UKing 60W Stage Bar Light User Manual

Introduction

Thank you for purchasing the UKing 60W Stage Bar Light. This versatile lighting system is designed to create dynamic and vibrant atmospheres for various events, including parties, concerts, weddings, and KTVs. It features a unique combination of RGBW LED Par lights and Derby beam effects, offering multiple control modes for flexible operation. Please read this manual thoroughly before operation to ensure safe and optimal performance.

Safety Instructions

• Always connect the unit to a grounded power outlet.
• Ensure the voltage of the power supply matches the voltage specified on the unit.
• Do not expose the unit to rain or moisture.
• Avoid direct eye exposure to the light source.
• Disconnect from power before cleaning or servicing.
• Do not attempt to repair the unit yourself. Refer all servicing to qualified personnel.
• Ensure proper ventilation around the unit to prevent overheating.
• Keep the unit away from flammable materials.

Package Contents

Verify that all items listed below are included in your package:

• 1 x Set of Par Light
• 1 x Stand
• 1 x Remote Control
• 1 x Power Cable
• 1 x User Manual

Figure 1: Contents of the product package, showing the main light unit, tripod stand, remote control, power cables, and user manual.

Product Overview

The UKing 60W Stage Bar Light combines two RGBW LED Par lights and two RGBW Derby beam lights on a single bar, mounted on an adjustable tripod stand. This integrated design provides a comprehensive lighting solution.

Figure 2: The UKing 60W Stage Bar Light in operation, showcasing its vibrant light output.

Components and Dimensions

Figure 3: Detailed dimensions of the light bar and individual light units, along with the adjustable height range of the stand (146cm to 180cm).

Rear Panel Interface

Figure 4: Rear panel connections and controls. From left to right: Power Input, Fuse (F3A 250V), DMX Input/Output, LED Display, and Function Buttons (MENU, UP, DOWN, ENTER). The 35mm stand adapter is located centrally below the bar.

Setup

1. Unpack: Carefully remove all components from the packaging.
2. Assemble Stand: Extend the legs of the tripod stand to a stable position.
3. Attach Light Bar: Mount the light bar onto the 35mm stand adapter on top of the tripod stand. Secure it firmly using the locking mechanism.
4. Adjust Height: Adjust the height of the stand to your desired level (between 146cm and 180cm) and lock it in place.
5. Connect Power: Plug the power cable into the power input on the rear panel of the light bar, then connect it to a suitable grounded power outlet.
6. Optional DMX Connection: If using DMX control, connect DMX cables from your DMX controller to the DMX IN port, and from DMX OUT to other DMX devices if chaining.

Figure 5: Example setup of multiple light units for larger coverage.

Operating Modes

The UKing 60W Stage Bar Light supports four primary operating modes, which can be selected via the remote control or the unit's control panel.

• Auto Mode: The light unit runs through pre-programmed light shows automatically.
• Sound-Activated Mode: The lights react to the beat of music or sound detected by the built-in microphone.
• Remote Control Mode: Control various functions and modes using the included IR remote control.
• DMX Mode (3/6/15 Channels): For professional control, connect to a DMX controller to precisely manage colors, patterns, and movement.

Figure 6: Overview of the multiple operating modes available for the lighting system.

Remote Control Functions

The included remote control provides convenient access to various functions and modes. Ensure the remote is pointed towards the IR receiver on the light bar.

Figure 7: Remote control layout and button functions.

Figure 8: Detailed remote control functions with English descriptions.

• ON/OFF: Powers the unit on or off.
• DMX: Activates DMX control mode.
• AUTO MIX: Mix Auto Mode.
• SOUND MIX: Mix Sound Mode.
• PAR JUMP: LED Par Jump Mode.
• PAR: LED Par Auto Mode.
• GRADUAL: LED Par Color Fade.
• LED: LED Par Sound Mode.
• FASH: LED Par Strobe Mode.
• COLOR +/-: Adjusts color settings.
• MOTOR +/-: Adjusts motor speed (for Derby effects).
• SEN +/-: Adjusts sound sensitivity in sound-activated modes.

DMX Control

The UKing 60W Stage Bar Light can be controlled via DMX512 protocol, offering precise control over its functions. It supports 3, 6, or 15 DMX channels, depending on the selected mode on the unit's display.

Connect your DMX controller to the DMX IN port using a standard 3-pin XLR cable. If chaining multiple units, connect from the DMX OUT of the first unit to the DMX IN of the next. Refer to the DMX channel chart (not provided in this manual, typically found in a separate DMX protocol sheet) for specific channel assignments and values.

Maintenance

• Cleaning: Regularly clean the lenses and housing with a soft, lint-free cloth. Do not use abrasive cleaners.
• Fuse Replacement: If the unit does not power on, check the fuse located on the rear panel. Replace with a fuse of the same type and rating (F3A 250V).
• Storage: Store the unit in a dry, dust-free environment when not in use.
• Inspection: Periodically inspect power cables and DMX cables for any damage.

Troubleshooting

Specifications

Warranty and Support

This product comes with a standard manufacturer's warranty. For detailed warranty information, please refer to the warranty card included with your purchase or visit the official U`King website. For technical support, troubleshooting assistance, or spare parts, please contact U`King customer service through their official channels. Keep your purchase receipt as proof of purchase for warranty claims.

For more information and product updates, visit the U`King Store on Amazon.