Product Overview
Introduction
This manual provides essential information for the proper installation, maintenance, and care of your KAFTKO HEPA filter. Designed for optimal air filtration, this filter helps maintain the performance of your compatible handheld vacuum cleaner by capturing fine dust particles and allergens.
Compatibility
The KAFTKO HEPA filter is specifically designed for use with the Xiaomi SSXCQ01XY Handheld Vacuum Cleaner. Please verify your vacuum cleaner model number to ensure proper fit and function.
Package Contents
- 4 x KAFTKO HEPA Cartridge Filters
Image: Four KAFTKO HEPA filters, illustrating the typical package quantity.
Installation
Follow these steps to correctly install the HEPA filter into your Xiaomi SSXCQ01XY handheld vacuum cleaner.
- Ensure the vacuum cleaner is powered off and unplugged from any charging source.
- Locate the dust cup release button or latch on your vacuum cleaner and remove the dust cup.
- Carefully remove the old filter assembly from the dust cup. This may involve twisting or pulling.
- Insert the new KAFTKO HEPA filter into the designated slot within the dust cup. Ensure it is seated firmly and correctly aligned.
- Reattach the dust cup to the vacuum cleaner, ensuring it clicks securely into place.
Image: An exploded view demonstrating the placement of the HEPA filter within the Xiaomi handheld vacuum cleaner.
Maintenance
Cleaning
The KAFTKO HEPA filter is reusable. To maintain optimal performance, it is recommended to clean the filter regularly. Gently tap the filter against a hard surface to dislodge accumulated dust. For a more thorough cleaning, rinse the filter under cool running water. Ensure the filter is completely dry before reinstallation to prevent damage to the vacuum cleaner.
Replacement
For peak machine performance and effective filtration, it is best to replace the HEPA filter every 2 to 3 months, depending on usage frequency and environment. Regular replacement ensures consistent suction power and air quality.
Image: A close-up view of the HEPA filter's pleated material and structural components, highlighting its design for effective filtration.
Specifications
| Feature | Detail |
|---|---|
| Brand | KAFTKO |
| Compatible Model | Xiaomi SSXCQ01XY Handheld Vacuum Cleaner |
| Material | Plastic |
| Reusability | Reusable |
| Number of Pieces | 4 |
| Item Weight (per filter) | Approximately 0.035 ounces (1 gram) |
Image: A diagram showing the key dimensions of the HEPA filter, including its height, top diameter, and base diameter.
Troubleshooting
If you experience issues after installing the new filter, consider the following:
- Reduced Suction: Ensure the filter is correctly seated and not clogged. Clean or replace the filter if necessary.
- Filter Not Fitting: Double-check that your vacuum cleaner model is indeed the Xiaomi SSXCQ01XY. This filter is not compatible with other models.
- Unusual Noises: Verify the filter is installed securely and not loose within the dust cup.
Customer Support
If you have any questions or require further assistance regarding your KAFTKO HEPA filter, please contact our customer service. We aim to respond to inquiries within 24 hours.