Important Safety Instructions
Please read this entire instruction manual before using your G-Ocean GHTF1502 space heater. Failure to follow these instructions may result in fire, electric shock, injury, or property damage. Keep this manual for future reference.
- Electrical Connection: Always plug the heater directly into a 120V AC, 60Hz wall outlet. Never use with an extension cord, power strip, or surge protector, as this can lead to overheating and fire hazards.
- Placement: Position the heater on a firm, level surface. Maintain a minimum clearance of 3 feet (0.9 meters) from any combustible materials such as furniture, pillows, bedding, papers, clothes, and curtains.
- Ventilation: Do not block air intakes or exhaust openings. Ensure proper airflow around the heater.
- Overheat Protection: The heater is equipped with an automatic overheat protection system. If the heater overheats, it will automatically shut off. Unplug the unit, allow it to cool for 30 minutes, then plug it back in.
- Tip-Over Protection: The heater features a safety tip-over switch that automatically shuts off the unit if it is accidentally knocked over. If this occurs, place the heater upright on a stable surface to resume operation.
- Water and Moisture: Do not use the heater in wet or moist locations, such as bathrooms, laundry areas, or near sinks. Never immerse the heater in water.
- Children and Pets: Close supervision is necessary when the heater is used by or near children or individuals with reduced physical, sensory, or mental capabilities.
- Maintenance: Unplug the heater before cleaning or performing any maintenance.
- ETL Certified: This product is ETL certified, ensuring it meets recognized safety standards.
Image: G-Ocean GHTF1502 heater highlighting its safety features including Overheat Protection, Tip-over Protection, V0 Flame Retardant materials, and cETLus Certification.
Product Overview
The G-Ocean GHTF1502 is a 34-inch oscillating ceramic tower space heater designed for indoor use. It features 1500W PTC heating elements for rapid and efficient heating, a digital display, adjustable thermostat, 12-hour timer, and remote control for convenient operation. Its tall design ensures widespread heat distribution.
Key Features:
- Powerful Heating: 1500W PTC ceramic heating for quick warmth.
- Adjustable Thermostat: Temperature range from 60°F to 90°F.
- Oscillation: 70° oscillation for wide heat distribution.
- Multiple Modes: Heat (High/Low) and Fan modes.
- Timer Function: Programmable 1 to 12-hour timer.
- Remote Control: Full control from a distance.
- Safety Features: Overheat and Tip-Over Protection.
- Quiet Operation: Designed for minimal noise output (approx. 40dB).
Image: The G-Ocean GHTF1502 34-inch ceramic tower space heater with its remote control, illustrating the warm air output.
Image: Detailed dimensions of the G-Ocean GHTF1502 heater, measuring 12.4 inches (D) x 12.4 inches (W) x 34 inches (H).
Setup
Unpacking:
- Carefully remove the heater from its packaging.
- Remove all packaging materials, including any protective films or inserts.
- Inspect the heater for any signs of damage. If damaged, do not operate and contact customer support.
Placement:
- Place the heater on a stable, level, and heat-resistant surface.
- Ensure the heater is at least 3 feet (0.9 meters) away from walls, furniture, curtains, and other combustible materials.
- Do not place the heater directly below a power outlet.
- Ensure the power cord is not pinched or placed under the heater.
Operating Instructions
The G-Ocean GHTF1502 heater can be operated using the control panel on top of the unit or the included remote control.
Control Panel and Remote Control:
The control panel features a digital display and touch buttons for various functions. The remote control duplicates these functions for convenience.
Image: Close-up of the heater's control panel and remote, showing temperature adjustment options.
Basic Operation:
- Power On/Off: Plug the heater into a 120V AC wall outlet. Press the Power button (⏻) on the control panel or remote to turn the unit on or off. The digital display will illuminate.
- Mode Selection: Press the Mode button (often labeled 'HEATER' or with a fan/heat icon) to cycle through the available modes: High Heat, Low Heat, and Fan Only.
- Temperature Adjustment: In heating mode, press the SET TEMP (⬆ / ⬇) buttons to set your desired temperature between 60°F and 90°F. The heater will automatically maintain the set temperature.
- Oscillation Function: Press the SWING button (↻) to activate or deactivate the 70° oscillation feature, which helps distribute heat evenly across a wider area.
- Timer Function: Press the TIMER button (⏱) to set the auto-off timer from 1 to 12 hours. Each press increases the timer by one hour. The heater will automatically turn off after the set time.
- Child Lock: Press the LOCK button on the remote control to activate or deactivate the child lock feature, preventing accidental changes to settings.
Image: The G-Ocean GHTF1502 heater operating with 70-degree oscillation, effectively heating a room area of 200-320 square feet.
Image: The G-Ocean GHTF1502 heater providing quiet warmth in a bedroom, featuring a 12-hour timer and operating at approximately 40dB.
Maintenance
Regular maintenance helps ensure the longevity and efficient operation of your heater. Always unplug the heater from the power outlet before cleaning or performing any maintenance.
Cleaning:
- Exterior: Use a soft, damp cloth to wipe the exterior surfaces of the heater. Do not use abrasive cleaners or solvents, as these may damage the finish.
- Air Intake/Outlet: Use a vacuum cleaner with a brush attachment to gently remove dust and lint from the air intake and outlet grilles. Ensure these areas are clear of obstructions.
- Do not allow water to drip into the interior of the heater.
Storage:
- If storing the heater for an extended period, clean it thoroughly as described above.
- Store the heater in its original packaging or a suitable container to protect it from dust and damage.
- Store in a cool, dry place, away from direct sunlight and extreme temperatures.
Troubleshooting
If you experience issues with your heater, please refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Heater does not turn on. | Not plugged in; Power outlet malfunction; Tip-over switch activated; Overheat protection activated. | Ensure plug is firmly in outlet; Test outlet with another device; Place heater upright on a flat surface; Unplug, wait 30 mins, then plug back in. |
| Heater stops working unexpectedly. | Overheat protection activated; Tip-over switch activated; Timer function expired. | Unplug, wait 30 mins, then plug back in; Place heater upright; Check timer settings. |
| Insufficient heat output. | Low heat mode selected; Temperature setting too low; Room size exceeds heating capacity; Air intakes/outlets blocked. | Select High Heat mode; Increase desired temperature; Ensure heater is appropriate for room size (200-320 sq ft); Clean air grilles. |
| Unusual vibration noise. | Loose internal component; Heater not on a level surface. | Ensure heater is on a stable, level surface. If noise persists, contact customer support. |
If the problem persists after attempting these solutions, please contact G-Ocean customer support for further assistance.
Specifications
| Feature | Specification |
|---|---|
| Brand | G-Ocean |
| Model | GHTF1502 |
| Type | Ceramic Tower Space Heater |
| Color | Black |
| Product Dimensions | 12.4"D x 12.4"W x 34"H |
| Item Weight | 21 pounds |
| Power Output | 1500W |
| Voltage | 120 Volts |
| Amperage | 12.5 Amps |
| Heating Coverage | 200-320 Sq.ft |
| Temperature Range | 60°F - 90°F |
| Oscillation | 70° |
| Timer | 1-12 Hours |
| Safety Features | Overheat Protection, Tip-Over Protection, V0 Flame Retardant |
| Certifications | ETL Certified |
Customer Support
For any questions, concerns, or assistance with your G-Ocean GHTF1502 space heater, please contact G-Ocean customer support. Refer to your product packaging or the G-Ocean official website for contact information.