Introduction
This manual provides essential instructions for the safe and effective use of your VOJSALDR D4.5V-1 charger. This charger is designed as a replacement power adapter for specific Andis 4.5V cordless clippers and trimmers. Please read this manual thoroughly before use and retain it for future reference.
Setup
Package Contents
Upon opening the package, you should find the following item:
- 1 x VOJSALDR DC4.5V Replacement Charger
Compatibility
This charger is specifically designed for Andis 4.5V cordless clippers and trimmers. It is compatible with the following models:
- Andis 73000 Envy Li Cordless Clipper
- Andis 73102 Cordless Envy Li
- Andis 73105
- Andis 73106
- Andis 73005
- Andis 73010
- Andis 73045
- Andis 73050
- Andis 73060
- Andis 73095
- Andis 77511 Supra Li 5
- Andis 73500 SupraLi LCL-2
- Andis 73035
- Andis 73505 Pulse Li 5
- Andis 73515 PulseLi Cordless Clipper Trimmer
Important: This charger is ONLY for the models listed above. It is NOT compatible with any other models.
Image: The VOJSALDR D4.5V-1 charger shown alongside a list of compatible Andis cordless clipper and trimmer models, including 73000, 73060, 73095, 73130, 73500, and 73515.
Connecting the Charger
- Ensure your Andis cordless clipper/trimmer is turned off.
- Insert the barrel connector end of the charger cable into the charging port of your Andis device.
- Plug the AC adapter into a standard wall outlet (AC 100V-240V).
Operating Instructions
Charging Your Device
Once connected, your Andis cordless clipper/trimmer will begin charging. Refer to your device's specific instruction manual for indicators of charging status (e.g., LED lights).
Image: The VOJSALDR D4.5V-1 charger with text overlays indicating its input (AC 100V-240Volt) and output (DC 4.5V class 2 power supply).
Safety Features
The VOJSALDR D4.5V-1 charger incorporates multiple protection mechanisms to ensure safe charging:
- Over Current Protection: Prevents damage from excessive current flow.
- Over Charge Protection: Safeguards against overcharging the device's battery.
- Short Circuit Protection: Protects against damage from short circuits.
- Temperature Protection: Monitors and regulates operating temperature.
- Over Load Protection: Prevents damage from excessive power draw.
- Over Voltage Protection: Shields against damage from voltage spikes.
Image: The VOJSALDR D4.5V-1 charger displayed with six icons and text labels illustrating its multi-protection features: Over Current, Over Charge, Short Circuit, Temperature, Over Load, and Over Voltage Protection.
Maintenance
Care and Storage
- Keep the charger clean and dry. Avoid exposure to moisture or extreme temperatures.
- Do not attempt to disassemble or modify the charger.
- Store the charger in a cool, dry place when not in use.
- Avoid bending or kinking the power cord excessively to prevent internal damage. The cord length is approximately 6.0 feet (1.8 meters).
Image: The VOJSALDR D4.5V-1 charger with its cable extended, showing a measurement of 5.9 feet (1.8 meters) for the cord length.
Troubleshooting
Common Issues and Solutions
- Device not charging:
- Ensure the charger is securely plugged into both the wall outlet and the device.
- Verify that the wall outlet is functional by testing it with another appliance.
- Confirm that your Andis device model is listed as compatible with this charger.
- Charger feels warm:
- It is normal for the charger to become slightly warm during operation. If it becomes excessively hot or emits smoke/odor, unplug it immediately and discontinue use.
Specifications
| Feature | Specification |
|---|---|
| Model Number | D4.5V-1 |
| Input Voltage | AC 100V-240V |
| Output Voltage | DC 4.5V |
| Wattage | 5.4 watts |
| Cord Length | 6.0 ft (1.8 m) |
| Connector Type | Barrel Connector |
| Item Weight | 3.52 ounces |
| Package Dimensions | 3.94 x 2.76 x 1.85 inches |
Image: The VOJSALDR D4.5V-1 charger with its physical dimensions indicated: 2.4 inches in length, 1.57 inches in width, and 1.41 inches in height.
Warranty and Support
Warranty Information
This product comes with a 30-day refund policy and a 12-month exchange warranty from the date of purchase. This warranty covers manufacturing defects under normal use.
Customer Support
For any questions, concerns, or warranty claims, please contact the seller directly through your purchase platform. Provide your order number and a detailed description of the issue for prompt assistance.