VEVOR Swivel Tall TV Stand Mount Instruction Manual

1. Introduction

Thank you for choosing the VEVOR Swivel Tall TV Stand Mount. This manual provides essential information for the safe and correct assembly, operation, and maintenance of your TV stand. Please read these instructions thoroughly before beginning assembly and retain them for future reference.

Important Safety Information

• Ensure all components are present and undamaged before assembly. Do not use if any parts are missing or defective.
• Adhere strictly to the weight capacity and TV size limits specified in this manual. Exceeding these limits can result in instability and potential injury or damage.
• Assemble the stand on a soft, clean surface to prevent scratches.
• For larger or heavier TVs, it is recommended to have two people for assembly and mounting.
• Keep children and pets away during assembly.
• After assembly, ensure all screws are securely tightened. Periodically check for loose connections.

2. Package Contents

Verify that all parts listed below are included in your package. If any parts are missing or damaged, please contact VEVOR customer support.

• Tempered Glass Base
• Main Support Column
• TV Mounting Bracket Assembly
• Media Shelf
• Vertical TV Brackets (2 pcs)
• Hardware Kit (screws, washers, spacers, Allen wrench, etc.)
• Instruction Manual

3. Specifications

Figure 3.1: Product Dimensions and Specifications. The stand measures approximately 26 inches wide, 15 inches deep, and 51 inches tall. It supports TVs up to 90 lbs with VESA patterns from 100x100mm to 400x600mm.

4. Setup and Assembly

Follow these steps carefully to assemble your VEVOR TV Stand Mount. No drilling into walls is required for installation.

Assembly Steps:

1. Unpack and Identify Parts: Carefully remove all components from the packaging. Lay them out on a soft, flat surface to prevent scratches. Refer to the parts list in Section 2 to ensure all items are present.
2. Assemble the Base: Attach the main support column to the tempered glass base using the provided screws and tools. Ensure the column is securely fastened and stable.
3. Install the Media Shelf: Slide the media shelf onto the main support column at your desired height. Secure it in place with the designated fasteners. This shelf is suitable for devices like DVD players or laptops.
4. Attach TV Brackets to TV: Identify the VESA mounting holes on the back of your television. Select the appropriate screws, washers, and spacers from the hardware kit that fit your TV. Attach the two vertical TV brackets to the back of your TV, ensuring they are level and securely tightened.
5. Mount TV to Stand: With assistance, carefully lift your TV and hook the attached vertical TV brackets onto the mounting plate of the stand. Secure the TV in place using the safety screws or locking mechanisms provided.
6. Cable Management: Utilize the integrated wire management design on the back of the stand to route and conceal cables for a tidy appearance.

Figure 4.1: The VEVOR TV Stand Mount offers hassle-free installation without the need for drilling into walls.

Figure 4.2: The stand is compatible with 32-65 inch TVs, supporting VESA hole distances from 4"x4" (100x100mm) to 16"x24" (400x600mm).

5. Operating Instructions

Height Adjustment

The TV stand offers six levels of height adjustment to optimize your viewing experience. To adjust the height, loosen the securing bolts on the main support column, carefully raise or lower the TV mounting bracket assembly to the desired position, and then securely re-tighten the bolts. Ensure the TV is level after adjustment.

Figure 5.1: The stand provides 6 levels of height adjustment, allowing the TV to be positioned between approximately 46 and 51 inches from the floor, accommodating different viewing preferences in various rooms.

Swivel Function

The TV mounting bracket allows for a ±30° swivel rotation. Gently push the sides of your TV to adjust the viewing angle left or right. This feature is useful for optimizing viewing from different positions within a room.

Figure 5.2: The TV stand offers a ±30° swivel capability for flexible viewing angles and includes a removable tray for media devices.

Media Shelf Usage

The integrated media shelf can hold various devices such as laptops, DVD players, or gaming consoles. Ensure the weight placed on the shelf does not exceed its capacity and is evenly distributed.

6. Maintenance

• Cleaning: Use a soft, damp cloth to clean the tempered glass base and metal components. Avoid abrasive cleaners or harsh chemicals that could damage the finish.
• Regular Checks: Periodically inspect all screws and connections to ensure they remain tight and secure. Re-tighten any loose fasteners to maintain stability.
• Stability: Ensure the stand is always placed on a flat, stable surface to prevent wobbling or tipping.

7. Troubleshooting

Figure 7.1: The VEVOR TV stand features a 0.4" thick tempered glass base for enhanced stability compared to traditional thinner bases.

8. Warranty and Support

For warranty information, technical support, or assistance with missing/damaged parts, please contact VEVOR customer service through the retailer's platform or visit the official VEVOR website. Please have your product model number and purchase details available when contacting support.