SIXRAY Green Beam and Flashlight for Pistol Instruction Manual

Introduction

This manual provides comprehensive instructions for the safe and effective use of your SIXRAY Green Beam and Flashlight Combo for Pistols. This rail-mounted device integrates a powerful 600-lumen white light with a Class II green laser, designed for enhanced targeting and illumination in various applications including self-defense, law enforcement, and hunting. Please read this manual thoroughly before installation and operation to ensure proper functionality and safety.

Package Contents

• SIXRAY Pistol Light Laser Combo
• Charging Cable
• Allen Wrench
• One mounting screw

Safety Information

Always handle firearms responsibly and follow all applicable safety guidelines. The laser emitted by this device is a Class II laser with an output of less than 1 mW. Avoid direct eye exposure to the laser beam. Do not point the laser at aircraft or vehicles. Ensure the device is securely mounted before use. Keep out of reach of children.

Compatibility and Installation

This pistol light and laser combo is designed for pistols equipped with a Picatinny rail. For proper fitment, the pistol must have a Picatinny rail with at least one slot, and the installation space from the slot to the trigger guard must be greater than 20 mm.

Figure 1: Pistol compatibility requirements. The pistol must have a Picatinny rail with one slot, and the installation space from the slot to the trigger guard must be greater than 20 mm.

Figure 2: Examples of pistols that are not compatible due to lack of Picatinny rail, no rail and slot, or insufficient installation space (less than 20 mm).

Mounting Instructions:

1. Identify the Picatinny rail on your pistol.
2. The device features three alternative screw holes and an adjustable rail clamp. Select the screw hole that best aligns with your pistol's rail slot to ensure a secure fit.
3. Align the light/laser combo with the rail and insert the provided screw into the chosen hole.
4. Use the included Allen wrench to tighten the screw firmly, ensuring the device is stable and does not wobble. Do not overtighten.

Figure 3: The adjustable screw and three locking holes design allow for adaptable mounting to various pistol rails.

Charging the Device

The SIXRAY Pistol Light Laser Combo is equipped with a rechargeable Lithium-Ion battery. It features magnetic charging for convenience, allowing you to charge the device without removing it from your firearm.

Figure 4: Magnetic charging port for easy recharging without detaching the unit.

Charging Process:

• Connect the provided charging cable to the magnetic charging port on the device.
• Connect the other end of the cable to a suitable USB power source.
• A red indicator light will illuminate during charging.
• The indicator light will turn green when the device is fully charged.
• A full charge typically takes approximately 2 hours.

Figure 5: Charging indicator (red for charging, green for fully charged) and approximate run times for different modes.

Battery Runtime:

• Light Only: Approximately 1 hour
• Laser Only: Approximately 8 hours
• Light + Laser: Approximately 1 hour

Operating Instructions

The device features intuitive controls for quick mode switching.

Figure 6: The device features dual switches for controlling the laser and light functions, offering four distinct modes.

Modes of Operation:

• Laser Only: Press the laser switch once to activate the green laser beam.
• Light Only (Steady On): Press the light switch once to activate the 600-lumen white light in steady-on mode.
• Light + Laser: Press both the light and laser switches once to activate both the white light and green laser simultaneously.
• Strobe Light: Quickly press the light switch twice within 0.5 seconds to activate the strobe light feature.
• Momentary Strobe: Hold the light switch for momentary strobe. Release to turn off.

Figure 7: Visual representation of the different operating modes: Steady On White Light, Strobe White Light, Green Laser, and White Light + Green Laser.

The 600-lumen white light provides a concentrated beam distance of 125 meters, illuminating dark areas effectively.

Figure 8: The flashlight boasts a maximum output of 600 lumens and a throw distance of 125 meters (approximately 410 feet).

Laser Adjustment

The green laser beam is adjustable for both windage and elevation to ensure accurate targeting.

Figure 9: Adjustment points for windage (horizontal) and elevation (vertical) to fine-tune the laser's aim.

Adjustment Procedure:

• Locate the adjustment screws on the device. Typically, one screw controls windage (left/right) and another controls elevation (up/down).
• Use a small Allen wrench (often included) to make precise adjustments.
• Turn the screws incrementally and test the laser's point of impact until it aligns with your desired target point.

Maintenance

• Keep the device clean by wiping it with a soft, dry cloth.
• Avoid using abrasive cleaners or solvents.
• Ensure the charging port is free of debris before charging.
• Store the device in a cool, dry place when not in use.

Troubleshooting

Specifications

Warranty and Support

This SIXRAY product comes with a limited warranty of 12 months from the date of purchase. For warranty claims, technical support, or any inquiries, please contact SIXRAY customer service through the retailer where the product was purchased or visit the official SIXRAY store on Amazon: SIXRAY Store.