LOFTER C180
LOFTER-pro LED Motion Sensor Light Instruction Manual
Model: C180
Introduction
Thank you for choosing the LOFTER-pro LED Motion Sensor Light. This product is designed to provide convenient and efficient lighting for various indoor spaces such as kitchens, wardrobes, closets, cupboards, and stairs. Featuring a motion sensor, adjustable brightness, and a rechargeable battery, it offers a practical lighting solution without the need for constant manual operation.
LOFTER-pro LED Motion Sensor Light in a kitchen setting.
Key Features
- 10 LEDs Motion Sensor Light: Provides 95 lumens of gentle, non-dazzling light.
- 5 Adjustable Brightness Options: Brightness levels from 20% to 100% (default 80%).
- Reliable Infrared Sensor: Automatically turns on when human motion is detected within 10 feet in dark environments, turns off after 24 seconds of no motion.
- USB-C Rechargeable Battery: Built-in 250 mAh battery, offering 1-2 months of use in motion sensor mode per charge.
- Easy Installation: Features built-in magnets for iron surfaces and includes adhesive tapes with magnetic sheets for non-iron surfaces.
Visual representation of the light's key features.
Package Contents
The LOFTER-pro LED Motion Sensor Light package includes the following items:
- LOFTER-pro LED Motion Sensor Lights (3 units)
- USB Charging Cable (1 unit)
- 3M Adhesive Metal Strips (3 units)
All items included in the LOFTER-pro LED Motion Sensor Light package.
Setup
Installation
The LOFTER-pro LED Motion Sensor Light offers two convenient installation methods:
- For Iron Surfaces: The light has a built-in magnet. Simply attach it directly to any iron surface.
- For Non-Iron Surfaces: Use the provided 3M adhesive metal strips. Peel off the backing from one side of the adhesive strip and attach it to the desired clean, non-iron surface. Then, the magnetic base of the light will adhere to the metal strip. This allows for easy removal of the light for charging.
Illustration of magnetic and adhesive installation options.
Close-up of the magnetic base and 3M adhesive strip.
Operating Instructions
Power On/Off & Mode Selection
The light features a simple push-button switch for control.
- To Turn On/Off: Press and hold the switch button.
- Sensor Mode: In sensor mode, the light will automatically turn on when human motion is detected within 10 feet in a dark environment. It will automatically turn off after 24 seconds if no motion is detected.
Adjusting Brightness
The light offers 5 adjustable brightness options:
- While the light is on, short press the switch button to cycle through brightness levels (20%-40%-60%-80%-100%).
- The default brightness when turned on is 80%.
Visual guide to adjusting brightness levels.
Example of adjustable brightness in a kitchen environment.
Motion Sensor Functionality
The integrated sensor ball detects motion and ambient light conditions.
- The light will only activate in dark environments when motion is detected.
- The sensor is adjustable; you can orient the light to face the area where motion is expected to expand or narrow the sensing range.
Auto-induction condition: light activates in darkness with motion.
Adjusting the sensor direction for optimal motion detection.
Versatile applications of the motion sensor LED light bar.
Charging
The LOFTER-pro LED Motion Sensor Light is equipped with a built-in rechargeable battery.
- Connect the provided USB-C charging cable to the light's charging port.
- A red light indicates that the unit is currently charging.
- A green light indicates that the unit is fully charged.
- A full charge typically takes about 1 hour.
- The charge can last up to 1-2 months in motion sensor mode, depending on usage frequency.
Charging indicator lights: Red for charging, Green for fully charged.
Maintenance
- Cleaning: Wipe the light's surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents.
- Battery Care: To prolong battery life, avoid completely draining the battery frequently. Recharge the unit when the red indicator light appears.
- Storage: If storing the light for an extended period, ensure it is fully charged and store in a cool, dry place.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Light does not turn on. | Insufficient charge; Not in a dark environment; No motion detected. | Charge the light fully. Ensure the environment is dark enough for sensor activation. Check if motion is within the 10-foot sensing range. |
| Light does not hold charge for long. | Frequent activation in high-traffic areas; Battery degradation over time. | Reduce frequency of activation if possible. Consider replacing the unit if battery life significantly diminishes after prolonged use. |
| Light does not turn off automatically. | Sensor malfunction; Continuous motion detected. | Ensure no continuous motion is present in the sensing area. If the issue persists, the sensor may be faulty. |
| Brightness is too low/high. | Incorrect brightness setting. | Short press the switch button to cycle through the 5 adjustable brightness levels until desired level is reached. |
Specifications
| Feature | Detail |
|---|---|
| Brand | LOFTER |
| Model Name | C180 |
| Light Source Type | LED |
| Number of LEDs | 10 per light |
| Brightness | 95 Lumens |
| Light Color | Warm White |
| Power Source | Battery Powered |
| Battery Capacity | 250 mAh (rechargeable Lithium Polymer) |
| Charging Interface | USB-C |
| Motion Sensor Range | Up to 10 feet |
| Auto-off Time | 24 seconds (after no motion detected) |
| Material | Aluminum, Iron |
| Product Dimensions | 7.08"L x 0.8"W x 0.67"H |
| Item Weight | 1.76 Ounces |
| Installation Type | Magnetic / Adhesive |
| Water Resistance Level | Not Water Resistant |
Warranty & Support
For any product inquiries, technical support, or warranty claims, please contact LOFTER customer service through the retailer's platform or the official LOFTER website. Please retain your proof of purchase for warranty validation.