Alpine S2-S65C Next-Generation S-Series 6.5" Component Speaker Set User Manual

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your Alpine S2-S65C Next-Generation S-Series 6.5" Component Speaker Set. Please read this manual thoroughly before attempting installation or operation to ensure proper use and optimal performance. Keep this manual for future reference.

Image: The Alpine S2-S65C component speaker set, featuring two 6.5-inch woofers and two tweeters.

Safety Information

Always observe the following safety precautions to prevent injury or damage to the product and vehicle:

Professional Installation Recommended: For optimal performance and safety, professional installation by a qualified technician is highly recommended.
Disconnect Battery: Before starting any electrical work, disconnect the vehicle's negative battery terminal to prevent electrical shorts and damage.
Proper Wiring: Ensure all wiring connections are secure and correctly insulated to prevent short circuits. Use appropriate gauge wiring for power and speaker connections.
Mounting Security: Securely mount all components to prevent them from becoming loose during vehicle operation, which could cause injury or damage.
Avoid Obstruction: Do not install speakers in locations that obstruct airbags, driver visibility, or vehicle controls.
Volume Control: Prolonged exposure to high volume levels can cause hearing damage. Adjust volume to a safe and comfortable level.

Package Contents

Verify that all items are present in the package:

Two (2) 6.5" Woofers (S2-S65C)
Two (2) 1" Tweeters with threaded removable housing
Two (2) In-line Crossovers
Mounting Hardware for Tweeters
Wiring for Tweeters
Instruction Manual (this document)

Product Features

Hi-Res Audio Certified: The S2-S65C speakers are Hi-Res Audio Certified, capable of reproducing frequencies up to 40kHz for accurate and natural sound reproduction.
Reliable Performance: Constructed with a blend of Poly Propylene, Glass Fiber, and Mica Cone materials, these speakers offer lightweight design, high output, and low distortion for clear audio.
Image: Close-up view of the S2-S65C woofer cone, highlighting its textured surface and durable construction.
HAMR Surround Technology: Alpine's High Amplitude Multi-Roll (HAMR) surround technology allows for maximum cone movement, delivering powerful and accurate bass.
Image: Detailed view of the HAMR surround on the S2-S65C woofer, designed for extended cone excursion.
Enhanced Component Design: Features 6.5" woofers and 1" tweeters with a peak power of 240W and RMS power of 80W. OEM fitment design and in-line crossovers facilitate seamless integration.
Image: Rear view of the S2-S65C woofer, showing the speaker terminals and magnet structure.

Image: Close-up of an S2-S65C tweeter, showing its protective grille and compact design.
Speaker Grille Compatibility: Compatible with the KTE-S65G Speaker Grille (sold separately) for protection and enhanced visual appeal.
Image: An S2-S65C woofer shown with the optional KTE-S65G speaker grille installed, providing protection.

Setup and Installation

This section provides general guidelines for installing your Alpine S2-S65C component speakers. Specific vehicle requirements may vary. Consult your vehicle's service manual or a professional installer for detailed instructions.

Planning: Determine the optimal mounting locations for the woofers and tweeters in your vehicle. Consider factory speaker locations or custom mounting options.
Preparation: Gather all necessary tools, wiring, and mounting hardware. Disconnect the vehicle's negative battery terminal.
Woofer Installation:
- Remove existing speakers from the desired location.
- Mount the S2-S65C woofers securely using appropriate screws and adapters if needed. Ensure a tight seal to maximize bass response.
- Connect the woofer wires to the vehicle's speaker wiring, observing correct polarity (+ to + and - to -).
Tweeter Installation:
- Choose a mounting method for the tweeters (flush mount, surface mount, or factory location). The threaded removable housing allows for flexible installation.
- Install the tweeters in the chosen location, ensuring they are aimed towards the listening area for optimal sound imaging.
- Connect the tweeter wires to the in-line crossovers, then connect the crossovers to the amplifier or head unit's tweeter output.
Crossover Connection: The in-line crossovers are designed to separate audio frequencies, sending low frequencies to the woofers and high frequencies to the tweeters. Connect them according to the provided wiring diagram (if applicable, typically printed on packaging or a separate sheet).
Testing: Reconnect the vehicle's battery. Test the speakers at a low volume to ensure all connections are correct and sound is clear. Gradually increase volume and check for any distortion or issues.

Operating Instructions

Once installed, your Alpine S2-S65C speakers are ready for use. Follow these general guidelines for optimal listening experience:

Break-in Period: Allow a break-in period of approximately 20-30 hours of normal listening. During this time, the speaker components will loosen up, leading to improved sound quality.
Volume Adjustment: Adjust the volume on your head unit or amplifier to a comfortable listening level. Avoid prolonged listening at excessively high volumes to prevent hearing damage and speaker distortion.
Audio Settings: Utilize your head unit's or amplifier's equalizer and sound processing features to fine-tune the audio to your preference. These speakers are designed to reproduce a wide frequency range, so experiment with settings to achieve your desired sound.
Amplification: While these speakers can be driven by a stock head unit, an external amplifier (80W RMS per channel recommended) will unlock their full potential, providing greater clarity, dynamics, and bass response.

Maintenance

Proper care will ensure the longevity and performance of your Alpine S2-S65C speakers:

Cleaning: Gently wipe the speaker cones and surrounds with a soft, dry cloth to remove dust. Avoid using harsh chemicals or abrasive cleaners.
Protection: If exposed to potential physical damage (e.g., in a trunk or cargo area), consider installing the optional KTE-S65G speaker grilles.
Environmental Factors: Protect speakers from extreme temperatures, direct sunlight, and excessive moisture.
Regular Inspection: Periodically check mounting screws and wiring connections to ensure they remain secure.

Troubleshooting

If you encounter issues with your Alpine S2-S65C speakers, refer to the following common problems and solutions:

Problem	Possible Cause	Solution
No Sound from Speakers	Loose or incorrect wiring connections. Blown fuse in amplifier or head unit. Speaker damaged.	Check all speaker and power connections for security and correct polarity. Inspect and replace any blown fuses. Test with another known-good speaker or consult a professional.
Distorted Sound	Volume too high, causing clipping. Incorrect amplifier gain settings. Loose speaker mounting. Damaged speaker cone or surround.	Reduce volume. Adjust amplifier gain settings according to manufacturer recommendations. Ensure speakers are securely mounted. Inspect speakers for physical damage.
Weak Bass Response	Incorrect woofer polarity. Poor speaker seal in mounting location. Insufficient power from head unit/amplifier.	Verify woofer wiring polarity. Ensure woofers are tightly sealed in their mounting locations. Consider adding an external amplifier for more power.
No Sound from Tweeters	Incorrect crossover connection. Damaged tweeter.	Check crossover wiring and connections. Test with another known-good tweeter or consult a professional.

If the problem persists after attempting these solutions, contact Alpine customer support or a qualified service center.

Specifications

Feature	Detail
Model Number	S2-S65C
Speaker Type	6.5" Component Speaker Set
Woofer Size	6.5 inches (16.5 cm)
Tweeter Size	1 inch
Peak Power Handling	240W
RMS Power Handling	80W
Frequency Response	Up to 40kHz (Hi-Res Audio Certified)
Woofer Cone Material	Poly Propylene, Glass Fiber, and Mica Cone
Surround Technology	HAMR (High Amplitude Multi-Roll)
Item Weight	7 pounds (approx. 3.17 kg)
Product Dimensions	18 x 9 x 6 inches (approx. 45.7 x 22.9 x 15.2 cm)
Date First Available	June 5, 2023
Manufacturer	Alpine

Warranty and Support

Your Alpine S2-S65C speaker set is covered by a manufacturer's warranty. Please retain your proof of purchase for warranty claims.

Manufacturer Warranty: 1-Year Manufacturer Warranty.
Extended Protection Plans: Additional protection plans may be available for purchase separately. Refer to your retailer for details on 2-Year or 3-Year protection plans.
Customer Support: For technical assistance, warranty service, or further inquiries, please visit the official Alpine website or contact their customer service department.

For more information, visit the Alpine Store on Amazon.

	Alpine S2-S69 Coaxial 2-Way Speaker System - Installation, Specifications, and Warranty Detailed information for the Alpine S2-S69 Coaxial 2-Way Speaker System, including installation guidelines, technical specifications, and limited warranty details. Learn about product features, power handling, and compliance.
	Alpine S2-S65C Speaker System: Installation, Specifications, and Warranty This document provides installation instructions, technical specifications, and warranty information for the Alpine S2-S65C 2-way component speaker system. It includes important pre-installation notices and compliance declarations.
	Alpine S-S65C Component Speaker System Installation Guide Comprehensive installation guide for the Alpine S-S65C S-Series 2-way component speaker system, detailing woofer, tweeter, and network components, wiring connections, and external dimensions for vehicle audio integration.
	Alpine S2-Series Subwoofer Application Guide and Specifications Comprehensive application guide, technical specifications, enclosure recommendations, and installation notes for Alpine S2-Series subwoofers, including models S2-W8D2, S2-W8D4, S2-W10D2, S2-W10D4, S2-W12D2, and S2-W12D4. Features detailed component descriptions, wiring diagrams, and warranty information.
	Alpine S2-S10TW Component Tweeter: Specifications, Installation, and Warranty Information Comprehensive guide to the Alpine S2-S10TW component tweeter, detailing technical specifications, installation instructions, important usage notices, warranty terms, and product registration methods.
	Alpine BRV Series Speaker Installation and Warranty Information This document provides important installation notices, technical specifications, and limited warranty details for Alpine BRV-S65C, BRV-S65, BRV-S40C, BRV-S40, and BRV-S80C coaxial 2-way car speaker systems.

Alpine S2-S65C