1. Important Safety Information
WARNING: TIPPING HAZARD! Unanchored furniture can tip over. To prevent this furniture from tipping, it must be securely anchored to the wall. Appropriate fastening accessories suitable for your home's walls should be used. If you have any questions, please consult your local specialized retailer. Please follow each step of the instructions carefully.
Keep these instructions for future reference. Read them carefully before assembly and use.
2. Product Overview
The Vicco Eliza Nightstand is a modern bedside table designed for bedrooms and children's rooms. It features two drawers, offering practical storage. Its dimensions are 66 cm (width) x 36 cm (depth) x 60 cm (height). The nightstand is constructed from 16 mm particle board with a melamine resin coating.
Figure 2.1: The Vicco Eliza Nightstand (Grey) in a bedroom environment, showcasing its modern design and two drawers.
Figure 2.2: Detailed dimensions of the Eliza Nightstand: 66 cm width, 36 cm depth, and 60 cm height. Drawer internal width is approximately 61.8 cm and height 21.7 cm.
3. Setup and Assembly
The Vicco Eliza Nightstand requires assembly. It is recommended that one person performs the assembly.
3.1 Required Tools
- Screwdriver (not included)
3.2 Assembly Steps
Please refer to the detailed assembly instructions provided in the packaging. The instructions are in German. Follow these general guidelines for a smooth assembly:
- Unpack all components: Carefully remove all parts from the packaging and verify against the parts list in the manual. Ensure no parts are missing or damaged.
- Identify parts: Although parts may not be numbered, identify each component by comparing it with the diagrams in the assembly manual.
- Assemble the frame: Begin by connecting the main structural panels according to the diagrams. Ensure all connections are secure.
- Install drawer runners: Attach the drawer runners to the side panels of the nightstand and the drawer boxes. Pay close attention to the orientation of the runners to ensure smooth operation.
- Assemble drawers: Construct the drawer boxes. Insert the bottom panel into the grooves and secure the back panel.
- Attach drawer fronts: Secure the drawer fronts to the assembled drawer boxes. Ensure they are aligned correctly.
- Insert drawers: Carefully slide the assembled drawers into the nightstand frame. Test for smooth operation.
- Attach handles: Secure the handles to the drawer fronts.
- Install feet: Attach the legs/feet to the base of the nightstand.
- Wall anchoring: For safety, anchor the nightstand to the wall using appropriate hardware (not always included, check your package contents). This prevents tipping.
Figure 3.1: An overview of the nightstand, showing its closed state and an exploded view of the drawers, indicating the assembly process.
Figure 3.2: Close-up view of the open drawers, illustrating the drawer runners and internal construction, crucial for correct assembly.
4. Operating Instructions
The Vicco Eliza Nightstand is designed for personal use in a bedroom.
4.1 Using the Drawers
- Gently pull the handles to open the drawers.
- Push the drawers firmly but smoothly to close them completely.
- Avoid overloading the drawers to ensure smooth operation and prevent damage to the runners.
4.2 Placement
- Place the nightstand on a flat, stable surface to prevent wobbling.
- Ensure it is not exposed to direct sunlight or excessive moisture, which can damage the material.
Figure 4.1: The nightstand with both drawers partially open, demonstrating its storage capacity and accessibility.
5. Maintenance
To ensure the longevity and appearance of your Vicco Eliza Nightstand, follow these maintenance guidelines:
- Cleaning: Wipe surfaces with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals, as these can damage the melamine coating.
- Spills: Immediately wipe up any spills to prevent staining or moisture damage.
- Hardware: Periodically check all screws and fittings to ensure they are tight. Retighten if necessary to maintain stability.
- Avoid excessive weight: Do not place items heavier than the recommended maximum weight (21.8 kg) on the nightstand.
6. Troubleshooting
If you encounter any issues with your Vicco Eliza Nightstand, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Nightstand is wobbly. | Uneven floor or loose fittings. |
|
| Drawers do not slide smoothly or open/close by themselves. | Incorrectly installed drawer runners, misaligned drawer boxes, or overloaded drawers. |
|
| Missing parts during assembly. | Packaging error or parts overlooked. |
|
7. Specifications
| Feature | Detail |
|---|---|
| Brand | Vicco |
| Model Name | Eliza |
| Model Number | 40425 |
| Color | Grey |
| Product Dimensions (D x W x H) | 36 cm x 66 cm x 60 cm |
| Item Weight | 19.8 Kilograms |
| Maximum Recommended Weight | 21.8 Kilograms |
| Frame Material | Engineered Wood (16 mm particle board) |
| Finish Type | Melamine Resin Coating (Laminated) |
| Number of Drawers | 2 |
| Assembly Required | Yes |
| Recommended Assembly Persons | 1 |
| Recommended Tools | Screwdriver |
| Intended Use | Indoor, personal use in a bedroom |
8. Warranty and Support
Specific warranty details for the Vicco Eliza Nightstand are not provided in this manual. Please refer to your purchase documentation or contact the retailer for warranty information.
For customer support, assembly assistance, or to report missing/damaged parts, please contact the seller "ok-living" directly through the platform where you made your purchase.