Cuteefun Automatic Liquid Soap Dispenser User Manual

1. Introduction

Thank you for purchasing the Cuteefun Automatic Liquid Soap Dispenser. This touchless dispenser is designed for convenience and hygiene, featuring adjustable volume levels, USB-C recharging, and versatile installation options (wall-mount or tabletop). Please read this manual carefully before use to ensure proper operation and maintenance.

2. Safety Information

• Do not immerse the dispenser in water. It is IPX5 water-resistant, meaning it can withstand splashes, but not submersion.
• Use only liquid soap or hand sanitizer. Do not use granular, powdered, or thick gel soaps that may clog the dispenser.
• Keep out of reach of children.
• Do not disassemble or attempt to repair the device yourself. Contact customer support for assistance.
• Ensure the USB-C charging port is dry before charging.

3. Package Contents

Verify that all items are present in the package:

• Cuteefun Automatic Liquid Soap Dispenser (1 unit)
• USB-C Charging Cable (1 unit)
• Wall-mount Adhesive Hooks (2 units)
• User Manual (this document)

4. Product Overview

Familiarize yourself with the main components of your soap dispenser.

Figure 4.1: Front view of the Cuteefun Automatic Liquid Soap Dispenser.

This image displays the white cylindrical soap dispenser with a black top panel and a clear liquid level indicator. A hand is positioned under the nozzle, receiving liquid soap. Two clear adhesive hooks and a USB-C charging cable are also shown, indicating wall-mount and charging capabilities.

Key Features:

• Touchless Operation: Infrared sensor for automatic dispensing.
• Adjustable Volume: 4 levels of soap output.
• USB-C Rechargeable: Long-lasting battery life.
• Dual Installation: Wall-mounted or tabletop use.
• Large Capacity: 380ml liquid reservoir.
• Durable Material: High-quality ABS, waterproof (IPX5) and leak-proof.

5. Setup

5.1 Charging the Dispenser

Before first use, fully charge the dispenser. A full charge can last up to three months or approximately 2000 uses.

1. Locate the USB-C charging port on the side of the dispenser.
2. Connect the provided USB-C cable to the dispenser and the other end to a compatible USB power adapter (not included).
3. The LED power display on the top panel will indicate charging status. When fully charged, the indicators will show full power.

Figure 5.1: Charging the dispenser via USB-C.

This image shows the white soap dispenser with a USB-C cable plugged into its side port, indicating the charging process. Text overlays highlight "RECHARGEABLE BATTERY USB-C CHARGING PORT" and "3H Full Charge 30 Days Running Time".

5.2 Filling the Dispenser

The dispenser has a 380ml capacity for liquid soap.

1. Gently twist the top section of the dispenser counter-clockwise to separate it from the liquid reservoir.
2. Pour liquid soap directly into the reservoir. Do not overfill.
3. Align the top section with the reservoir and twist clockwise to secure it back in place.

Figure 5.2: Filling the liquid soap reservoir.

This image illustrates the process of filling the soap dispenser. The top part of the dispenser is detached, and a hand is pouring liquid from a glass into the open reservoir. Text indicates "380ML LARGE CAPACITY WATER TANK".

5.3 Installation Options (Tabletop or Wall-Mount)

The dispenser offers flexible placement options.

Tabletop Placement:

Simply place the dispenser on any flat, stable surface in your bathroom, kitchen, or other desired location.

Wall-Mount Installation:

1. Clean and dry the desired wall surface thoroughly.
2. Peel off the protective film from the back of one adhesive hook.
3. Press the adhesive hook firmly onto the wall at the desired height, ensuring it is level. Apply pressure for a few seconds to ensure good adhesion.
4. Wait at least 24 hours before hanging the dispenser to allow the adhesive to fully cure.
5. Align the dispenser's hanging slot with the hook and slide it down to secure.

Figure 5.3: Wall-mounted and tabletop placement options.

This image displays two soap dispensers: one is shown mounted on a wall, and the other is placed on a tabletop, illustrating the dual installation options. Text highlights "WALL MOUNTED OR PLACED ON A TABLE".

Figure 5.4: Detail of the self-contained hook for wall mounting.

This image provides a close-up view of the back of the dispenser, highlighting the integrated hook designed for wall mounting. The text "Self-Contained Hook" is visible.

6. Operation

6.1 Power On/Off

• To power on: Press and hold the power button (located on the top panel) for 2 seconds.
• To power off: Press and hold the power button for 3 seconds.

6.2 Dispensing Soap

Once powered on, the dispenser is ready for use.

1. Place your hand directly under the nozzle, within range of the infrared sensor.
2. The dispenser will automatically dispense soap in approximately 0.25 seconds.
3. Remove your hand once the desired amount of soap is dispensed.

Figure 6.1: Adjustable soap volume levels.

This image illustrates the top panel of the dispenser with indicators for four adjustable soap volume levels (Level 1-4) and battery display. It also shows the power on/off button. Text highlights "4 LEVELS ADJUSTABLE SOAP VOLUME".

6.3 Adjusting Soap Volume

The dispenser offers 4 adjustable volume levels to suit different needs.

1. Tap the button on the top panel (next to the power button) to cycle through the volume levels.
2. Each tap will change the level, indicated by the number of lights illuminated on the display.
3. Level 1: Shortest dispense time (e.g., for daily hand washing).
4. Level 4: Longest dispense time (e.g., for decontamination or larger needs).

7. Maintenance

7.1 Cleaning the Dispenser

• Wipe the exterior of the dispenser with a soft, damp cloth.
• Do not use abrasive cleaners or solvents.
• Ensure the sensor area and nozzle are kept clean and free of soap residue to prevent blockages and ensure proper operation.

7.2 Refilling the Dispenser

Refill the dispenser when the liquid level indicator shows low soap. Refer to Section 5.2 for detailed filling instructions.

8. Troubleshooting

9. Specifications

Figure 9.1: Approximate product dimensions.

This image provides a diagram showing the dimensions of the soap dispenser: approximately 21.9cm in height, 7cm in diameter at the base, and 9.8cm in width at the top including the nozzle.

10. Warranty and Support

For warranty information or technical support, please contact Cuteefun customer service through the retailer where you purchased the product or visit the official Cuteefun store on Amazon: Cuteefun Store.

Please have your model number (WC-PH-1462B) and purchase details ready when contacting support.