Important Safety Information
Please read these instructions carefully before installing or operating this fixture. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause injury or property damage.
- WARNING: Risk of electric shock. Disconnect power at the circuit breaker or fuse box before installation or servicing.
- All electrical connections must be in accordance with local codes, ordinances, or the National Electric Code (NEC). Contact a qualified electrician if you are unfamiliar with proper electrical wiring connections.
- Use only UL or ETL listed wire connectors.
- This fixture is designed for indoor use only.
- Do not exceed the maximum wattage specified for the bulb.
- Handle the fixture with care. Avoid dropping or striking it.
Package Contents
Verify that all components are present before beginning installation:
- Single ADA Sconce fixture (Model 51171-05)
- Mounting hardware (crossbar, mounting screws, wire connectors)
- Instruction sheet
Note: Bulbs are not included and must be purchased separately.
Tools Required (Not Included)
- Phillips head screwdriver
- Flathead screwdriver
- Wire strippers
- Electrical tape
- Pliers
- Safety glasses
Specifications
| Model Number | 51171-05 |
| Brand | Livex Lighting |
| Finish | Polished Chrome |
| Material | Alloy Steel |
| Light Source | 1 Light (Bulb not included) |
| Max Wattage | 60 watts |
| Voltage | 120 Volts |
| Mounting Type | Wall Mount |
| Dimensions (L x W x H) | 3"L x 5.13"W x 8"H |
| Item Weight | 2 Pounds |
Setup and Installation
Follow these steps to properly install your Livex Lighting Copenhagen Single ADA Sconce. Ensure power is disconnected at the circuit breaker before starting.
- Prepare the Installation Area: Turn off power at the main electrical panel. Remove the existing fixture if applicable. Ensure the junction box is securely mounted to the wall.
- Attach Mounting Crossbar: Secure the mounting crossbar to the junction box using the provided mounting screws. Ensure the crossbar is level and firmly attached.
- Make Electrical Connections: Carefully connect the fixture's wires to the house electrical wires.
- Connect the black (hot) wire from the fixture to the black (hot) wire from the junction box.
- Connect the white (neutral) wire from the fixture to the white (neutral) wire from the junction box.
- Connect the ground wire from the fixture to the ground wire from the junction box (usually bare copper or green).
- Mount the Fixture: Align the fixture's backplate with the mounting screws on the crossbar. Secure the fixture to the crossbar using the decorative nuts or screws provided. Ensure the fixture is flush against the wall.
- Install the Bulb: Insert one (1) appropriate bulb (not included) into the fixture's socket. Do not exceed the maximum wattage of 60 watts.
- Restore Power: Turn the power back on at the circuit breaker. Test the fixture to ensure it functions correctly.
Figure 1: Livex Lighting Copenhagen Single ADA Sconce (Polished Chrome) installed in a room setting.
Figure 2: Detailed view of the sconce's polished chrome finish and bulb socket.
Operating Instructions
This fixture operates like any standard wall-mounted light. Once installed and powered, it can be turned on and off using the wall switch connected to its circuit.
- Ensure the correct bulb type and wattage (max 60W) are used.
- For optimal performance and longevity, use high-quality LED bulbs.
Maintenance
Regular maintenance ensures the longevity and appearance of your fixture.
- Cleaning: Always disconnect power before cleaning. Wipe the fixture with a soft, dry cloth. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
- Bulb Replacement: Disconnect power before replacing the bulb. Allow the bulb to cool completely before touching. Unscrew the old bulb and screw in a new one of the correct type and wattage (max 60W).
- Inspection: Periodically check for any loose wiring or damaged components. If any issues are found, disconnect power and consult a qualified electrician.
Troubleshooting
If you encounter issues with your fixture, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Fixture does not light up | No power to the fixture Loose wire connection Faulty bulb | Check circuit breaker/fuse. Ensure wall switch is ON. Turn off power, check all wire connections. Replace bulb with a new one. |
| Bulb flickers | Loose bulb Incorrect bulb type/wattage Loose wire connection | Tighten bulb in socket. Ensure bulb meets specifications (max 60W). Turn off power, check all wire connections. |
| Fixture hums | Incompatible dimmer switch Loose wiring | Ensure dimmer switch is compatible with the bulb type. Consult an electrician. Turn off power, check all wire connections. |
If the problem persists after attempting these solutions, consult a qualified electrician.
Warranty and Support
This Livex Lighting fixture is covered by a limited manufacturer's warranty. For specific warranty details and claims, please refer to the documentation included with your purchase or visit the official Livex Lighting website.
For technical support, replacement parts, or further assistance, please contact Livex Lighting customer service. You can find more information and contact options on the Livex Lighting Brand Store.