Aulin 4FT Marquee Light Up Number 1 Assembly and User Manual

Introduction

This manual provides detailed instructions for the assembly, installation, operation, and maintenance of your Aulin 4FT Marquee Light Up Number 1. Please read these instructions carefully before beginning assembly to ensure correct setup and safe use of the product. Keep this manual for future reference.

Package Contents

Before starting, verify that all components listed below are present in your package:

• 1x 4FT Marquee Light Up Number (Number 1 foam board pieces)
• 1x String Light Bulb set (12 bulbs)
• 1x Instruction Manual (this document)
• 1x White Adhesive Sticker sheet
• Backstand pieces

Detailed Package Contents

Required Tools (Not Included)

• Hot glue gun
• Hot glue sticks
• 3x AA batteries (for string lights)

Assembly Instructions

Follow these steps carefully to assemble your 4FT Marquee Light Up Number 1. It is recommended to watch the provided installation video for visual guidance, noting that the video demonstrates the general assembly process which is similar for all numbers.

Step 1: Prepare Components

Unpack all foam board pieces and identify the holder, base, and side walls. Ensure you have your hot glue gun ready.

Assembly Steps Overview

Step 2: Assemble the Base

1. Unfold the base pieces of the number.
2. Apply hot glue along the edges where the base pieces connect.
3. Press the pieces together firmly for 20-30 seconds to allow the glue to solidify.
4. Repeat this process for all connecting base sections.

Product Components and Features

Step 3: Attach the Side Walls

1. Carefully align the side wall pieces with the assembled base.
2. Match the numbered slots on the side walls with the corresponding numbers on the base.
3. Insert the tabs of the side walls into the slots on the base.
4. Apply hot glue along the inner seams where the side walls meet the base to reinforce the structure. Hold for 20-30 seconds until secure.
5. Repeat this for all side wall sections, ensuring a complete and stable perimeter.

Step 4: Install the Light Bulbs

Note: The light bulbs must be installed before the internal holder pieces are fully secured.

1. Screw each light bulb into its designated socket on the string light set.
2. Carefully place the string light set into the assembled number frame, ensuring the bulbs are positioned in the pre-cut holes.
3. Follow the recommended order (as shown in the video/diagram) to screw in the bulbs for optimal placement.
4. Insert the AA batteries into the battery pack of the string lights.

Step 5: Install the Internal Holder

1. Identify the internal holder pieces. These pieces provide structural support and help secure the lights.
2. Insert the slots of the holder pieces into the corresponding slots on the base and side walls.
3. Apply hot glue along the edges where the holder pieces connect to the base and side walls.
4. Caution: The two boards on the left and right sides of the holder may be different. Ensure they are installed in the correct orientation to avoid issues.

Step 6: Final Touches

1. Use the provided white adhesive stickers to cover any exposed slots or seams for a cleaner finish.
2. Attach the backstand pieces to the rear of the number using hot glue to provide stability. You may add a sandbag or rocks to the base for extra stability if needed.

Assembled Aulin 4FT Marquee Light Up Number 1

Operating Instructions

Once assembled, your Aulin Marquee Light Up Number 1 is ready for use.

• Power On/Off: Use the button control on the battery pack to turn the string lights on or off.
• Placement: Place the assembled number on a flat, stable surface. Utilize the backstand for support.

Maintenance and Care

• Cleaning: Gently wipe the foam board with a dry or slightly damp cloth. Avoid harsh chemicals.
• Storage: Store the marquee number in a dry place away from direct sunlight and extreme temperatures to prevent damage to the foam material.
• Light Bulbs: If a bulb stops working, replace it with a compatible bulb from the string light set.
• Batteries: Remove batteries if the product will not be used for an extended period to prevent leakage.

Troubleshooting

• Lights Not Turning On:
  • Check if the batteries are correctly inserted and have sufficient charge.
  • Ensure the battery pack switch is in the "ON" position.
  • Verify that all light bulbs are securely screwed into their sockets.
• Unstable Structure:
  • Re-check all glued seams for proper adhesion. Apply more hot glue if necessary.
  • Ensure the backstand is correctly attached and positioned.
  • Consider adding weight (e.g., sandbags) to the base for increased stability, especially in outdoor or windy conditions.

Specifications

Customer Support

If you have any questions, concerns, or require assistance with your Aulin 4FT Marquee Light Up Number 1, please do not hesitate to contact our customer support team. We are committed to providing prompt and helpful service.

Contact information is typically found on the product packaging or the retailer's website.