LiTHELi Portable Charger 4.0Ah Lithium Batteries 45W Max Power Bank

Introduction

This manual provides essential information for the safe and effective operation, maintenance, and troubleshooting of your LiTHELi Portable Charger 4.0Ah Lithium Power Bank. Please read this manual thoroughly before using the product to ensure proper functionality and to prevent damage or injury.

The U-Battery Plus power bank is designed to provide reliable power for a wide range of electronic devices and is compatible with Litheli U20 power tools, offering versatile functionality for both personal and outdoor use.

Important Safety Information

• Do not disassemble, open, or shred the battery pack.
• Do not expose the battery pack to heat or fire. Avoid storage in direct sunlight.
• Do not short-circuit a battery pack. Do not store battery packs haphazardly in a box or drawer where they may short-circuit each other or be short-circuited by conductive materials.
• Do not subject battery pack to mechanical shock.
• In the event of battery leakage, do not allow the liquid to come into contact with the skin or eyes. If contact has been made, wash the affected area with copious amounts of water and seek medical advice.
• Keep the battery pack clean and dry.
• Recharge only with the charger specified by LiTHELi.
• Do not use any charger other than that specifically provided for use with the equipment.
• Do not use any battery pack which is not designed for use with the equipment.
• Keep battery packs out of the reach of children.
• Observe the plus (+) and minus (-) marks on the battery and equipment and ensure correct use.
• The battery pack is designed with EV-grade cells, safe for extreme temperatures down to -20℃. However, avoid prolonged exposure to temperatures above 55℃.

Package Contents

• LiTHELi Portable Charger 4.0Ah Lithium Power Bank (U20BY03)
• USB-C to USB-C Charging Cable
• User Manual

Note: Additional charging accessories or U20 tools are sold separately.

Product Overview

Figure 1: LiTHELi Portable Power Bank (U20BY03) with included USB-C cable.

Figure 2: Internal view highlighting multi-protection technology including overheat, short circuit, over voltage, over current, over discharge, and over charge protection.

Figure 3: Compact size of the U-Battery Plus, comparable to a smartphone, demonstrating its portability.

Figure 4: The power bank's universal compatibility with various electronic devices and its air travel friendly design.

Components:

• Power Button/Indicator: Activates the power bank and displays charge status.
• USB-C Ports (2-way): For charging the power bank or charging compatible devices (up to 45W output).
• USB-A Ports (Dual): For charging compatible devices.
• Tool Interface: Connects directly to Litheli U20 power tools.

Setup

First Use:

Before initial use, it is recommended to fully charge your LiTHELi Portable Power Bank. This ensures optimal performance and battery longevity.

Checking Battery Level:

Press the power button on the power bank. The LED indicators will illuminate to show the current charge level. A full charge is indicated when all LEDs are solid.

Operating Instructions

Charging Electronic Devices:

1. Connect one end of a compatible USB cable (USB-C to USB-C, or USB-A to your device's port) to the appropriate port on the power bank.
2. Connect the other end of the cable to your electronic device (e.g., smartphone, tablet, laptop, drone).
3. The power bank will automatically begin charging your device. The LED indicators will show the power bank's remaining charge.
4. You can charge two devices simultaneously using the dual USB-A and two-way USB-C output ports.

Figure 5: The power bank's ability to fast charge multiple devices, including laptops, with its 45W output.

Powering Litheli U20 Tools:

The U-Battery Plus is designed to seamlessly integrate with Litheli U20 power tools, providing a portable and efficient power source for your outdoor and DIY projects.

1. Ensure the power bank is adequately charged.
2. Locate the battery compartment on your Litheli U20 tool.
3. Align the power bank with the tool's battery interface and firmly insert it until it clicks into place.
4. Refer to your specific Litheli U20 tool's manual for operating instructions.

Figure 6: The power bank's extensive compatibility with over 100 Litheli U20 products, including various power tools.

Demonstration of U20 Tool Compatibility:

Charging the Power Bank

The U-Battery Plus can be recharged using its USB-C input port. For fastest charging, use a 45W or higher power delivery charger (not included).

1. Connect the provided USB-C to USB-C cable to one of the USB-C ports on the power bank.
2. Connect the other end of the USB-C cable to a compatible USB-C power adapter or charging port.
3. The LED indicators on the power bank will flash to indicate charging is in progress. Once fully charged, all LEDs will remain solid.

Figure 7: Illustration of charging the power bank using a USB-C cable, demonstrating fast charging capabilities with appropriate adapters.

Maintenance

• Keep the power bank clean and dry. Wipe with a soft, damp cloth if necessary. Do not use harsh chemicals or abrasive cleaners.
• Store the power bank in a cool, dry place away from direct sunlight and extreme temperatures.
• If storing for extended periods, charge the power bank to approximately 50-70% every 3-6 months to maintain battery health.

Troubleshooting

Specifications

Warranty and Support

LiTHELi products are manufactured to high-quality standards. This power bank is covered by a manufacturer's warranty. While specific warranty details are not provided in this manual, typically LiTHELi batteries come with a 1-year warranty.

For detailed warranty information, technical support, or service inquiries, please visit the official LiTHELi website or contact their customer service directly. Keep your purchase receipt as proof of purchase for warranty claims.

Official LiTHELi Store: LiTHELi Amazon Store