Low) heat settings, and timer options (12h, 4h, 2h).
- Turn On: Press the 'ON' button on the controller to power on the blanket. The LED display will illuminate.
- Select Heat Setting: Use the 'TEMP' button to cycle through the heat settings: 'Preheat', 'H' (High), 'M' (Medium), and 'L' (Low).
- Preheat: Provides rapid heating for quick warmth.
- High (H): Maximum warmth.
- Medium (M): Moderate warmth.
- Low (L): Gentle warmth.
- Set Timer: Press the 'TIMER' button to select the desired operating duration: 2 hours, 4 hours, or 12 hours. The blanket will automatically shut off after the selected time has elapsed.
- Turn Off: Press the 'OFF' button to turn off the blanket. Always unplug the blanket from the wall outlet when not in use.

Image: A woman relaxing on a bed with the electric blanket, illustrating the intelligent timing feature with options for 2 hours, 4 hours, and 12 hours, emphasizing energy saving.
5. Maintenance and Care
Proper care will extend the life of your electric heated blanket.
- Disconnect Controller: Before cleaning, always ensure the blanket is unplugged from the power outlet and the controller is detached from the blanket.
- Machine Washing: The blanket is machine washable. Use a gentle cycle with cold water. Do not bleach.
- Drying: Do not tumble dry. Air dry the blanket completely before reattaching the controller and using it again. Do not iron or dry clean.
- Storage: When not in use, store the blanket in a cool, dry place. Ensure it is not folded tightly or creased, as this can damage the internal wiring.

Image: A woman placing the electric blanket into a washing machine, with an inset showing the simple mechanism for detaching the controller from the blanket for washing.
6. Troubleshooting
If you encounter issues with your electric heated blanket, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Blanket not heating | Not plugged in; Controller not connected; Power outage; Overheat protection activated. | Ensure power cord is securely plugged into outlet. Check controller connection to blanket. Verify power supply. Unplug, wait 30 minutes, and plug back in to reset overheat protection. |
| Blanket heats unevenly | Blanket is folded or creased; Internal wiring damage. | Ensure blanket is spread flat without folds. If problem persists, discontinue use and contact customer support. |
| Controller display not working | Power issue; Controller malfunction. | Check power connection. Try unplugging and re-plugging. If still not working, controller may be faulty; contact customer support. |
| Blanket automatically shuts off unexpectedly | Timer setting reached; Overheat protection activated. | This is normal if the timer has expired. If not, the overheat protection may have been triggered. Unplug, allow to cool for 30 minutes, then try again. Ensure blanket is not folded. |
If the issue persists after attempting these solutions, please contact Mia&Coco customer support for further assistance.
7. Product Specifications
Detailed specifications for your Mia&Coco Electric Heated Blanket Single:
- Brand: Mia&Coco
- Model Number: UB42B-S-C
- Colour: White
- Product Dimensions: 150 x 80 x 1.2 cm (Length x Width x Height)
- Item Weight: 1.22 kg
- Power / Wattage: 60 watts
- Voltage: 230 Volts
- Material: Polyester
- Special Features: Automatic Shut Off, 3 Heat Settings, 12-hour Timer
- Heating Elements: 2
- Date First Available: 10 July 2023

Image: A diagram illustrating the single bed size and the dimensions of the electric blanket (150x80cm) as it would appear on a bed.
8. Warranty and Support
Your Mia&Coco Electric Heated Blanket comes with a 12-month guarantee from the date of purchase, providing extra peace of mind.

Image: The electric blanket laid out on a bed, accompanied by a graphic badge indicating a '1 Year' warranty.
For warranty claims, technical support, or any questions regarding your product, please contact Mia&Coco customer service through the retailer where you purchased the item or visit the official Mia&Coco store online.
Please have your purchase receipt and product model number (UB42B-S-C) ready when contacting support.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.