Candle Warmers Etc. White & Wood Arched Lamp Instruction Manual

Introduction

The Candle Warmers Etc. White & Wood Arched Lamp provides a flame-free method for enjoying scented candles. This top-down warming technology melts candles safely, releasing fragrance without the need for an open flame, eliminating soot, smoke, and fire hazards. It is designed to deliver a cleaner, stronger scent that lasts longer than traditional burning methods.

Image: The White & Wood Arched Lamp with a candle, showcasing its design.

Safety Information

Please read and understand all safety instructions before using this product.

• This product is designed for use with jar candles up to 22 oz and 6 inches tall.
• Ensure the lamp is placed on a stable, heat-resistant surface.
• Keep the lamp and candle away from flammable materials.
• Do not leave the lamp unattended for extended periods.
• Keep out of reach of children and pets.
• The lamp uses an NP1 warming bulb. Only use the specified bulb type for replacement.
• This is a corded electric device. Ensure the cord is not damaged or frayed.

Image: Visual representation of the lamp's safety features, highlighting flame-free operation.

Setup

1. Unpack all components: the arched lamp, wooden base, and NP1 warming bulb.
2. Carefully screw the NP1 warming bulb into the socket located under the lamp shade.
3. Place the lamp on a flat, stable surface.
4. Position your desired jar candle (up to 22 oz and 6 inches tall) onto the circular indentation on the wooden base, directly beneath the warming bulb.
5. Plug the 3-foot power cord into a standard electrical outlet.

Image: The candle warmer accommodating a jar candle, illustrating its capacity.

Operating Instructions

Once set up, operating your candle warmer is simple:

1. Ensure a candle is properly placed on the base.
2. Locate the roller switch on the power cord.
3. Slide the switch to the 'ON' position to activate the warming bulb. The bulb will begin to melt the top layer of the candle wax.
4. Fragrance will be released within minutes as the wax pool forms.
5. To turn off the lamp, slide the switch to the 'OFF' position.

Image: Close-up of the roller switch for easy operation.

Video Demonstration

Maintenance

• To clean the lamp, ensure it is unplugged and cool. Wipe surfaces with a soft, dry cloth. Do not use abrasive cleaners.
• The NP1 warming bulb has an average lifespan of 2,000 hours. When the bulb needs replacement, ensure the lamp is unplugged and cool before carefully unscrewing the old bulb and screwing in a new NP1 bulb.

Image: The replaceable NP1 warming bulb.

Troubleshooting

• Lamp not turning on: Check if the power cord is securely plugged into the outlet and the roller switch is in the 'ON' position. Ensure the warming bulb is correctly installed and not burnt out. Replace the bulb if necessary.
• No fragrance release: Confirm the lamp is on and the bulb is heating. Ensure the candle is placed directly under the bulb. Some candles may take longer to release fragrance, especially on first use.
• Weak fragrance: The top layer of wax may have lost its scent. Carefully pour off a small amount of the melted wax to expose a fresh layer.

Specifications

Warranty and Support

For warranty information or product support, please refer to the packaging or contact Candle Warmers Etc. customer service directly. Contact details can typically be found on the manufacturer's website or product documentation.