VASAGLE EKHO Collection 30-Inch Bar Stools (ULBC090K01) User Manual

1. Introduction

Thank you for choosing the VASAGLE EKHO Collection 30-Inch Bar Stools. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before assembly and retain them for future reference.

2. Safety Instructions

• Ensure all parts are present and undamaged before assembly. Do not use if any parts are missing or defective.
• Assemble the product on a soft, clean surface to prevent scratches.
• Do not fully tighten screws until all components are correctly aligned and in place.
• Regularly check all screws and connections to ensure they remain tight.
• Do not exceed the maximum weight capacity of 265 lbs (120 kg).
• Keep children and pets away from the assembly area.
• Use the product only on a level surface. Adjust leveling feet as needed to prevent wobbling.

3. Package Contents

Before beginning assembly, verify that all components listed below are included in your package. If any parts are missing or damaged, please contact customer support.

• Seat Cushions (2)
• Leg Frames (4)
• Short Crossbars (4)
• Long Crossbars (4)
• Assembly Hardware (Screws, Allen Key, Leveling Feet)

4. Assembly Instructions

Follow these steps to assemble your VASAGLE EKHO Collection Bar Stools. For a visual guide, please refer to the official installation video below.

1. Step 1: Assemble the Leg Frames. Attach the two leg frames (A and B) together using the provided screws and Allen key. Ensure the notches align correctly. Do not fully tighten the screws at this stage.
2. Step 2: Install Crossbars. Insert the short crossbars into the designated holes on the leg frames first, followed by the long crossbars. Align the crossbar notches tightly against the legs to reduce gaps. Secure them with screws, but do not fully tighten yet.
3. Step 3: Final Tightening. Once all crossbars are in place and the frame is stable, gradually tighten all screws in order until secure.
4. Step 4: Attach Seat Cushion. Place the seat cushion onto the assembled metal frame. Secure it from underneath using the remaining screws.
5. Step 5: Adjust Leveling Feet. Turn the stool upright. Adjust the swivel leveling feet at the bottom of each leg to ensure the stool is stable and does not wobble on uneven surfaces.

5. Operating Instructions

Your VASAGLE bar stools are designed for comfort and stability. The 3.1-inch thick, 58D molded foam seat provides supportive cushioning for extended periods. The unique staggered footrests accommodate users of various heights, offering comfortable foot placement.

6. Maintenance and Care

To maintain the appearance and longevity of your bar stools, follow these care guidelines:

• Cleaning: The synthetic leather cover is water-resistant. For spills or dirt, wipe clean with a damp cloth. Avoid harsh chemicals or abrasive cleaners.
• Frame Care: The matte steel legs are designed to resist scratches. Wipe with a soft, dry cloth to remove dust.
• Regular Checks: Periodically inspect all screws and connections to ensure they are tight. Retighten if necessary.

7. Troubleshooting

• Wobbling Stool: If the stool wobbles, adjust the swivel leveling feet at the bottom of each leg until stability is achieved. Ensure all assembly screws are fully tightened.
• Loose Connections: If any part feels loose, re-tighten the corresponding screws using the provided Allen key.

8. Specifications

9. Warranty and Support

For warranty information or customer support, please refer to the documentation included with your purchase or contact VASAGLE directly through their official website or customer service channels. Keep your proof of purchase for any warranty claims.