1. Important Safety Information
Please read all instructions carefully before using the RAXMETRY CBG-W100 Bikini Trimmer. Retain this manual for future reference.
- Water Safety: This trimmer is IPX7 waterproof and suitable for both wet and dry use. It can be used in the shower or bath.
- Blade Care: The ceramic blade is designed for sensitive skin. Handle with care to avoid damage.
- Skin Contact: Use caution when trimming sensitive areas. Do not use on damaged, irritated, or broken skin.
- Charging: Use only the provided USB charging cable. Ensure the device is dry before charging.
- Children: Keep the device and all accessories out of reach of children.
- Disposal: Dispose of the device and its battery responsibly according to local regulations.
2. Product Overview
The RAXMETRY CBG-W100 is a versatile electric trimmer designed for smooth and safe body grooming. It features a special R-design and a ceramic sharp blade to prevent irritation.
Key Features:
- Smooth and Safe Shaving: R-design and ceramic blade for sensitive skin.
- All-in-One Trimmer: Includes 2 wide blades (20mm/32mm) and 3 guard combs for customized trimming.
- USB Rechargeable: Cordless operation with up to 90 minutes of battery life.
- IPX7 Waterproof: Suitable for wet and dry use, with a washable and removable ceramic head.
- Compact and Portable: Lightweight design for home, business, and travel.
- Quiet Operation: High-quality torque motor with noise reduction for a quiet experience.
Package Contents:
- RAXMETRY CBG-W100 Trimmer Unit
- Wide Trimmer Head (pre-installed)
- Cutlass Trimmer Head
- 3 Guard Combs (2mm, 3-6mm, 9-12mm)
- USB Charging Cable
- Cleaning Brush
- User Manual
Figure 2.1: RAXMETRY CBG-W100 Trimmer with all included accessories.
3. Setup
3.1 Charging the Trimmer
- Ensure the trimmer is dry before charging.
- Connect the USB charging cable to the charging port at the bottom of the trimmer.
- Plug the other end of the USB cable into a compatible USB power source (e.g., computer, adapter, power bank, car charger).
- The power indicator light will illuminate during charging. A full charge takes approximately 90 minutes.
Figure 3.1: Connecting the USB charging cable to the trimmer.
3.2 Attaching/Changing Trimmer Heads and Guard Combs
- To remove a trimmer head, gently push it upwards until it detaches from the main unit.
- To attach a new trimmer head, align it with the main unit and push it down until it clicks into place.
- To attach a guard comb, slide it onto the desired trimmer head until it securely snaps into position.
- Select the appropriate guard comb (2mm, 3-6mm, or 9-12mm) based on your desired hair length.
Figure 3.2: Trimmer heads and guard combs for different trimming lengths.
4. Operating Instructions
4.1 General Usage
- Press the power button to turn on the trimmer.
- For optimal results, stretch your skin taut with your free hand.
- Gently press the trimmer against the skin and move it slowly and steadily against the direction of hair growth.
- The trimmer can be used for both wet and dry shaving.
Figure 4.1: The R-angle design of the ceramic blade for safe trimming.
4.2 Recommended Areas of Use
The RAXMETRY CBG-W100 is designed for full body care, including:
- Armpits
- Legs
- Bikini Area
- Arms
- Face (with appropriate head/comb)
- Chest, Groin, Back Hair
Figure 4.2: Trimming leg hair with the device.
Figure 4.3: Trimming the bikini area.
Figure 4.4: Using the trimmer for facial hair.
5. Maintenance
5.1 Cleaning the Trimmer
- Turn off the trimmer before cleaning.
- Remove the trimmer head by gently pushing it upwards.
- Rinse the detachable ceramic head under lukewarm running water.
- Use the provided cleaning brush to remove any trapped hairs from the blade and inside the trimmer head.
- Important: Do not flush the inner body (motor) with water. Use the brush to clean the main unit if necessary.
- Allow all parts to air dry completely before reattaching the head or storing the device.
Figure 5.1: Rinsing the detachable trimmer head for cleaning.
6. Troubleshooting
If you encounter any issues with your RAXMETRY CBG-W100 Trimmer, please refer to the following common solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Trimmer does not turn on. | Battery is low or depleted. | Charge the trimmer fully (approx. 90 minutes). |
| Trimmer is not cutting effectively. | Blade is clogged with hair. | Clean the trimmer head and blade thoroughly using the brush and water. |
| Trimmer pulls hair or causes irritation. | Incorrect usage angle or dull blade. | Ensure the trimmer is held flat against the skin and moved slowly against hair growth. If the blade is dull, consider replacing the head. |
| Device stops working during wet use. | Water ingress into the main unit. | Ensure the trimmer head is properly attached and sealed before wet use. If water has entered, discontinue use and contact support. |
7. Specifications
| Feature | Detail |
|---|---|
| Model Name | CBG-W100 |
| Product Dimensions | 6.14 x 1.46 x 1.06 inches |
| Item Weight | 7.05 ounces (200 Grams) |
| Power Source | Battery Powered (Rechargeable via USB) |
| Battery Type | 1 Lithium Polymer battery (included) |
| Battery Capacity | 600mAh (approx. 90 minutes running time) |
| Blade Material | Ceramic + Stainless Steel |
| Waterproof Rating | IPX7 (Wet & Dry Use) |
| Included Components | Trimmer, 2 Trimmer Heads, 3 Guard Combs, USB Cable, Cleaning Brush |
| Color | Green |
8. Warranty and Support
RAXMETRY products are manufactured with quality and durability in mind. This product includes a manufacturer's warranty. For specific warranty details, please refer to the documentation included in your product packaging or visit the official RAXMETRY website.
If you require assistance, have questions, or need to claim warranty service, please contact RAXMETRY customer support through the retailer where you purchased the product or via the contact information provided on the official RAXMETRY brand store.
Online Support: Visit the RAXMETRY Store on Amazon