POGOLAB UHF Wireless Saxophone Microphone System

Introduction

This manual provides detailed instructions for the setup, operation, and maintenance of your POGOLAB UHF Wireless Saxophone Microphone System. Designed for saxophones and other brass instruments, this system offers stable wireless transmission and high-quality audio capture. Please read this manual thoroughly before using the product to ensure optimal performance and longevity.

Package Contents

• 1 x Transmitter
• 1 x Receiver
• 1 x Storage Case
• 1 x Dual USB Charging Cable

Key Features

• UHF Stable Transmission: Offers stable transmission up to 164 feet (50m) in open areas with minimal delay. Features 4 switchable signal channels to avoid interference.
• Clip-On Transmitter: Equipped with a high-sensitivity condenser microphone for clear and realistic voice capture, automatically reducing ambient noise. The clip includes a rubber pad to securely attach to instruments without causing damage.
• Accompaniment Playback: Supports Bluetooth connection or audio cable input for playing background music, enhancing performance versatility.
• 5 Hours Battery Life: Built-in rechargeable battery provides approximately 5 hours of operation on a full charge. Includes a dual USB cable for simultaneous charging of transmitter and receiver. An indicator light signals low battery.
• Instrument Compatibility: Specifically designed for saxophones and other brass instruments such as euphonium, baritone, French horn, and cornet. The receiver features a 6.35mm plug for connection to speakers and amplifiers.

Setup Guide

1. Initial Charging

Before first use, fully charge both the transmitter and receiver using the provided dual USB charging cable. An indicator light will show charging status (red light on when charging, off when fully charged).

2. Attaching the Transmitter

1. Carefully open the clip on the transmitter.
2. Attach the transmitter to the bell of your saxophone or other brass instrument. Ensure the rubber pad on the clip protects the instrument's finish.
3. Adjust the flexible gooseneck of the microphone to position it optimally for sound capture, typically pointing towards the instrument's sound source.

3. Connecting the Receiver

1. Plug the 6.35mm jack of the receiver into the microphone input of your amplifier, mixer, or speaker.
2. The receiver features a 220° rotatable plug for flexible positioning.

Setup and Connection Video

Video: This video demonstrates the setup and connection process of a similar wireless saxophone microphone system, including attaching the transmitter and plugging in the receiver.

Video: A demonstration of clipping the microphone onto an instrument and connecting the receiver to a speaker.

Operation

1. Power On/Off

Press and hold the power button on both the transmitter and receiver to turn them on or off. Ensure both units are powered on for operation.

2. Channel Adjustment and Pairing

The system supports 4 switchable channels to avoid interference. To adjust channels and pair the units:

1. Ensure both transmitter and receiver are powered off.
2. On the transmitter, press and hold the power button and the volume down button simultaneously for 5 seconds to enter channel adjustment mode.
3. Use the up/down buttons on the transmitter to select a desired channel.
4. On the receiver, long press the SET button to unlock the screen.
5. Use the up/down buttons on the receiver to select the same channel as the transmitter.
6. Once the channels match, the units should automatically pair.

Video: This video provides instructions on how to change the frequency and pair the transmitter and receiver units of a wireless microphone system.

3. Treble/Bass/Middle Adjustment

Use the dedicated knobs on the transmitter to adjust the volume, bass, middle, and treble levels to achieve your desired sound. Experiment with these settings to find the best tone for your instrument and performance environment.

4. Bluetooth Accompaniment

To play background music, connect your device (e.g., smartphone, tablet) to the system via Bluetooth or by plugging an audio cable into the AUX IN port on the transmitter. This allows for seamless integration of accompaniment with your instrument's sound.

Maintenance

• Cleaning: Use a soft, dry cloth to clean the surfaces of the transmitter and receiver. Avoid using harsh chemicals or abrasive materials.
• Storage: Store the system in its provided storage case in a cool, dry place when not in use. Avoid extreme temperatures and humidity.
• Battery Care: To prolong battery life, avoid fully discharging the units frequently. Recharge them regularly, even if not in constant use.

Troubleshooting

• No Sound:
  • Ensure both the transmitter and receiver are powered on.
  • Check all cable connections to the amplifier/mixer.
  • Verify that the transmitter and receiver are successfully paired to the same channel.
  • Confirm the volume levels on both the microphone system and the connected audio device are adequate.
• Interference/Poor Sound Quality:
  • Try switching to a different channel on both the transmitter and receiver to avoid local signal interference.
  • Ensure there are no large obstructions between the transmitter and receiver.
• Low Volume:
  • Adjust the volume knob on the transmitter.
  • Increase the input gain or volume on your connected amplifier/mixer.
• Pairing Issues:
  • Repeat the channel adjustment and pairing steps carefully.
  • Ensure both units are fully charged.

Product Specifications

Warranty and Support

For warranty information or technical support, please refer to the product packaging or contact POGOLAB customer service directly. Keep your purchase receipt for any warranty claims.