EZTAT2 Lola Air Wireless Permanent Makeup Tattoo Machine Kit

Introduction

This manual provides comprehensive instructions for the safe and effective use of your EZTAT2 Lola Air Wireless Permanent Makeup Tattoo Machine Kit. Please read this manual thoroughly before operating the device to ensure optimal performance and longevity.

Safety Information

Always prioritize safety when using this equipment. This device is intended for professional use or under professional supervision. Improper use can lead to injury or damage.

• Ensure the device is fully charged before use to avoid power interruptions during procedures.
• Use only compatible and sterile cartridge needles.
• Do not immerse the machine in water or any liquids.
• Keep the device out of reach of children.
• Disconnect power before cleaning or performing any maintenance.
• Consult a medical professional if you experience any adverse reactions.

Package Contents

Your EZTAT2 Lola Air Wireless Permanent Makeup Tattoo Machine Kit includes the following items:

• 1x Lola Air Permanent Makeup Tattoo Machine
• 2x Additional Tattoo Battery Power Supplies (total of 3 batteries, 1500mAh each)
• 20x SMP Tattoo Cartridge Needles (5x0601RL, 5x0801RL, 5x1001RL, 5x1201RL)
• 2x Practice Skins (1x face practice skin, 1x double-sided practice skin)
• 40x Tattoo Ink Cups
• 1x Tattoo Grip Bandage
• 1x Box of Tattoo Machine Covers
• 1x Pair of Tattoo Gloves
• 1x Charging Cable

Product Features

Wireless Mobility and Versatility

The Lola Air series wireless tattoo machine offers enhanced mobility and handling, allowing artists to work without restrictive cords. It is ideal for various permanent makeup applications, including eyebrows, eyeliner, lips, and hair tattoo (scalp micropigmentation), as well as small tattoos.

Extended Battery Life

The Lola Air wireless tattoo pen comes with three 1500mAh batteries, providing a total working time of up to 6 hours. Each battery offers 2-3 hours of continuous operation and takes approximately 1.5 hours to fully charge.

Efficient Coreless Motor

Equipped with an EZ customized coreless motor and a 2.7mm stroke length, the machine performs effectively for both lining and shading. Its lightweight design, weighing only 85.4g (3oz), ensures hand comfort and reduces fatigue during extended use.

Ergonomic and Lightweight Design

The Lola Air machine features an ergonomic design that is thinner and lighter, enhancing user comfort and control. The visual LED screen allows for easy voltage adjustment in 0.1V increments, simplifying operation.

Broad Cartridge Compatibility

The machine is fully compatible with most standard tattoo cartridge needle types, including those for liners, shaders, flat magnums, and round/curved magnums, ensuring versatility and ease of use.

Setup Instructions

1. Charge Batteries: Before first use, fully charge all three battery power supplies using the provided charging cable. The LED display will indicate charging status and capacity.
2. Attach Battery: Twist one of the charged battery power supplies onto the Lola Air tattoo machine pen until securely fastened.
3. Insert Cartridge Needle: Carefully push a sterile cartridge needle into the front opening of the machine until it clicks into place. Ensure it is seated firmly.
4. Adjust Needle Depth: Rotate the grip of the machine to adjust the needle protrusion (depth) to your desired setting. Test on practice skin before actual use.
5. Prepare Ink: Pour a small amount of tattoo ink into a sterile ink cup.

Operating Instructions

1. Power On: Press and hold the power button (usually the 'O' button) on the battery display for a few seconds until the LED screen illuminates.
2. Adjust Voltage: Use the '+' and '-' buttons to increase or decrease the voltage. Start with a lower voltage and gradually increase to find the optimal setting for your procedure and needle type. The recommended voltage range is typically 5.0V-10.0V.
3. Dip Needle: Gently dip the tip of the cartridge needle into the ink cup to load ink.
4. Begin Procedure: Apply the needle to the practice skin or prepared area with steady, controlled movements.
5. Power Off: After use, press and hold the power button until the LED screen turns off.
6. Replace Battery: If the battery runs low during a procedure, twist off the current battery and replace it with a fully charged one.

Maintenance

• Cleaning: After each use, carefully remove and dispose of the used cartridge needle. Wipe down the machine's exterior with a sterile wipe or a cloth dampened with an approved disinfectant solution. Do not allow liquids to enter the motor housing.
• Storage: Store the machine and its components in a clean, dry place, away from direct sunlight and extreme temperatures. Use the provided carrying case for protection.
• Battery Care: Store batteries in a cool, dry place. Avoid overcharging or completely draining batteries frequently to prolong their lifespan.

Troubleshooting

• Machine Not Turning On: Ensure the battery is fully charged and properly attached. If issues persist, try a different charged battery.
• Inconsistent Power/Performance: Check battery charge. Ensure the cartridge needle is correctly inserted and not damaged. Clean any debris from the needle connection area.
• Needle Not Moving: Verify the cartridge needle is fully seated. Check for any obstructions. If the motor sounds weak, the battery may be low.
• Excessive Vibration/Noise: Ensure the cartridge needle is correctly installed. If the issue persists, the needle may be faulty, or the machine may require servicing.

Specifications

Warranty and Support

The EZTAT2 Lola Air Wireless Permanent Makeup Tattoo Machine Kit comes with a One Year Warranty from the date of purchase. This warranty covers manufacturing defects under normal use.

For technical support, warranty claims, or any questions regarding your product, please contact EZTAT2 customer service through the retailer where the product was purchased or visit the official EZTAT2 website for contact information.