Maliton Baby Potty Training Seat with Step Stool Instruction Manual

Introduction

Welcome to the Maliton Baby Potty Training Seat with Step Stool. This manual provides essential information for the safe and effective use of your new product. Designed for toddlers, this set aims to support independent potty training and assist with reaching elevated surfaces.

Safety Information

• Always use this product under adult supervision.
• Ensure the potty training seat is securely attached to the toilet before use.
• Verify the step stool is placed on a flat, stable, and non-slip surface.
• Regularly inspect all components for wear or damage. Discontinue use if any damage is found.
• Keep small parts away from children to prevent choking hazards.
• This product is not a toy.

Product Components

The Maliton Potty Training Set includes:

• Potty Training Seat with Handles
• Removable PU Soft Cushion
• Adjustable Snaps for Toilet Attachment
• Two-Tier Step Stool (can be separated into two individual stools)

Image Description: An overhead view of the potty training seat, showing the adjustable snaps on the underside for secure toilet attachment and an anti-slip baffle. Inset images highlight the adjustable mechanism and the secure fit on a toilet bowl.

Setup and Assembly

Potty Training Seat Assembly

1. Attach Handles: Put the two fixed handle structures (L and R) on the bolts (L first, then R), and fix them with nuts.
2. Adjust for Toilet: Adjust the handle according to the size of your toilet and tighten the nut to ensure a snug fit.
3. Place on Toilet: Position the assembled potty training seat securely on your standard toilet. The non-slip border and silicone strips on the bottom will help fix the seat.
4. Insert Cushion: Place the removable PU soft cushion onto the seat for comfort.

Image Description: A four-step visual guide demonstrating the assembly of the potty training seat and the two-tier step stool. Step 1 shows attaching handles to the potty seat. Step 2 illustrates adjusting the seat to fit a toilet. Step 3 shows tilting and inserting the small stool into the large stool. Step 4 shows pressing down to secure the two stool parts together.

Step Stool Assembly

1. The step stool consists of two parts: a large stool and a small stool.
2. To assemble as a two-tier stool, tilt the small stool about 45 degrees and insert its two card slots into the corresponding slots on the large stool. Press down firmly until all four card slots are securely stuck.
3. The stools can also be used separately.

Operating Instructions

Using the Potty Training Seat

• Place the potty training seat firmly on your toilet. Ensure it is stable and does not wobble.
• Encourage your child to use the step stool to climb onto the toilet independently.
• The rounded handles provide support and security for your child while sitting.
• The ergonomic backrest supports the child's spine, and the splash guard prevents messes.

Image Description: A young child happily sitting on the Maliton potty training seat, which is placed on a standard toilet. Inset images highlight the removable PU seat cushion, ergonomic backrest for spine protection, and rounded handles for support and security.

Using the Step Stool

• The two-tier step stool can be used to help your child reach the toilet, sink, or other elevated surfaces in the bathroom or kitchen.
• For younger children, use both tiers. As they grow, the small stool can be removed for a single-tier step.
• The non-slip rubber surface and silicone strips on the bottom ensure stability.
• The invisible handles allow your child to easily move the stool as needed.

Image Description: A Maliton potty training seat on a toilet next to the two-tier step stool. Dimensions of the stool tiers (4.0 inches and 6.1 inches) are indicated, illustrating its double-height design for easy access.

Maintenance and Cleaning

• The removable PU soft cushion can be easily detached for cleaning.
• Wipe down all surfaces of the potty training seat and step stool with a mild soap and water solution.
• Rinse thoroughly and air dry or wipe with a clean cloth.
• Avoid using abrasive cleaners or harsh chemicals that may damage the materials.
• For storage, the toilet seat has a hanging design (hook not included) to save space. The small stool can be placed inside the large stool when not in use.

Image Description: A bathroom scene showing the potty training seat hung on a wall hook next to the toilet, and the two-tier step stool placed on the floor. This illustrates the space-saving hanging design for the seat and the compact storage of the stool.

Troubleshooting

• Seat wobbles on toilet: Ensure the adjustable snaps on the underside of the potty seat are tightened to fit your specific toilet size. Check that the non-slip border and silicone strips are clean and making full contact with the toilet rim.
• Stool slides: Confirm the step stool is placed on a dry, flat surface. The non-slip rubber surface and silicone strips on the bottom are designed to prevent sliding. Clean the bottom of the stool if it appears dirty.
• Urine splashing: The potty training seat features a raised splash guard. Ensure your child is positioned correctly on the seat.

Specifications

Warranty and Support

For warranty information or product support, please refer to the contact details provided with your purchase or visit the official Maliton website. Keep your proof of purchase for any warranty claims.

Additional Resources

• Visit the Maliton Store on Amazon