VHBW CT-1250
VHBW Electric Scooter Charger User Manual
Model: CT-1250
Introduction
Thank you for choosing the VHBW Electric Scooter Charger. This charger is designed to provide a reliable and efficient power supply for compatible electric scooters. Please read this manual thoroughly before use to ensure proper operation and to maximize the lifespan of your charger and scooter battery.
Image: The VHBW Electric Scooter Charger, featuring its main unit, AC power cord, and DC barrel plug output cable.
Safety Information
Your safety is paramount. Please observe the following precautions:
- Use the charger indoors only. Avoid exposure to water, moisture, or high humidity.
- Ensure the charger is compatible with your scooter's voltage and connector type before use. This charger is 42V with a Barrel Round Plug Tip. It is NOT for 24V, 25.2V, 29.4V, 48V, or 54.6V versions, and NOT for 3-Prong connectors.
- Do not attempt to disassemble, modify, or repair the charger. Refer to qualified personnel for service.
- Keep the charger away from heat sources, direct sunlight, and flammable materials.
- Unplug the charger from the power outlet when not in use or during electrical storms.
- The VHBW Power Adapter Charger is ETL, CE, FCC, and RoHS Certified for safety. It provides Over Voltage Protection, Over Current Protection, and Short-circuit Protection.
Image: Graphic detailing the charger's certifications (ETL, FCC) and internal features like IC control and multiple protection circuits.
Image: Visual representation of the charger's six protection features: Over-Temperature, Overcurrent, Short-Circuit, Overcharge, Overload, and Overvoltage Protection.
Compatibility
This VHBW charger is specifically designed as a replacement power supply for the following electric scooter models:
- Gyroor Electric Scooter X8
- Gyroor Electric Scooter H40
- Gyroor Electric Scooter H30 Pro
- Gyroor Electric Scooter H30 MAX Kids Scooter
- Turboant V8 V 8 Dual-Battery Electric Scooter
Important Compatibility Notes:
- This charger features a Barrel Round Plug Tip. It is NOT compatible with 3-Prong connectors.
- This charger outputs 42V. It is NOT for 24V, 25.2V, 29.4V, 48V, or 54.6V versions of scooters.
- Always verify the voltage and connector type of your scooter before purchasing a replacement charger.
Image: Visual guide indicating compatibility with Gyroor X8, H30, and H40 electric scooter models.
Setup
Follow these steps to set up and begin charging your electric scooter:
- Ensure your electric scooter is turned off before connecting the charger.
- Locate the charging port on your electric scooter.
- Connect the barrel plug tip of the VHBW charger securely into the scooter's charging port.
- Plug the AC power cord of the charger into a standard wall outlet (AC 100-240V 50/60Hz).
- The LED indicator on the charger will illuminate to show the charging status.
Image: A white electric scooter connected to the VHBW charger, demonstrating the charging setup.
Image: An electric scooter being charged, with the VHBW charger plugged into a power strip for illustration.
Operating Instructions
The VHBW charger features an LED indicator to provide clear status updates:
- RED Light: Indicates that charging is in progress. The battery is actively receiving power.
- GREEN Light: Indicates that the battery is fully charged or the charger is disconnected from the scooter. Once the light turns green, you can safely disconnect the charger.
It is recommended to disconnect the charger once the battery is fully charged to prolong battery life.
Image: Diagram illustrating the meaning of the LED indicator lights: Red for charging, Green for full charge.
Maintenance
Proper maintenance will help extend the life of your VHBW charger:
- Keep the charger clean and free from dust and debris. Use a soft, dry cloth for cleaning.
- Store the charger in a cool, dry place when not in use.
- Avoid bending or crimping the cables excessively. The charger cable is designed for superior durability with a 30,000 bend lifespan.
- Do not expose the charger to extreme temperatures or direct sunlight for prolonged periods.
- Always handle the charger by the plug, not the cord, when disconnecting from the outlet or scooter.
Image: Close-up view of the charger's features, emphasizing its superior durability, safety-standard input socket, and special heat-resistant materials for the power interface.
Troubleshooting
If you encounter issues with your VHBW charger, please refer to the table below:
| Issue | Possible Cause | Solution |
|---|---|---|
| Charger LED not lighting up / Scooter not charging. | No power from outlet; Loose connection; Incompatible scooter; Faulty charger. | Check wall outlet with another device. Ensure all connections (charger to scooter, charger to wall) are secure. Verify scooter compatibility (voltage and plug type). If issues persist, contact customer support. |
| Charger gets excessively hot. | Poor ventilation; Overload; Internal fault. | Ensure charger is in a well-ventilated area. Do not cover the charger during use. Discontinue use if overheating occurs and contact customer support. |
| Charging is slow. | Battery condition; Charger output lower than expected. | Ensure the charger is rated for 2A output. Battery degradation can affect charging speed. |
Specifications
Detailed technical specifications for the VHBW Electric Scooter Charger:
| Feature | Detail |
|---|---|
| Model Number | CT-1250 |
| Input Voltage | AC 100–240V, 50/60Hz |
| Output Voltage | 42V |
| Output Current | 2A (compatible with 1.5A, 1A, 0.5A) |
| Wattage | 84 watts |
| Cable Length | 10FT / 3M |
| Connector Type | Barrel Round Plug |
| Product Dimensions | 3 x 2 x 1.19 inches |
| Item Weight | 3 ounces |
| Color | Black |
| Special Feature | Lightweight Design |
| Mounting Type | Wall Mount |
Image: Visual representation of the charger's compact dimensions: 4.3 inches in length, 1.8 inches in width, and 1.2 inches in height.
Warranty and Customer Support
VHBW is committed to providing high-quality products and excellent customer service.
- Warranty: We offer a 45-day disclaimer refund and a 15-month worry-free exchange policy.
- Customer Service: Enjoy lifetime friendly customer service.
- Contact Us: If you require any assistance with your Electric Scooter Charger, please do not hesitate to contact us via your Order ID. We are here to help.
Ask a question about this manual
Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.