1. Introduction
Thank you for choosing the CAROMIO Heated Sherpa Electric Throw Blanket. This manual provides essential information for the safe and efficient use of your new electric blanket. Please read all instructions carefully before use and retain this manual for future reference.
This blanket is designed to provide warmth and comfort with its soft sherpa material, multiple heat settings, and convenient timer functions. It is ETL certified for safety and is machine washable for easy care.
2. Safety Instructions
- Read All Instructions: Familiarize yourself with the operation and safety features before first use.
- Overheat Protection: The blanket is equipped with intelligent NTC&PTC heating wires that continuously monitor and regulate temperature to prevent overheating.
- Automatic Shut-off: The blanket automatically shuts off after 8 hours on first use, and offers 1-10 hour timer settings for added safety and energy saving.
- Proper Use: Do not fold or bunch the heated blanket during use to avoid overheating.
- Power Cord: Ensure the power cord is not pinched, bent, or damaged. Do not use if the cord or controller is damaged.
- Cleaning: Always remove the heating controller before washing. Follow machine washing instructions carefully.
- Storage: Store the blanket in a cool, dry place when not in use.
Figure 1: Overheat protection feature ensures safe operation.
3. Product Overview
3.1 Features
- Premium Material: Crafted with thickened 240GSM jacquard long plush sherpa on one side and 220GSM sherpa on the other for exceptional softness.
- Enhanced Heating System: Upgraded and 10% extended heating wires provide a larger heating area and rapid warmth within 20 minutes.
- Adjustable Heat Settings: 10 heat levels with a maximum temperature of 122°F.
- Programmable Timer: Auto shut-off options from 1 to 10 hours.
- Safety Certified: ETL certified with intelligent NTC&PTC heating wires for real-time temperature monitoring and overheat protection.
- Convenient Control: LCD controller for easy monitoring and adjustment.
- Machine Washable: Easy to clean by removing the heating controller.
3.2 Components
- Heated Sherpa Electric Throw Blanket
- Detachable LCD Controller
- Power Cord
Figure 2: Internal structure and materials of the heated blanket.
4. Setup
- Unpack: Carefully remove the blanket and controller from its packaging.
- Inspect: Check the blanket and controller for any signs of damage. Do not use if damaged.
- Connect Controller: Locate the connector on the blanket and firmly plug in the detachable controller. Ensure a secure connection.
- Placement: Lay the blanket flat on your bed, sofa, or desired surface. Ensure it is not folded or bunched.
- Plug In: Plug the power cord into a standard 120V AC electrical outlet.
Figure 3: Proper placement of the heated blanket for use.
5. Operating Instructions
- Turn On: Press the 'On/Off' button on the controller to turn on the blanket. The display will light up.
- Adjust Heat Level: Use the '+' and '-' buttons to select your desired heat level from 1 to 10 (H). Level 1 is the lowest, and H is the highest (122°F).
- Set Timer: Press the 'Timer' button to activate the auto-shutoff function. Use the '+' and '-' buttons to set the desired operating time from 1 to 10 hours. The blanket will automatically turn off after the set time.
- Pre-Heat Function: To pre-heat your blanket, select a higher heat setting approximately 20 minutes before use.
- Turn Off: Press the 'On/Off' button again to turn off the blanket. Unplug from the outlet when not in use.
Figure 4: LCD Controller for heat and timer settings.
6. Care and Maintenance
- Disconnect Power: Always unplug the blanket from the wall outlet before cleaning.
- Detach Controller: Carefully disconnect the controller from the blanket.
- Machine Wash: Machine wash the blanket in cold water on a gentle cycle. Do not bleach or iron.
- Drying: Tumble dry on a low-temperature setting. Gently stretch the blanket back to its original size after washing for optimal performance. Ensure the blanket is completely dry before reconnecting the controller or storing.
- Storage: When not in use, store the blanket in its original packaging or a breathable bag in a cool, dry place.
Figure 5: Washing and care instructions for your blanket.
7. Troubleshooting
- Blanket Not Heating:
- Ensure the power cord is securely plugged into both the blanket and the wall outlet.
- Check if the wall outlet is functional by plugging in another appliance.
- Verify that the heat setting is not on '0' or 'Off'.
- Blanket Stops Working:
- The automatic shut-off timer may have been activated. Reset the timer or turn the blanket back on.
- The overheat protection may have engaged. Unplug the blanket, let it cool for a few minutes, and then try again.
- If issues persist, please refer to the Warranty and Support section.
- Uneven Heating:
- Ensure the blanket is laid flat and not folded or bunched, which can restrict heat distribution.
8. Specifications
| Attribute | Value |
|---|---|
| Brand | CAROMIO |
| Model Name | OB20-001A |
| Item Model Number | BM-P0211C |
| Material | Sherpa, Polyester |
| Color | Off White |
| Size | Throw 50"x60" |
| Product Dimensions | 60"L x 50"W |
| Item Weight | 3.54 pounds (1.61 Kilograms) |
| Heating Levels | 10 |
| Time Settings | 1-10 Hours Auto Shut-off |
| Certification | ETL Certified |
| Care Instructions | Machine Washable |
Figure 6: Available sizes and cord lengths.
9. Warranty and Support
CAROMIO provides a 1-year service coverage for quality issues with this product. If you encounter any problems or have questions, please contact our customer support team.
Customer Support: Please reach out to us via email for assistance. We are committed to providing a solution for your order within one year of purchase.
For further assistance, please visit the CAROMIO Store on Amazon.
