1. Introduction
Thank you for choosing the ZMJH A102DS-W Electronic Bidet Toilet Seat. This manual provides essential information for the safe and efficient installation, operation, and maintenance of your new bidet toilet seat. Please read it thoroughly before use and retain it for future reference.
Key Features:
- Water Heater: Three adjustable temperature settings for unlimited warm water.
- Heated Seat: Three adjustable temperature settings for comfort.
- Water Pressure: Three adjustable pressure settings.
- Warm Air Dryer: Three adjustable levels for efficient drying.
- Personalized Settings: Ability to save preferred settings for convenience.
- Stainless Steel Nozzle: Hygienic, durable, and features a self-cleaning function.
- Illuminating LED Nightlight: Provides soft illumination for nighttime use.
- Easy Installation: Designed for straightforward installation without professional assistance.
Figure 1: ZMJH A102DS-W Electronic Bidet Toilet Seat with included remote control.
2. Safety Information
Always follow basic safety precautions when using electrical products, especially when children are present. Read all instructions before use.
- Ensure the product is connected to a properly grounded outlet.
- Do not immerse the product in water or other liquids.
- Unplug the product from the outlet when not in use for extended periods or before cleaning.
- Do not allow children to operate the bidet without supervision.
- Avoid using abrasive cleaners or solvents that may damage the product's surface.
3. Package Contents
Verify that all components are present and undamaged before proceeding with installation.
- ZMJH A102DS-W Bidet Toilet Seat (Main Unit)
- Wireless Remote Control
- Remote Control Wall Mount Bracket with Adhesive
- T-Valve for Water Connection
- Bidet Water Supply Hose (PE pipe)
- Mounting Plate
- Mounting Bolts, Washers, and Rubber Nuts
- User Manual (this document)
Video 1: Unboxing and overview of the ZMJH A102S-W Smart Bidet components.
4. Specifications
| Attribute | Value |
|---|---|
| Brand | ZMJH |
| Model Number | A102DS-W |
| Color | White |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Shape | Round |
| Product Dimensions | 18.7"L x 15"W |
| Item Weight | 11 Pounds |
| Voltage | 110 Volts |
| UPC | 749684842932 |
5. Installation
Follow these steps for a successful installation. No special tools are typically required beyond a screwdriver.
5.1 Pre-Installation Check
Before beginning, ensure your toilet is compatible with a round bidet seat and that a 110V electrical outlet is within reach.
Figure 2: Verify toilet shape (Round) and electrical outlet availability.
5.2 Step-by-Step Installation
- Turn Off Water Supply: Locate the water shut-off valve behind your toilet and turn it clockwise until the water supply is completely off. Flush the toilet to drain the tank.
- Remove Existing Toilet Seat: Unscrew the bolts holding your current toilet seat in place and remove the seat and lid.
- Install Mounting Plate: Insert the rubber nuts into the toilet bowl holes. Place the mounting plate over the holes, then insert the mounting bolts through the plate and into the rubber nuts. Tighten the screws to secure the plate.
- Attach Bidet Toilet Seat: Slide the ZMJH bidet toilet seat onto the installed mounting plate until it clicks securely into place.
- Connect T-Valve: Disconnect the existing water supply hose from the toilet tank. Install the provided T-valve between the toilet tank and the water supply hose. Ensure all connections are tight to prevent leaks.
- Connect Bidet Water Hose: Connect one end of the bidet water supply hose (PE pipe) to the T-valve and the other end to the water inlet on the side of the bidet toilet seat.
- Plug in Power Cord: Plug the bidet toilet seat's power cord into a grounded 110V electrical outlet.
- Turn On Water Supply: Slowly turn the water shut-off valve counter-clockwise to restore water supply to the toilet and bidet. Check for any leaks.
6. Operating Instructions
Your ZMJH bidet toilet seat can be operated using the wireless remote control or the integrated side control panel.
6.1 Wireless Remote Control
The remote control offers comprehensive control over all bidet functions. It requires two AAA batteries (not included).
Figure 6: Wireless Remote Control Layout and Functions.
- STOP: Stops all active functions.
- CLEANING/SPA: Initiates rear wash with spa function.
- BIDET/SPA: Initiates feminine wash with spa function.
- DRY: Activates the warm air dryer for 3 minutes.
- DEFECATION: Provides a stronger wash mode for enhanced cleaning.
- AUTO: Activates a wider cleansing area.
- CHILDREN: Adjusts settings for child-friendly use.
- POSITION (Up/Down Arrows): Adjusts the nozzle position.
- PRESSURE (Up/Down Arrows): Adjusts water pressure in 3 levels.
- AIR TEMP (Up/Down Arrows): Adjusts warm air temperature in 3 levels.
- WATERTEMP (Up/Down Arrows): Adjusts water temperature in 3 levels.
- SEATTEMP (Up/Down Arrows): Adjusts seat temperature in 3 levels.
- POWER: Turns the unit on/off.
- LIGHT: Toggles the nightlight on/off.
- SAVE ELE: Activates automatic power-saving mode.
6.2 Side Control Panel
Basic functions can also be accessed via the control panel located on the side of the bidet seat.
Figure 7: Side Control Panel.
6.3 Nightlight Feature
The integrated blue LED nightlight provides subtle illumination, making it easier to use the toilet in low-light conditions without turning on bright bathroom lights.
Figure 8: Illuminating LED Nightlight.
7. Maintenance
Regular cleaning and maintenance will ensure the longevity and hygiene of your bidet toilet seat.
7.1 Nozzle Cleaning
The stainless steel nozzle features a self-cleaning function. It will automatically rinse itself before and after each use. For deeper cleaning, you can manually extend the nozzle (refer to remote control functions) and gently clean it with a soft brush and mild soap.
Figure 9: Stainless Steel Nozzle and Cleaning Functions.
7.2 General Cleaning
- Unplug the bidet toilet seat before cleaning.
- Wipe the exterior surfaces with a soft, damp cloth and a mild, non-abrasive cleaner.
- Do not use harsh chemicals, bleach, or abrasive pads, as these can damage the finish.
- Ensure no water enters the electrical components.
8. Troubleshooting
If you encounter any issues, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| No power/Unit not turning on | Power cord unplugged, circuit breaker tripped, or sensor not activated. | Check power connection, reset breaker, ensure user is seated properly to activate sensor. |
| Water not spraying | Water supply valve closed, nozzle blocked, or sensor not activated. | Open water supply valve, clean nozzle, ensure user is seated properly. |
| Water temperature is inconsistent | Temperature setting too low or water heater issue. | Adjust water temperature setting on remote. If problem persists, contact support. |
| Dryer not working or insufficient heat | Air temperature setting too low or air vent blocked. | Adjust air temperature setting on remote. Ensure air vents are clear. |
Video 2: Instructions on how to eliminate beeping sounds from the bidet seat.
9. Warranty and Support
ZMJH products are designed for quality and reliability. For specific warranty details, please refer to the warranty card included in your product packaging or visit the official ZMJH website. For technical support or service inquiries, please contact ZMJH customer service.
