Yamazaki Tower Adjustable Lantern Stand, White, Model 4514 - Instruction Manual

Introduction

Thank you for purchasing the Yamazaki Tower Adjustable Lantern Stand, Model 4514. This stand is designed to enhance your indoor or outdoor spaces with its simple, versatile design and adjustable height feature. Please read this manual carefully before assembly and use to ensure proper installation and safe operation. Keep this manual for future reference.

Product Features

• Adjustable Height: The stand's height can be freely adjusted from approximately 80 cm to 152 cm, allowing for flexible placement and use with various items.
• Compact Design: With a base measuring approximately W26cm x D30cm, the stand occupies minimal floor space.
• Versatile Use: Ideal for hanging lanterns, small plant pots, wind chimes, or other decorative items in balconies, gardens, or indoor settings.
• Durable Construction: Made from steel with a powder-coated finish for stability and longevity.

Package Contents

Please verify that all parts are present before beginning assembly.

• Main Stand Body (Steel, powder-coated)
• Base Plate (Steel, powder-coated)
• Adjustable Pole Section
• Hook Attachment
• Cap (Polypropylene)
• Hex Wrench x 1
• Assembly Screws/Fasteners

Setup Instructions

Assembly is required for this product. Please follow these steps carefully.

1. Unpack Components: Carefully remove all parts from the packaging and lay them out on a clean, flat surface. Check against the "Package Contents" list.
2. Attach Main Pole to Base: Secure the main stand body to the base plate using the provided screws and hex wrench. Ensure the connection is tight and stable.
3. Insert Adjustable Pole: Insert the adjustable pole section into the top of the main stand body.
4. Attach Hook: Place the hook attachment onto the top of the adjustable pole.
5. Secure Cap: Place the polypropylene cap on the very top of the pole.
6. Adjust Height: Loosen the adjustment knob on the pole, extend or retract the pole to your desired height (between 80cm and 152cm), and then tighten the knob securely to lock the height.

Image: Assembled lantern stand on a patio.

Image: Lantern stand used indoors next to a desk.

Image: Stand holding a hanging plant pot.

Image: Stand holding a small speaker.

Image: Height adjustment demonstration.

Image: Close-up of the height adjustment knob.

Image: Close-up of the hook attachment.

Operating Instructions

The Yamazaki Tower Adjustable Lantern Stand is designed for simple operation.

1. Placement: Position the stand on a flat, stable surface. Ensure the base is fully supported to prevent tipping.
2. Hanging Items: Hang your desired item (lantern, plant pot, etc.) onto the hook. Ensure the item's weight does not exceed the maximum load capacity of 2 kg.
3. Height Adjustment: To adjust the height, loosen the adjustment knob located on the pole. Carefully slide the upper pole section to the desired height. Once adjusted, firmly tighten the knob to secure the pole in place.

Maintenance

Regular maintenance will help prolong the life of your lantern stand.

• Cleaning: Wipe the stand with a soft, damp cloth. Avoid abrasive cleaners or solvents that may damage the powder-coated finish.
• Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary using the hex wrench.
• Outdoor Use: While the stand is designed for outdoor use, prolonged exposure to rain or water may cause discoloration or rust. It is recommended to avoid using it outdoors during strong winds or heavy rain.

Troubleshooting

Specifications

Image: Product dimensions diagram.

Safety Information

• Do not exceed the maximum load capacity of 2 kg to prevent tipping or damage.
• Ensure the stand is placed on a stable, level surface to prevent accidental falls.
• When using indoors, avoid placing oil, gas, or gasoline lanterns that use open flames near flammable materials or in areas accessible to small children or pets.
• Avoid using the stand in areas without a roof outdoors (e.g., balconies, terraces) during strong winds or rain, as this may cause discoloration or rust.
• Keep hands clear of moving parts during height adjustment to prevent pinching.

Warranty and Support

For warranty information or customer support, please refer to the contact details provided with your purchase receipt or visit the official Yamazaki website. Please have your model number (4514) and purchase date available when contacting support.