1. Introduction
Thank you for purchasing the YANHAO TM518-EU Programmable Digital Timer Outlet. This device allows you to automate the power supply to your appliances, helping to save energy and enhance convenience. Please read this manual carefully before use to ensure proper operation and safety.
2. Safety Information
- For indoor use only. Do not expose to rain or moisture.
- Do not exceed the maximum load rating of 230VAC, 16A, 3000W. Overloading can cause overheating and fire.
- Ensure the timer is securely plugged into a grounded outlet.
- Do not disassemble or attempt to repair the unit. Refer all servicing to qualified personnel.
- Keep out of reach of children.
- Unplug the timer from the wall outlet before cleaning. Clean only with a dry cloth.
3. Product Overview
Familiarize yourself with the components of your YANHAO TM518-EU timer outlet.
Figure 1: Front View of Timer Outlet. This image displays the front of the YANHAO TM518-EU timer, showing the digital LCD screen at the top, followed by rows of control buttons, and a standard EU-type socket at the bottom. The screen shows "AM", "FR", "5:15", and "AUTO". Buttons include "WEEK", "HOUR", "MINUTE", "RES/RCL", "CLOCK", "TIMER", "ON/AUTO/OFF", "RANDOM", and "RESET".
Figure 2: Multi-Angle View and Specifications. This composite image shows four different perspectives of the YANHAO TM518-EU timer. The top-left shows a front-side view, the top-right a side view, the bottom-left a back view with the EU plug, and the bottom-right a back-side view. The back of the device clearly displays the model number (TM518-EU), power rating (230V~ 50Hz, Max 16(2)A 3000W), and battery standby information (120 days).
Key Components:
- LCD Display: Shows current time, day, and program status.
- WEEK Button: Sets the day of the week.
- HOUR Button: Sets the hour.
- MINUTE Button: Sets the minute.
- RES/RCL Button: Resets or recalls program settings.
- CLOCK Button: Used to set the current time and exit programming mode.
- TIMER Button: Enters programming mode to set ON/OFF times.
- ON/AUTO/OFF Button: Manually switches the timer output between ON, AUTO (programmed), and OFF.
- RANDOM Button: Activates or deactivates the random ON/OFF function.
- RESET Button (Recessed): Clears all settings and programs. Requires a pointed object to press.
- EU Socket: Output for connecting your appliance.
- EU Plug: Input for connecting the timer to a wall outlet.
4. Setup
- Initial Charge: Before first use, plug the timer into a live wall outlet for at least 30 minutes to charge the internal backup battery. This battery retains settings during power outages.
- Resetting the Timer: If the display is blank or shows erratic characters, or if you wish to clear all previous settings, insert a small pointed object (like a pen tip) into the recessed RESET hole and press firmly. The display will show "0:00" and all settings will be cleared.
- Setting Current Time:
- Press and hold the CLOCK button.
- While holding CLOCK, press the WEEK button repeatedly until the correct day of the week is displayed.
- While holding CLOCK, press the HOUR button repeatedly until the correct hour is displayed.
- While holding CLOCK, press the MINUTE button repeatedly until the correct minute is displayed.
- Release the CLOCK button. The current time is now set.
5. Operating Instructions (Programming)
The timer allows you to set up to 10 ON/OFF programs. Each program consists of an ON time and an OFF time.
5.1 Setting ON/OFF Programs
- Press the TIMER button once. The display will show "1 ON". This indicates you are setting the first ON time.
- Press the WEEK button to select the desired day(s) for this program. Options include individual days, weekdays, weekends, or all 7 days.
- Press the HOUR button to set the desired hour for the ON time.
- Press the MINUTE button to set the desired minute for the ON time.
- Press the TIMER button again. The display will show "1 OFF". This indicates you are setting the first OFF time.
- Repeat steps 2-4 to set the desired day(s), hour, and minute for the OFF time. (Note: The day selection for OFF time will typically match the ON time, but can be adjusted if needed for programs spanning midnight).
- To set additional programs (2 ON/OFF through 10 ON/OFF), press the TIMER button repeatedly and follow steps 2-6 for each program.
- Once all desired programs are set, press the CLOCK button to exit programming mode and return to the current time display.
5.2 Manual Override (ON/AUTO/OFF)
Press the ON/AUTO/OFF button repeatedly to cycle through the following modes:
- ON: The timer output is continuously ON, overriding all programs.
- AUTO: The timer operates according to the programmed ON/OFF times. This is the standard operating mode for automated control.
- OFF: The timer output is continuously OFF, overriding all programs.
Ensure the timer is in AUTO mode for your programs to function.
5.3 Random Function
The RANDOM function is designed to give a "lived-in" appearance to your home by randomly turning connected lights or appliances ON and OFF within a specific time window (e.g., 6 PM to 6 AM). This can be useful for security purposes when you are away.
- To activate: Press the RANDOM button. "RANDOM" will appear on the display.
- To deactivate: Press the RANDOM button again. "RANDOM" will disappear from the display.
Note: The random function typically operates only when the timer is in AUTO mode and within a predefined evening/night period. Consult the display for specific indications.
5.4 Clearing Programs
To clear a specific ON/OFF program:
- Press the TIMER button repeatedly until the program you wish to clear is displayed (e.g., "3 ON").
- Press the RES/RCL button. The display for that specific ON/OFF program will show "--:--", indicating it has been cleared.
- Repeat for the corresponding OFF program.
- Press CLOCK to exit.
To clear all programs and settings, use the recessed RESET button as described in the Setup section.
6. Maintenance
- Cleaning: Unplug the timer from the wall outlet before cleaning. Wipe the exterior with a soft, dry cloth. Do not use liquid cleaners or abrasive materials.
- Battery: The internal battery is designed for long-term use and maintains settings during power interruptions. If the timer is stored for extended periods, plug it in for a few hours every few months to keep the battery charged.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Display is blank or erratic. | Internal battery is low or unit needs reset. | Plug the timer into a live outlet for 30 minutes to charge. Press the recessed RESET button. |
| Appliance does not turn ON/OFF at programmed times. | Timer is not in AUTO mode, programs are incorrect, or appliance is not working. | Press ON/AUTO/OFF until "AUTO" is displayed. Verify program settings using the TIMER button. Test the appliance directly in the wall outlet. |
| Random function is not working. | Random function not activated or timer not in AUTO mode. | Ensure "RANDOM" is displayed. Ensure the timer is in AUTO mode. |
| Cannot set current time or programs. | Buttons not pressed correctly or unit needs reset. | Follow the instructions in Section 4.3 and 5.1 carefully. Press the recessed RESET button and try again. |
8. Specifications
- Model: TM518-EU
- Voltage: 230V AC
- Frequency: 50Hz
- Max Load: 16A / 3000W
- Minimum Setting Time: 1 minute
- Operating Temperature: -10°C to +40°C
- Accuracy: +/- 1 minute per month
- Backup Battery: NiMH 1.2V, standby 120 days (approx.)
- Programs: Up to 10 ON/OFF programs
9. Warranty and Support
YANHAO products are manufactured to high-quality standards. For warranty information or technical support, please refer to your purchase documentation or contact the retailer where the product was purchased. Please have your model number (TM518-EU) and purchase date available when contacting support.
