MOLGRIA SKYLOONG GK980 98-Key RGB Mechanical Keyboard User Manual

1. Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your MOLGRIA SKYLOONG GK980 98-Key RGB Mechanical Keyboard. Please read this manual thoroughly to ensure proper use and to maximize your keyboard's functionality.

Image 1.1: Overview of the MOLGRIA SKYLOONG GK980 keyboard, showcasing its 98-key layout and RGB backlighting.

2. Package Contents

Verify that all items are present in your package:

• MOLGRIA SKYLOONG GK980 Mechanical Keyboard
• Type-C to USB Connection Cable
• Keycap Puller
• Switch Puller
• Spare Keycaps (specific to theme)
• Spare Switches
• Spare Stabilizer Board
• Spare Knob

Image 2.1: Contents of the MOLGRIA SKYLOONG GK980 package, including the keyboard, USB-C cable, keycap puller, switch puller, and spare components.

3. Setup

3.1 Connecting the Keyboard

1. Locate the Type-C port on the back of the keyboard.
2. Connect the Type-C end of the provided cable to the keyboard.
3. Connect the USB-A end of the cable to an available USB port on your computer (Windows PC or Mac).
4. The keyboard will be automatically recognized by your operating system.

The MOLGRIA SKYLOONG GK980 keyboard operates exclusively via a wired USB-C connection. It does not support Bluetooth or other wireless connections.

Image 3.1: The keyboard connected via its USB-C cable, highlighting its wired-only operation and RGB backlighting.

3.2 Adjusting Keyboard Angle

The keyboard features a three-stage leg brace system, allowing you to adjust the typing angle for ergonomic comfort. Extend the feet to select your preferred angle (4°, 7°, or 10°).

Image 3.2: Illustration of the three-stage adjustable leg braces on the keyboard, offering 4°, 7°, and 10° typing angles.

4. Operating Instructions

4.1 Key Functions and Layout

The GK980 features a 98-key layout, which includes a numeric keypad and most standard key functions, while maintaining a compact form factor. This design reserves approximately 60mm more desk space compared to a full 104-key keyboard.

Image 4.1: Comparison of the 98-key layout of the GK980 with a standard 104-key layout, highlighting space efficiency.

4.2 RGB Backlighting

The keyboard features RGB backlighting with 4-side transparent pudding keycaps, allowing light to pass through for various visual effects. Specific keystroke combinations are used to switch between multiple RGB lighting modes. Refer to the software section for advanced customization.

4.3 Multi-function Knob

The integrated knob on the keyboard is primarily defined for volume adjustment (Volume Up, Volume Down, Mute). Additional functions for the knob can be programmed using the dedicated driver software.

Image 4.2: Close-up of the multi-function knob, indicating its primary use for volume control and programmability.

4.4 Software and Programmability

The keyboard is programmable for both Windows and Mac OS. Dedicated driver software allows users to customize key functions (except FN keys), RGB lighting effects, and additional knob functions. The software can be downloaded from the official MOLGRIA or Skyloong website.

Image 4.3: Screenshots of the driver software interface for both Windows and Mac OS, demonstrating customization options.

5. Maintenance

5.1 Cleaning the Keyboard

• Disconnect the keyboard from your computer before cleaning.
• Use a soft, lint-free cloth slightly dampened with water or a mild cleaning solution to wipe the keycaps and frame.
• For deeper cleaning, use the provided keycap puller to remove keycaps and clean underneath with compressed air or a small brush.
• Ensure the keyboard is completely dry before reconnecting it.

5.2 Hot-Swappable Switches

The GK980 features hot-swappable mechanical switches, allowing you to change switches without soldering. The keyboard is compatible with 3-pin or 5-pin BOX, TTC, or Cherry MX style mechanical switches. It does not support circular pin mechanical switches.

1. Disconnect the keyboard from your computer.
2. Use the provided switch puller to carefully grip the switch from the top and bottom, then pull it straight up to remove.
3. Align the pins of the new switch with the holes on the PCB. Ensure the pins are straight.
4. Gently press the new switch into place until it clicks securely. Do not force the switch if it does not go in smoothly; check pin alignment.

Image 5.1: Demonstration of removing and replacing hot-swappable mechanical switches, showing compatible switch types.

5.3 Keycap Replacement

The keyboard comes with ASA profile pudding keycaps. You can replace them with other compatible keycaps using the keycap puller.

1. Disconnect the keyboard.
2. Use the keycap puller to gently grasp the keycap and pull it straight up.
3. Align the new keycap with the switch stem and press down firmly until it is seated.

Image 5.2: Close-up view of the ASA profile pudding keycaps, with some keycaps removed to show their design.

6. Troubleshooting

7. Specifications

• Model: GK980
• Layout: 98-Key
• Connectivity: Type-C Wired
• Switches: Hot-Swappable Red Mechanical Switches (compatible with 3/5-pin BOX/TTC/Cherry MX style)
• Keycaps: ASA Profile, 4-Side Transparent Pudding Keycaps (PBT Top and ABS Transparent)
• Backlighting: RGB
• Programmability: Yes (via driver software for Win/Mac OS)
• Adjustable Angle: 3-stage leg brace (4°, 7°, 10°)
• Material: Polybutylene Terephthalate (Keycaps)
• Color: Black
• Item Weight: 3.41 pounds
• Package Dimensions: 16.06 x 7.48 x 1.89 inches
• Manufacturer: Skyloong
• Compatible Devices: PC, MAC

Image 7.1: Exploded view of the keyboard components, illustrating the internal structure including keycaps, switches, plate, PCB, and case foam.

8. Warranty and Support

Information regarding product warranty and customer support was not provided in the available product data. For warranty details or technical assistance, please refer to the official MOLGRIA or Skyloong website, or contact your retailer directly.