Introduction
This instruction manual provides detailed guidance for the safe and effective setup, operation, and maintenance of your Haunted Hill Farm 7-Ft. Tall Towering Werewolf animatronic. Please read all instructions carefully before assembly and use to ensure proper function and longevity of your product.
Figure 1: The 7-Ft. Tall Towering Werewolf animatronic.
Safety Information
To prevent injury or damage to the product, observe the following safety guidelines:
- This product is intended for indoor or covered outdoor use only. Protect it from direct exposure to weather elements such as rain, snow, and strong winds.
- Ensure the product is placed on a stable, level surface to prevent tipping.
- Keep hands and loose clothing away from moving parts during operation.
- Do not attempt to modify or repair the product. Refer all servicing to qualified personnel.
- Unplug the animatronic from the power source when not in use or before cleaning.
- This product contains components that may be subject to California Proposition 65 warnings.
Package Contents
Before beginning assembly, verify that all components are present:
- Werewolf creature parts
- Assembly instructions
- UL plug-in adapter
- All necessary hardware for assembly
Figure 2: Components required for assembly.
Setup and Assembly
Unpacking
Carefully remove all components from the packaging. Retain packaging for future storage. Inspect all parts for any signs of damage. If any parts are damaged or missing, do not proceed with assembly and contact customer support.
Assembly Steps
Follow the included detailed assembly instructions provided in your package. General steps typically include:
- Assemble the base structure according to the diagrams.
- Attach the leg components to the base.
- Connect the torso and head sections, ensuring all electrical connections are secure.
- Drape and secure the fabric and fur elements as instructed to achieve the desired appearance.
- Ensure all connections are firm and the animatronic is stable before proceeding.
Figure 3: The werewolf animatronic after assembly.
Operating Instructions
Power Connection
Once assembled, connect the UL plug-in adapter to the designated port on the animatronic, then plug it into a standard electrical outlet. Ensure the outlet is easily accessible.
Activation and Features
The Towering Werewolf is motion-sensor activated, with a detection range of up to 6.5 feet. When activated, it performs the following actions:
- Movement: Head and torso move from side to side. Jaws open to reveal ferocious teeth.
- Sound: Emits blood-chilling sounds including snarling, growling, and howling.
- Lights: Green LED eyes illuminate, piercing the darkness.
An adjustable volume knob allows you to set the sound effects to your preferred noise level. The animatronic also features an on/off switch for manual control.
Figure 4: Detailed view of the werewolf's head and glowing eyes.
Figure 5: Key features of the Towering Werewolf.
Video 1: Demonstration of the Towering Werewolf's motion and sound features. This video showcases the animatronic's head and torso movement, jaw articulation, and sound effects.
Maintenance and Care
Proper care will extend the life of your animatronic:
- Cleaning: Wipe clean with a soft, dry cloth. Do not use abrasive cleaners or immerse in water.
- Storage: When not in use, store the animatronic in its original packaging or a similar protective container in a cool, dry place, away from direct sunlight and extreme temperatures.
- Inspection: Periodically check all wires and connections for any signs of wear or damage.
Troubleshooting
If your Towering Werewolf is not functioning as expected, refer to the following common issues and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Animatronic does not activate. | No power; Motion sensor obstructed or out of range; On/Off switch in 'Off' position. | Ensure UL adapter is securely plugged into both the animatronic and a working outlet. Clear any obstructions from the motion sensor. Move closer to the sensor or ensure it's facing an active area. Check that the On/Off switch is in the 'On' position. |
| No sound or low sound. | Volume knob set too low; Speaker obstruction; Power issue. | Adjust the volume knob to increase sound level. Ensure nothing is blocking the speaker. Verify power connection. |
| Movement is erratic or non-existent. | Obstruction of moving parts; Internal mechanism issue; Power issue. | Check for any physical obstructions preventing movement. Ensure the animatronic is on a stable surface. Verify power connection. If the issue persists, contact customer support. |
Product Specifications
| Model Number | HHTWRWOLF-1FLSA |
| Dimensions (L x W x H) | 38"D x 38"W x 84"H (38 inches x 38 inches x 84 inches) |
| Item Weight | 22 Pounds |
| Material | Plastic |
| Power Source | UL Plug-in Adapter |
| Activation | Motion Sensor (up to 6.5 feet) |
| Recommended Use | Indoor or Covered Outdoor |
| Included Components | Creature parts, assembly instructions, warranty |
Figure 6: Product dimensions.
Warranty and Support
Warranty Information
This product includes a manufacturer's warranty. Please refer to the specific warranty documentation included in your package for details regarding coverage, terms, and conditions.
Customer Support
For technical assistance, missing parts, or warranty claims, please contact Haunted Hill Farm customer support. Refer to the contact information provided in your product packaging or visit the official Haunted Hill Farm website for support resources.
You can also visit the Haunted Hill Farm Store on Amazon for more information and products.