Zero9 Holsters Model 2007 Body Cam Case Instruction Manual

1. Product Overview

The Zero9 Holsters Model 2007 Body Cam Case is a ruggedized, minimalist design specifically engineered for the Axon Body 3 camera. It features a Molle Lok attachment system, making it ideal for secure mounting on Molle vests and other compatible gear. This product is proudly Made in the USA and designed by law enforcement professionals for law enforcement use.

Image 1.1: The Zero9 Holsters Model 2007 Body Cam Case, designed for secure retention of the Axon Body 3.

2. Setup and Installation

This case utilizes the Molle Lok system for attachment. Molle Loks are specifically designed to mount gear securely to Molle webbing found on tactical vests and other equipment.

2.1 Attaching the Molle Lok

1. Identify the Molle webbing on your vest or gear where you intend to mount the case.
2. Align the Molle Lok attachments on the back of the case with the desired Molle loops.
3. Thread the Molle Lok straps through the webbing, ensuring a tight and secure fit.
4. Close the Molle Lok levers until they snap into place, indicating a locked position.

Image 2.1: Example of Molle Lok attachments, which provide a robust connection to Molle webbing.

2.2 Securing Hardware

It is highly recommended to use a thread-locker on any adjustable hardware to prevent loosening during active use. While some products may include treated screws, regular checks are essential.

• Once the case is adjusted to your preference, apply a small amount of thread-locker to the screw threads before tightening.
• Ensure all screws are firmly tightened, but do not overtighten.

3. Operating Instructions

3.1 Inserting the Axon Body 3 Camera

1. Hold the Model 2007 case firmly with one hand.
2. With your other hand, gently slide the Axon Body 3 camera into the case, ensuring it aligns with the internal contours.
3. Push the camera down until it seats fully and snugly within the case. The design ensures a precise fit with zero wiggle.

3.2 Removing the Axon Body 3 Camera

1. Grasp the Axon Body 3 camera firmly.
2. Pull the camera directly upwards and out of the case. Avoid twisting or forcing the camera.

4. Maintenance

Proper maintenance ensures the longevity and reliable performance of your Zero9 Holsters Body Cam Case.

4.1 Cleaning

• Wipe the case periodically with a damp cloth to remove dirt and debris.
• For stubborn grime, a mild soap solution can be used, followed by rinsing with clean water and air drying.
• Avoid using harsh chemicals or abrasive cleaners, as these can damage the material.

4.2 Hardware Inspection

Regularly inspect all hardware (screws, Molle Loks) for wear, damage, or loosening. This is crucial for maintaining a secure attachment.

• Check screws for tightness at least once a month, or more frequently with heavy use.
• If any hardware appears worn or damaged, contact Zero9 Holsters for replacement parts.

5. Troubleshooting

5.1 Camera Does Not Fit Snugly

• Issue: The Axon Body 3 camera feels loose or wiggles inside the case.
• Solution: Ensure you are using the correct model of the Axon Body camera (Axon Body 3). This case is specifically designed for the Axon Body 3. Verify there is no debris inside the case preventing a full seat.

5.2 Case Feels Loose on Vest

• Issue: The case moves excessively on the Molle webbing.
• Solution: Re-check the Molle Lok attachment. Ensure the straps are threaded tightly through the webbing and the levers are fully closed and locked. If the Molle Loks are damaged, they may need replacement.

5.3 Screws Loosening Over Time

• Issue: The screws holding the case components together become loose.
• Solution: Tighten the screws. For a more permanent solution, apply a small amount of removable thread-locker (e.g., blue Loctite) to the screw threads before re-tightening. Regularly inspect hardware as part of routine maintenance.

6. Specifications

7. Warranty and Support

For specific warranty information or to inquire about product support, replacement parts, or any other questions not covered in this manual, please contact Zero9 Holsters directly.

You can visit the official Zero9 Holsters store for more information and contact details:

Visit the Zero9 Holsters Store on Amazon