Games Workshop Warhammer 40,000 T'au Empire Commander Farsight Instruction Manual

Introduction

This instruction manual provides essential guidance for the assembly, painting, and care of your Games Workshop Warhammer 40,000 T'au Empire Commander Farsight miniature model kit. Please read all instructions carefully before beginning assembly to ensure a successful and enjoyable experience.

Safety Information

This product is rated for ages 14 and up. It contains small parts that may pose a choking hazard. Keep out of reach of young children. Exercise caution when using hobby tools such as plastic clippers and hobby knives.

Package Contents

Your Games Workshop T'au Empire Commander Farsight kit typically includes:

• Plastic components for one Commander Farsight miniature.
• One Citadel 60mm Round Base.
• Assembly instructions sheet.

Please verify all components are present and undamaged upon opening the package.

Image: The product box for Commander Farsight, displaying the fully assembled and painted miniature on a scenic base.

Setup and Assembly

Assembling your Commander Farsight miniature requires precision and appropriate tools. Follow these general steps:

Tools Required:

• Plastic clippers or sprue cutters
• Hobby knife or mold line remover
• Plastic glue (e.g., Citadel Plastic Glue)
• Optional: Fine-grit sandpaper or files

Assembly Steps:

1. Preparation: Carefully remove all plastic components from the sprue using plastic clippers. Use a hobby knife or mold line remover to clean any mold lines or excess plastic from the parts.
2. Dry Fit: Before applying glue, dry fit the components together to understand how they connect. This helps prevent errors during permanent assembly.
3. Gluing: Apply a small amount of plastic glue to the joining surfaces. Hold the parts firmly together for a few seconds until the glue sets. Work in sub-assemblies (e.g., legs, torso, arms) before combining them.
4. Base Attachment: Once the miniature is fully assembled, attach it securely to the provided Citadel 60mm Round Base. Ensure the miniature is stable.
5. Posing: Commander Farsight's model allows for some dynamic posing. Refer to the box art or included diagrams for suggested poses, or customize to your preference.

Allow sufficient time for all glue to fully cure before proceeding to painting.

Painting and Finishing

Once assembled, your Commander Farsight miniature is ready for painting. This process allows you to personalize your model and bring it to life.

Painting Steps:

1. Washing: Gently wash the assembled model with mild soap and water to remove any residual mold release agents. Allow it to dry completely.
2. Priming: Apply a thin, even coat of primer (e.g., Citadel Colour Spray Primer) to the entire model. This provides a consistent surface for paint adhesion. Allow to dry.
3. Base Coats: Apply your chosen base colors to the various sections of the model. Commander Farsight is typically depicted in red armor with white and black accents. Apply thin coats to maintain detail.
4. Shading: Use washes or shades (e.g., Citadel Shade paints) to add depth and definition to the model's recesses.
5. Layering and Highlighting: Apply lighter colors to raised areas to create highlights and further define details.
6. Detailing: Paint smaller details such as lenses, weapon components, and insignia.
7. Basing: Decorate the miniature's base with textures, flock, or other scenic elements to complement the model.
8. Varnishing (Optional): Apply a clear varnish to protect your painted model from wear and tear.

Image: Another view of the Commander Farsight product packaging, providing additional visual reference for the miniature.

Maintenance and Care

Proper care will preserve the appearance and integrity of your Commander Farsight miniature for years to come.

• Cleaning: Dust your miniature regularly with a soft brush or a gentle air blower. Avoid harsh chemicals or abrasive materials.
• Handling: Handle the miniature by its base whenever possible to avoid damaging painted surfaces or delicate parts.
• Storage: Store your miniature in a cool, dry place away from direct sunlight and extreme temperatures. Consider using a display case or a foam-lined carrying case for protection.
• Transport: When transporting, ensure the miniature is securely packed to prevent movement and potential damage.

Troubleshooting

Here are solutions to common issues you might encounter:

• Parts not fitting: Ensure all mold lines are removed. Dry fit again. If necessary, gently file or sand the joining surfaces for a better fit.
• Glue not holding: Ensure you are using plastic glue for plastic components. Apply sufficient pressure and allow adequate curing time. Avoid touching the glued area until fully set.
• Paint chipping: This can be prevented by proper priming and, optionally, applying a protective varnish after painting. For existing chips, carefully touch up with matching paint.
• Bent parts: For minor bends in plastic, carefully apply gentle heat (e.g., from a hairdryer on a low setting) and reshape the part. Be extremely cautious to avoid melting the plastic.

Specifications

Warranty and Support

For information regarding product warranty, missing parts, or further support, please contact Games Workshop directly through their official website. Keep your proof of purchase for any warranty claims.

Official Games Workshop Website: www.games-workshop.com