Introduction
Thank you for choosing the DUNAGA Zap T360 Pro Indoor Insect Trap. This device is designed to effectively attract and capture various flying insects such as fruit flies, gnats, and mosquitoes, providing a more comfortable indoor environment. It utilizes UV light attraction and a powerful fan to draw insects onto a replaceable sticky glue board. Please read this manual thoroughly before use to ensure proper operation and maintenance.
Safety Information
- Keep out of reach of children and pets.
- This device is for indoor use only. Do not expose to water or high humidity.
- Do not insert fingers or foreign objects into the device while it is operating.
- Ensure the device is placed on a stable, flat surface.
- Unplug the device before cleaning or replacing the sticky glue board.
- Do not attempt to repair or modify the device. Contact customer support for assistance.
Package Contents
- 1 x DUNAGA Zap T360 Pro Indoor Insect Trap
- 10 x Sticky Glue Boards
- 1 x USB Power Cable
- 1 x Power Adapter
Product Overview
Familiarize yourself with the components of your DUNAGA Zap T360 Pro:
Figure 1: DUNAGA Zap T360 Pro Insect Trap and included sticky glue boards.
Figure 2: Exploded view illustrating the attracting light wave, anti-escape powerful fans, and the sticky glue board.
- UV Light Source: Emits specific wavelengths (365-400nm) to attract various flying insects.
- Powerful Fan: Creates a strong airflow to draw insects into the trap.
- Sticky Glue Board: Located at the bottom, it captures insects drawn in by the fan.
- Power Button: To turn the device on/off.
- Light Button: To change light modes (if applicable).
- Removable Tray: For easy replacement of sticky glue boards.
Setup
- Unpack: Carefully remove all components from the packaging.
- Place Sticky Board: Ensure a sticky glue board is correctly placed in the bottom tray. If not, refer to the "Maintenance" section for instructions on how to install one.
- Position the Trap: Place the insect trap on a stable, flat surface in an area where flying insects are prevalent, such as a kitchen, living room, or bedroom. For best results, place it away from strong light sources and drafts.
- Connect Power: Connect the USB power cable to the device and then to the power adapter. Plug the adapter into a standard electrical outlet. The device can also be powered by a power bank or PC USB port for portability.
Figure 3: Powering the device using various USB sources.
Operating Instructions
- Power On: Press the Power Button (usually indicated by a power symbol) on the top of the device. The UV light will illuminate, and the fan will start operating.
Figure 4: Location of the Power and Light buttons.
- Light Modes (if applicable): If your model features multiple light wavelengths, press the Light Button to cycle through the available modes. Some models may have a smartband change mode with 7 kinds of wavelengths that automatically switch every 15 minutes.
- Continuous Operation: For optimal results, it is recommended to keep the device running continuously, especially during periods of high insect activity.
- Power Off: To turn off the device, press the Power Button again.
Video 1: Demonstration of the DUNAGA Zap T360 Pro in operation, showing the blue UV light and the fan mechanism. This video illustrates the device's functionality and quiet operation.
Video 2: A brief demonstration of the DUNAGA Zap T360 Pro, highlighting its effectiveness in attracting and trapping insects. The video shows the device's light and fan in action.
Maintenance
Regular maintenance ensures optimal performance of your insect trap.
- Replacing Sticky Glue Boards:
- Ensure the device is unplugged before proceeding.
- Press the button on the side of the device to release and open the bottom tray.
- Carefully remove the used sticky glue board. Dispose of it properly.
- Peel off the protective layer from a new sticky glue board.
- Place the new sticky glue board into the tray, ensuring it sits flat.
- Close the bottom tray securely until it clicks into place.
Figure 5: Step-by-step guide for replacing sticky glue boards.
Video 3: This video demonstrates the process of opening the bottom tray and replacing the sticky glue board, showing the ease of maintenance for the insect trap.
- Cleaning the Device:
- Wipe the exterior of the device with a soft, dry cloth.
- Do not use abrasive cleaners or immerse the device in water.
- Periodically check the fan area for any debris and gently clean if necessary (ensure device is unplugged).
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Device does not turn on. | Not plugged in correctly or no power. | Ensure the USB cable is securely connected and the power adapter is plugged into a working outlet. Try a different outlet or USB power source. |
| Few or no insects are being caught. | Incorrect placement, sticky board full, or light interference. | Relocate the trap to an area with higher insect activity. Replace the sticky glue board if full. Ensure the trap is not placed near competing light sources. Operate continuously. |
| Fan is not working. | Obstruction or device malfunction. | Unplug the device and check for any obstructions in the fan area. If the problem persists, contact customer support. |
Specifications
| Feature | Detail |
|---|---|
| Brand | DUNAGA |
| Model Number | Zap T360 Pro |
| Color | Black |
| Style | Compact |
| Product Dimensions | Approx. 5.3" (W) x 8.5" (H) |
| Item Weight | 1.34 pounds (0.61 kg) |
| Power Source | USB (Adapter included) |
| Target Species | Fly, Gnat, Mosquito |
| Included Accessories | 10 Sticky Glue Boards |
Warranty and Support
For warranty information or technical support, please refer to the product packaging or contact DUNAGA customer service directly. Keep your purchase receipt for warranty claims.