TOCHIC BPL001-Black
TOCHIC 45-inch Rustic Pool Table Light Fixture Instruction Manual
Model: BPL001-Black
Introduction
This manual provides detailed instructions for the safe installation, operation, and maintenance of your TOCHIC 45-inch Rustic Pool Table Light Fixture. Please read all instructions carefully before beginning installation and retain this manual for future reference.
Safety Information
- WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Contact a qualified electrician if you are unfamiliar with proper electrical wiring.
- Use only E26 base bulbs, maximum 60 watts per bulb. Do not exceed the recommended wattage.
- Ensure the fixture is securely mounted to a structurally sound ceiling or junction box capable of supporting the fixture's weight.
- Do not install this fixture in wet or damp locations. It is designed for indoor use only.
- Handle glass components with care to prevent breakage.
Package Contents
Verify that all parts are included before beginning installation. If any parts are missing or damaged, contact TOCHIC customer service.
- Light Fixture Body (with pre-attached chain)
- Lamp Shades (3 units)
- Mounting Hardware (Canopy, Mounting Plate, Screws, Wire Nuts)
- Instruction Manual
Note: E26 bulbs are not included and must be purchased separately.
Specifications
| Feature | Detail |
|---|---|
| Model Name | BPL001-Black |
| Dimensions (L x W x H) | 45.08" x 12.2" x 26.69" |
| Item Weight | 19.75 pounds |
| Material | Metal, Plastic (Acrylic Shade) |
| Color | Black |
| Number of Lights | 3 |
| Bulb Base | E26 |
| Max Wattage per Bulb | 60 Watts |
| Voltage | 110 Volts |
| Installation Type | Semi Flush Mount (Monopoint with Canopy) |
| Room Type | Dining Room, Game Room, Kitchen, Billiard Room |
The fixture features a rustic design with wildlife silhouettes (bear, elk, trees) on both the main body and the lamp shades. It is suitable for 7' or 8' pool tables and offers adjustable hanging chain length.
Figure 1: Product Dimensions Overview
Setup and Installation
Tools Required (Not Included): Screwdriver, Wire Strippers, Pliers, Electrical Tape, Ladder, Safety Glasses.
- Turn Off Power: Before starting, ensure the power to the circuit you are working on is turned off at the main electrical panel (circuit breaker or fuse box).
- Prepare Mounting Location: If replacing an existing fixture, carefully remove it. Ensure the junction box is securely mounted and capable of supporting the new fixture's weight.
- Attach Mounting Plate: Secure the mounting plate (included in hardware) to the junction box using the provided screws.
- Assemble Lamp Shades: The lamp shades are packed disassembled for safety. Carefully align the panels and secure them using the small screws provided. Do not overtighten until all panels are in place to allow for minor adjustments.
- Connect Wiring: With the help of another person to hold the fixture, connect the electrical wires:
- Connect the black wire from the fixture to the black (hot) wire from the junction box using a wire nut.
- Connect the white wire from the fixture to the white (neutral) wire from the junction box using a wire nut.
- Connect the ground wire (bare copper or green) from the fixture to the ground wire from the junction box and the ground screw on the mounting plate.
- Mount Fixture: Carefully lift the fixture and attach the canopy to the mounting plate, securing it with the provided screws or nuts. Adjust the chain length as desired before final tightening. The fixture comes with a 43.31-inch hanging chain, which is height adjustable.
- Install Bulbs: Screw three E26 base bulbs (not included) into the sockets. Do not exceed 60 watts per bulb.
- Restore Power: Turn the power back on at the circuit breaker.
Figure 2: Detail of Lamp Shade Design
Figure 3: Fixture Connection Point Detail
Operating Instructions
Once installed and bulbs are in place, operate the light fixture using your standard wall switch. The fixture is designed for simple on/off functionality. It supports various E26 bulb types including LED, CFL, halogen, incandescent, and fluorescent, allowing you to choose the desired light color and brightness (warm white is a common choice).
Video 1: Demonstration of the TOCHIC Pool Table Light Fixture in various settings, showcasing its design and illumination.
Maintenance
- Cleaning: To clean the fixture, ensure the power is off. Wipe with a soft, dry cloth. Do not use abrasive cleaners or solvents, as they may damage the finish or acrylic shades.
- Bulb Replacement: Always turn off the power before replacing bulbs. Allow bulbs to cool completely before touching. Unscrew the old bulb and screw in a new E26 base bulb (max 60W).
- Inspection: Periodically check all connections and mounting hardware to ensure they remain secure.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on | No power to the fixture Loose wiring connection Faulty bulb | Check circuit breaker/fuse. Ensure wall switch is on. Turn off power, check all wire connections. Replace bulb with a new one. |
| Flickering light | Loose bulb Loose wiring connection Incompatible dimmer switch (if applicable) | Tighten bulb securely. Turn off power, check all wire connections. Ensure dimmer switch is compatible with LED/CFL bulbs if used. |
| Fixture is unstable/wobbly | Mounting hardware not secure | Turn off power, tighten all mounting screws and nuts. Ensure junction box is secure. |
Warranty and Support
This TOCHIC light fixture comes with a Limited Warranty. For specific warranty details, claims, or technical support, please refer to the warranty card included with your product or contact TOCHIC customer service directly.
Customer Service: For assistance, please visit the TOCHIC store on Amazon or refer to the contact information provided in your product packaging.
Product Overview
