AOBOSI 200W Slow Juicer

1. Product Overview

The AOBOSI 200W Slow Juicer is designed to extract maximum juice yield from fruits and vegetables while preserving nutrients through its cold press technology. It features a powerful 200W motor, a wide feed chute, and an intelligent chip for safe operation.

Key Features

• Precision Filtration: Equipped with two microporous filter sizes (0.3mm and 0.7mm) for cleaner juice and efficient pulp separation.
• Enhanced Safety: Features a reversible lid for safe feeding, preventing accidental injury.
• Wide Feed Chute: An 80mm diameter feeding tube allows for processing larger fruits and vegetables, saving preparation time.
• Powerful 200W Motor: Utilizes cold press technology and a high-quality 200W DC copper motor for maximum juice extraction and nutrient retention.
• Smart Chip Technology: Automatically checks motor status every 20 minutes and shuts down in case of overheating to prolong lifespan.
• Easy Cleaning: One-touch disassembly and innovative design make cleaning simple and quick, with a reverse function to prevent clogging.
• Quiet Operation: Operates at less than 60 decibels, ensuring a peaceful juicing experience.
• BPA-Free Materials: All removable parts are made from high-quality, food-grade, BPA-free materials.

Components

The AOBOSI Slow Juicer comes with several key components for its operation and maintenance:

• Juicer Extractor (Main Body): Contains the motor and control panel.
• Pusher: Used to gently guide fruits and vegetables into the feed chute.
• Juice Cup: Collects the extracted juice.
• Slag Collector (Pulp Container): Collects the separated pulp.
• Cleaning Brush: Aids in cleaning the filter and other parts.
• Auger/Masticating Screw: Presses and grinds ingredients.
• Filter Basket: Separates juice from pulp.
• Feeding Chute Assembly: Top part where ingredients are inserted.

2. Important Safety Instructions

To ensure safe operation and prevent injury or damage, please read and follow all instructions carefully before using the appliance.

• Always unplug the juicer from the power outlet before assembling, disassembling, or cleaning.
• Do not immerse the motor base in water or any other liquid. Clean with a damp cloth only.
• Keep hands and utensils out of the feed chute during operation to prevent injury. Always use the provided food pusher.
• Ensure all parts are correctly assembled and locked into place before turning on the juicer. The juicer will not start if the locking plate is not in the correct position.
• Do not operate the appliance if the power cord or plug is damaged, or if the appliance malfunctions or has been dropped or damaged in any manner.
• This appliance is not intended for use by persons (including children) with reduced physical, sensory or mental capabilities, or lack of experience and knowledge, unless they have been given supervision or instruction concerning use of the appliance by a person responsible for their safety.
• The smart chip will automatically shut down the motor if it overheats after approximately 20 minutes of continuous operation. Allow the unit to cool down before resuming use.
• Do not process frozen fruits or vegetables, as this can damage the auger and filter.
• Avoid juicing ingredients with hard pits or large seeds (e.g., peaches, cherries, avocados) without removing them first.

3. Setup Guide

Follow these steps to assemble your AOBOSI Slow Juicer before first use.

1. Install the Juice Cup: Place the juice cup assembly onto the motor base. Ensure the protruding locking plate on the juice cup aligns with the corresponding slot on the motor base.
2. Insert the Auger: Gently press the masticating auger into the center of the filter basket.
3. Attach the Feeding Chute Assembly: Place the feeding chute assembly onto the juice cup. Rotate it clockwise until you hear a click, indicating it is securely locked into place. The juicer will not operate if this part is not correctly locked.

Before first use, wash all removable parts (juice cup, auger, filter basket, feeding chute assembly, pulp container, juice cup, and cleaning brush) with warm, soapy water. Rinse thoroughly and dry completely.

4. Operating Instructions

Preparation of Ingredients

• Wash all fruits and vegetables thoroughly.
• For fibrous ingredients like celery or leafy greens, cut them into smaller pieces (approximately 1-2 inches) to prevent clogging and ensure smooth operation.
• Remove all hard pits, large seeds, and tough skins from fruits and vegetables (e.g., apple cores, cherry pits, orange peels) before juicing.
• The 80mm wide feed chute can accommodate whole fruits and vegetables smaller than 80mm in diameter, such as small apples or carrots.

Juicing Process

1. Place the juice cup and pulp container under their respective spouts.
2. Plug the power cord into a suitable electrical outlet.
3. Turn on the juicer using the power switch.
4. Slowly feed the prepared ingredients into the feed chute. Use the food pusher to gently guide them down. Do not force ingredients into the chute.
5. The juicer will automatically separate the juice into the juice cup and the pulp into the pulp container.
6. If the juicer becomes clogged, press the "REV" (Reverse) button for a few seconds to clear the blockage, then release.
7. Once juicing is complete, turn off the juicer and unplug it from the power outlet.

Quiet Operation

The AOBOSI Slow Juicer is designed for quiet operation, producing less than 60 decibels of noise. This allows for a more pleasant juicing experience, especially in the morning or in quiet environments.

Juice Yield and Quality

The juicer's cold press technology and 8-stage spiral mastication process ensure maximum juice yield and preservation of essential vitamins and enzymes. This method minimizes oxidation, resulting in a richer, more nutritious juice with less foam and pulp.

The dual-layer filter system, with 0.7mm and 0.3mm precision meshes, ensures that the juice is smooth and free from excessive pulp, providing a purer drinking experience.

5. Care and Maintenance

Regular cleaning and proper maintenance will ensure the longevity and optimal performance of your AOBOSI Slow Juicer.

Disassembly for Cleaning

The juicer is designed for one-touch disassembly. Simply press the release button and twist the top assembly to remove it from the motor base. Then, separate the auger, filter basket, and feeding chute assembly.

Cleaning Instructions

• Immediately after each use, rinse all removable parts under running water to remove any remaining pulp or juice residue.
• Use the provided cleaning brush to thoroughly clean the filter basket, as small fibers can get stuck in the mesh.
• Wash all removable parts with warm, soapy water. All removable parts are made from BPA-free, food-grade materials and are safe for hand washing.
• Do not use abrasive cleaners or scouring pads, as they may scratch the surfaces.
• Wipe the motor base with a damp cloth. Never immerse the motor base in water.
• Ensure all parts are completely dry before reassembling or storing the juicer.

Storage

Store the assembled juicer in a clean, dry place, away from direct sunlight and extreme temperatures. Ensure the power cord is neatly coiled and not tangled.

6. Troubleshooting

If you encounter any issues with your AOBOSI Slow Juicer, please refer to the following common problems and their solutions.

If the problem persists after trying these solutions, please contact customer support.

7. Product Specifications

8. Warranty and Support

AAOBOSI is committed to providing high-quality products and excellent customer service.

• Warranty: Our products come with a 2-year warranty.
• Support: Additionally, our products benefit from lifetime support and excellent technical service.
• For any questions, concerns, or technical assistance, please contact AAOBOSI customer support through the retailer's platform or the official brand website.