1. Important Safety Information
Before operating your Holy Stone HS720G drone, please read this manual thoroughly and understand all safety precautions. Failure to follow instructions may result in injury, damage to the drone, or property damage. Always fly responsibly and adhere to local regulations.
FAA Compliance: The HS720G drone features built-in Remote ID, fulfilling FAA requirements. No additional remote ID module is needed. Ensure you are familiar with all applicable drone regulations in your operating area, including registration and pilot certification if required.
- Always maintain a safe distance from people, animals, and obstacles.
- Do not fly near airports or in restricted airspace.
- Avoid flying in strong winds, rain, or other adverse weather conditions.
- Ensure the drone's battery and remote controller are fully charged before each flight.
- Perform a pre-flight check of all components to ensure they are securely attached and functioning correctly.
2. Product Overview and Components
The Holy Stone HS720G is a foldable drone equipped with a 2-axis gimbal and 4K EIS camera, designed for stable aerial photography and videography. It features powerful brushless motors and intelligent flight modes.
What's in the Box:
- Holy Stone HS720G Drone
- Remote Controller (Transmitter)
- 2 x Lithium Polymer Batteries (2950 mAh each)
- Spare Propellers
- USB Charging Cables
- Screwdriver
- User Manual
- Warranty Card

3. Setup
3.1 Unfolding the Drone
Carefully unfold the drone arms until they lock into place. Ensure all four arms are fully extended before flight.

3.2 Battery Installation and Charging
Insert a fully charged battery into the drone's battery compartment until it clicks securely into place. To charge the batteries, use the provided USB charging cables and connect them to a suitable USB power source. The batteries offer up to 52 minutes of flight time with two batteries (26 minutes per battery).

3.3 Remote Controller Setup
Install 2 AA batteries (not included) into the remote controller. Extend the phone holder and antennas. The remote controller features a digital display for flight information and controls for various drone functions.

3.4 Propeller Installation (if needed)
If propellers are not pre-installed or need replacement, use the provided screwdriver to attach them according to the markings (A and B) on the propellers and motor arms. Ensure they are securely fastened.
3.5 App Download and Connection
Download the Holy Stone app from your device's app store. Power on the drone and the remote controller. Connect your smartphone to the drone's Wi-Fi network (usually named