Matalde Rocking Chair with Cushion Bamboo-1230 User Manual

1. Introduction

Thank you for choosing the Matalde Rocking Chair with Cushion Bamboo-1230. This manual provides essential information for the safe assembly, operation, maintenance, and troubleshooting of your new rocking chair. Please read this manual thoroughly before assembly and retain it for future reference.

Image 1.1: The Matalde Rocking Chair with Cushion Bamboo-1230, featuring a natural bamboo frame and a black cushion.

2. Safety Information

To ensure safe use of your rocking chair, please observe the following precautions:

• Always assemble the chair on a soft, clean surface to prevent damage to components.
• Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten as necessary.
• Do not exceed the maximum weight capacity.
• Keep children and pets away from the assembly area.
• Avoid placing the chair on uneven surfaces to prevent tipping.
• Do not stand on the chair or use it as a step stool.
• Keep the chair away from open flames or extreme heat sources.

3. Package Contents

Before beginning assembly, verify that all parts listed below are present and undamaged. If any parts are missing or damaged, please contact Matalde customer service.

• 1 x Rocking Chair Frame (Bamboo components)
• 1 x Main Cushion (Black, 100% polyester)
• 1 x Extra Cushion (Black, 100% polyester)
• Assembly Hardware (Screws, bolts, Allen wrench, etc.)
• 1 x Assembly Instruction Sheet (This manual)

4. Assembly Instructions

Assembly is required for this product. Please follow these steps carefully. It is recommended to have two people for assembly.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, soft surface to prevent scratches. Identify all components against the package contents list.
2. Attach Side Frames: Connect the horizontal support bars to the pre-drilled holes on the side rocking frames using the provided screws and Allen wrench. Do not fully tighten screws yet.
3. Install Seat and Backrest Slats: Secure the bamboo seat and backrest slats to the assembled frame. Ensure they are properly aligned before proceeding.
4. Attach Armrests: Fasten the armrests to the top of the side frames.
5. Final Tightening: Once all components are loosely assembled, gently rock the chair to ensure it sits evenly. Then, systematically tighten all screws and bolts until secure. Do not overtighten.
6. Place Cushions: Position the main cushion onto the seat and backrest. Use the elastic strap and two sets of ropes to fix the cushion tightly to the chair, preventing it from slipping. Place the extra cushion as desired for additional comfort.

Image 4.1: The assembled rocking chair can be a comfortable addition to various living spaces, both indoors and outdoors.

5. Operating Instructions (Usage)

The Matalde Rocking Chair is designed for relaxation and comfort. It can be used in various settings:

• Indoor Use: Place the rocking chair in your living room, bedroom, or sunroom for a comfortable seating option.
• Outdoor Use: The bamboo material is UV and weather resistant, making it suitable for use on patios, gardens, or balconies.
• Relaxation: Gently rock back and forth for a soothing experience. The included cushion provides enhanced comfort for extended periods of lounging.

Ensure the chair is placed on a stable, level surface before use to prevent accidental tipping.

6. Maintenance and Care

Proper care will extend the life and appearance of your rocking chair:

• Cleaning the Bamboo Frame: Wipe the bamboo frame with a damp cloth and mild soap solution. Dry thoroughly with a clean cloth. Avoid abrasive cleaners or harsh chemicals.
• Cushion Care: The cushion is made of 100% polyester and is treated to be waterproof. For general cleaning, wipe with a damp cloth. For deeper cleaning, hand wash with mild soap and water, then air dry completely. Do not machine wash or tumble dry.
• Weather Protection: While the bamboo is UV and weather resistant, prolonged exposure to extreme weather conditions (heavy rain, snow, direct intense sunlight) may affect its longevity. Consider covering the chair or storing it indoors during harsh weather.
• Fastener Check: Periodically check all screws and bolts to ensure they remain tight. Re-tighten as needed to maintain stability.

7. Troubleshooting

If you encounter any issues with your rocking chair, refer to the following common problems and solutions:

If the problem persists or if you encounter an issue not listed here, please contact Matalde customer service for assistance.

8. Specifications

Detailed specifications for the Matalde Rocking Chair with Cushion Bamboo-1230:

• Model: Bamboo-1230
• Cushion Color: Black
• Material of Chair: Bamboo
• Material of Cushion: Fabric (100% polyester)
• Dimensions of Chair (W x D x H): 25.9" x 33.8" x 41.3" (65.8 cm x 85.9 cm x 104.9 cm)
• Dimensions of Cushion (W x D x H): 47.2" x 19.7" x 1.2" (119.9 cm x 50.0 cm x 3.0 cm)
• Seat Width: 21.6" (54.9 cm)
• Seat Depth: 21" (53.3 cm)
• Seat Height from the Ground: 14.5" (36.8 cm)
• Armrest Height from the Ground: 21.6" (54.9 cm)
• Cushion Features: Waterproof, elastic strap, 2 sets of ropes for securing.
• Assembly Required: Yes

9. Warranty and Support

Matalde is committed to providing high-quality products. While specific warranty details are not included in this manual, please retain your proof of purchase for any warranty claims.

For product support, missing parts, or troubleshooting assistance, please contact Matalde customer service through the retailer where the product was purchased or visit the official Matalde website:

Matalde Customer Service: Visit Matalde Store on Amazon