KEDIERS C710 PC Case User Manual

1. Introduction

Thank you for choosing the KEDIERS C710 ATX Mid-Tower PC Gaming Case. This manual provides detailed instructions for setting up, operating, and maintaining your new PC case. The C710 is designed for optimal performance and aesthetics, featuring pre-installed PWM ARGB fans, a tempered glass side panel, and a robust mesh design for superior airflow.

Key Features:

• 7 Pre-installed PWM ARGB Fans for efficient cooling and customizable lighting.
• Hinged Tempered Glass Side Panel for easy access and enhanced visual appeal.
• Mesh Front Panel for optimized airflow.
• Spacious E-ATX Mid-Tower design supporting various motherboard sizes and extensive component compatibility.
• Integrated Dust Filters (top, bottom, front) for system cleanliness.
• Multi-functional I/O Panel with USB 2.0, USB 3.0, and HD Audio ports.

Please read this manual thoroughly before installation and use to ensure proper functionality and longevity of your product.

2. Package Contents

Verify that all items listed below are present in your package:

• 1 x KEDIERS C710 Computer Case
• 7 x PWM ARGB Fans (pre-installed)
• 1 x User Manual (this document)
• 1 x Screw Accessory Kit (includes various screws for component installation)
• 1 x Additional PWM Motherboard Fan Hub (for motherboards lacking sufficient 5V 3-pin fan headers)

Image: The KEDIERS C710 PC Case with its tempered glass side panel open, revealing the interior and the vibrant blue glow of the pre-installed ARGB fans.

3. Setup and Installation

Follow these steps for proper assembly and installation of your PC components into the KEDIERS C710 case.

3.1 Preparing the Case

1. Unpack the Case: Carefully remove the case from its packaging. Inspect for any shipping damage.
2. Access the Interior: The tempered glass side panel is hinged. Gently open it to access the interior of the case. The opposite side panel can be removed by unscrewing the thumbscrews at the rear.
3. Remove Accessories: Locate the accessory box inside the case, which contains screws and the additional PWM fan hub.

Image: The KEDIERS C710 PC Case with its tempered glass side panel closed, highlighting the mesh front panel and the illuminated ARGB fans.

3.2 Motherboard Installation

The C710 supports E-ATX, ATX, Micro-ATX, and Mini-ITX motherboards.

1. Install Standoffs: Ensure the correct standoffs are installed for your motherboard size. The case typically comes with standoffs pre-installed for ATX. Adjust as needed using the provided tools.
2. Install I/O Shield: If your motherboard requires an I/O shield, install it into the rear opening of the case before mounting the motherboard.
3. Mount Motherboard: Carefully place your motherboard onto the standoffs, aligning the screw holes. Secure it with the appropriate screws from the accessory kit.

Image: An internal diagram of the KEDIERS C710 PC Case illustrating the compatible motherboard sizes (ITX, M-ATX, ATX, E-ATX) and various mounting locations for fans and radiators.

3.3 Storage Drive Installation

The case supports up to 2 HDDs and 3 SSDs.

• 2.5" SSDs: Mount SSDs to the dedicated brackets located on the rear of the motherboard tray or in the drive cage.
• 3.5" HDDs: Install HDDs into the drive cage located at the bottom front of the case.

Image: An internal view of the KEDIERS C710 PC Case, clearly showing the designated mounting points for SSDs and HDDs, positioned near the front ARGB fans.

3.4 Power Supply Unit (PSU) Installation

Install your ATX power supply into the dedicated compartment at the bottom rear of the case. Secure it with screws from the outside rear of the case.

3.5 Graphics Card and Expansion Cards

Remove the necessary PCIe slot covers at the rear of the case. Insert your graphics card or other expansion cards into the motherboard's PCIe slots and secure them with screws.

3.6 Cable Management

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables. This improves airflow and aesthetics. The case provides ample space for efficient cable management.

3.7 Connecting Front I/O and Fans

Connect the front panel cables (USB 2.0, USB 3.0, HD Audio, Power, Reset, LED) to the corresponding headers on your motherboard. The pre-installed ARGB fans are connected to a fan hub. Connect the fan hub's PWM and ARGB cables to your motherboard or the provided additional PWM fan hub for control.

• USB 2.0: 2 ports
• USB 3.0: 1 port
• HD Audio: 1 port
• Power Button
• Reset Button
• LED Control Button

4. Operating Instructions

Once all components are installed and connected, you can power on your system.

4.1 Powering On

Press the power button on the top I/O panel to start your computer.

4.2 ARGB Fan Control

The 7 pre-installed PWM ARGB fans offer customizable lighting and speed control:

• Lighting Control: Use the dedicated LED control button on the I/O panel to cycle through various ARGB lighting modes and colors. For advanced customization, connect the ARGB hub to your motherboard's 5V 3-pin ARGB header and use compatible motherboard software (e.g., ASUS Aura Sync, MSI Mystic Light, Gigabyte RGB Fusion, ASRock Polychrome Sync).
• Fan Speed Control: The fans are PWM (Pulse Width Modulation) enabled, allowing their speed to be automatically adjusted by your motherboard based on system temperature. Ensure the PWM cable from the fan hub is connected to a motherboard fan header.

Image: The KEDIERS C710 PC Case with a fully assembled system, featuring a graphics card and CPU cooler, all illuminated by the dynamic green and blue ARGB fan lighting.

5. Maintenance

Regular maintenance ensures optimal performance and extends the lifespan of your PC components.

• Dust Filter Cleaning: The C710 features three magnetic dust filters (top, bottom, and front). Regularly remove and clean these filters with compressed air or water (ensure they are completely dry before reinstallation) to prevent dust buildup and maintain optimal airflow.
• Interior Cleaning: Periodically open the side panel and use compressed air to remove dust from internal components, especially heatsinks and fan blades.
• Cable Management Check: Ensure cables remain neatly routed and do not obstruct airflow.

6. Troubleshooting

This section addresses common issues you might encounter.

• Fans Not Lighting Up:
  • Ensure the ARGB cables from the fan hub are correctly connected to a 5V 3-pin ARGB header on your motherboard or the dedicated LED control button.
  • Verify power supply to the fan hub.
  • Check motherboard software settings for ARGB control.
• Fans Not Spinning:
  • Confirm the PWM cable from the fan hub is securely connected to a motherboard fan header.
  • Check BIOS/UEFI settings for fan speed control.
  • Ensure the power supply is providing adequate power.
• Front USB Ports Not Working:
  • Verify that the USB 2.0 and USB 3.0 cables from the front I/O panel are correctly connected to the corresponding headers on your motherboard.
  • Check motherboard drivers.
• No Power:
  • Ensure the power supply is switched on at the back.
  • Check all power connections to the motherboard and components.
  • Verify the front panel power button cable is correctly connected to the motherboard.

7. Specifications

8. Warranty and Support

KEDIERS is committed to providing excellent customer support. Should you encounter any issues with your C710 PC case, please do not hesitate to contact us.

• Contact Support: For assistance, please refer to the seller's contact information on the product purchase page (e.g., click "Sold by KEDIERS" on Amazon).
• Warranty Information: Specific warranty terms and duration may vary by region and retailer. Please retain your proof of purchase for warranty claims.