VOLTRX Merger USB C Rechargeable Electric Protein Shaker Bottle Instruction Manual

Product Overview

The VOLTRX Merger Electric Protein Shaker Bottle is designed for efficient and lump-free mixing of protein shakes and other powdered beverages. Featuring a powerful blending motor and a leak-proof design, this 24oz bottle is made from BPA-free materials for safe and convenient use.

Setup

1. Initial Charge: Before first use, fully charge the shaker bottle. The battery provides up to 120 uses on a single charge.
2. Charging: Locate the USB-C charging port on the base of the bottle. Open the protective flap and connect the provided USB-C cable to a power source. The indicator light will show charging status.
3. Assembly: Ensure all detachable parts (bottle, lid, and motor base) are clean and dry before assembly. Securely twist the motor base onto the bottom of the bottle, ensuring a tight seal. Then, screw the lid onto the top of the bottle.

Operating Instructions

1. Add Liquid First: Always add your desired liquid (water, milk, etc.) to the bottle before adding any powdered supplements. This helps prevent powder from sticking to the bottom and ensures optimal mixing.
2. Add Powder: Add your protein powder or other supplements to the liquid in the bottle. The bottle has measurement markings up to 24oz (450ml liquid capacity for mixing).
3. Secure Lid: Ensure the lid is securely twisted onto the bottle and the drinking spout is closed to prevent leaks during mixing.
4. Activate Mixing: Press the power button on the motor base once to start the mixing process. The powerful motor and innovative mixing blade will blend ingredients into a smooth, lump-free consistency in approximately 15 seconds.
5. Stop Mixing: The mixer will automatically stop after a short cycle. You can also press the power button again to stop it manually at any time.

Maintenance

1. Cleaning the Bottle and Lid: The bottle and lid are dishwasher safe (top rack recommended). For manual cleaning, rinse thoroughly with warm water and a mild detergent.
2. Cleaning the Motor Base: The motor base contains electronic components and is not dishwasher safe. Detach the motor base from the bottle. Rinse the agitator and the top surface of the motor base with warm water and mild soap. Ensure no water enters the charging port or the main body of the motor base. Wipe dry immediately.
3. Self-Cleaning Function: For quick cleaning, add a few drops of dish soap and warm water to the bottle (with the motor base attached). Activate the mixing function for a few seconds, then rinse thoroughly.
4. Storage: Store the bottle and motor base separately when not in use to allow for complete drying and prevent odors.

Troubleshooting

• Mixer Not Turning On: Ensure the motor base is fully charged. Check that the motor base is securely attached to the bottle.
• Poor Mixing Results: Make sure liquid is added before powder. Do not overfill the bottle beyond the recommended liquid capacity (450ml).
• Leaking: Verify that the motor base is tightly screwed onto the bottle and the lid is securely closed, including the drinking spout. Check the silicone seals for any damage or misalignment.

Specifications

Warranty & Support

Your VOLTRX Merger Electric Protein Shaker Bottle comes with a 1-Year No-Risk Trial. If you are not satisfied, you may return it. We also offer 365 Days, 24/7 Professional Customer Support to assist you with any questions or issues.