NEXHC B0C6JLTWCF

NEXHC USB-Powered Mini Ultrasonic Mist Humidifier Oil Diffuser Instruction Manual

Model: B0C6JLTWCF

1. Product Overview

This device is a USB-powered mini ultrasonic mist humidifier and oil diffuser designed for use in vehicles and other small spaces. It utilizes ultrasonic technology to produce a fine mist, which can disperse fragrance from essential oils and add humidity to the air. The compact design allows it to fit conveniently in a car cup holder.

NEXHC USB-Powered Mini Ultrasonic Mist Humidifier Oil Diffuser in a car cup holder, emitting mist.
Image 1.1: The NEXHC USB-Powered Mini Ultrasonic Mist Humidifier Oil Diffuser in operation within a vehicle's cup holder.

The diffuser is suitable for various environments, including cars, bedrooms, offices, and homes, providing a versatile solution for air humidification and aroma diffusion.

Four images showing the diffuser in different settings: car, bedroom, office, and home.
Image 1.2: Examples of the diffuser's application in various settings, including a car, bedroom, office, and home.

2. Safety Information

  • Avoid direct skin contact with undiluted essential oils.
  • Keep the device out of reach of children and pets.
  • Ensure proper ventilation in the area where the diffuser is used.

3. Setup Instructions

3.1 Unpacking

Carefully remove all components from the packaging. Ensure the USB cable is present, as it is typically located inside the device.

3.2 Power Requirements

The diffuser requires a power adapter or USB charger that provides at least 5V 1A. Using a power source with less than 1A may result in the device lighting up but not producing mist.

Diagram showing USB interface design with various compatible power sources like adapter, notebook, car charger, and power bank.
Image 3.1: The USB interface design, illustrating compatible power sources such as a wall adapter, laptop, car charger, or power bank.

3.3 Filling the Water Tank

  1. Open the upper cover of the diffuser.
  2. Fill the tank with water. If desired, add a few drops of essential oil.
  3. Important: Do not exceed the maximum water line indicated inside the tank. Overfilling can prevent mist production.
  4. Close the upper cover securely.
Four-panel image demonstrating how to use the diffuser: 1. Open the upper cover, 2. Add water and essential oil (not over Max Line), 3. Connect the power, 4. Click the button to start.
Image 3.2: Step-by-step guide on how to prepare the diffuser for use, including opening, filling, connecting power, and starting the device.

3.4 Connecting Power

Connect the provided USB cable to the diffuser and then to a compatible USB power source (e.g., car USB port, USB adapter, power bank).

4. Operating Instructions

4.1 Power On/Off and Mist Modes

The diffuser features a single button for controlling power and mist modes:

  • First press: Activates continuous mist mode.
  • Second press: Switches to intermittent mist mode.
  • Third press: Turns the device off.
Image showing a hand pressing the button on the diffuser, with text indicating '1st press: continuous mist mode', '2nd press: intermittent mist mode', '3rd press: Power off'.
Image 4.1: Instructions for operating the diffuser's mist modes and power using the single control button.

4.2 Mist Duration

  • Intermittent Mist Mode: Provides approximately 3-4 hours of operation.
  • Continuous Mist Mode: Provides approximately 6-8 hours of operation.
Graphic illustrating mist duration: 3-4 hours for intermittent mist and 6-8 hours for continuous mist.
Image 4.2: Overview of the mist duration for both intermittent and continuous operating modes.

5. Maintenance

5.1 Regular Cleaning

To ensure optimal performance and longevity, clean the diffuser every 2-3 days, especially if used for extended periods. Follow these steps:

  1. Unplug the device and empty any remaining water.
  2. Add a small amount of warm water and diluted vinegar to the water tank.
  3. Let the mixture sit for 10-15 minutes.
  4. Use a cotton swab to gently clean the white circular area in the middle of the water tank.
  5. Wipe the entire tank with a soft, dry cloth.
Close-up image showing a cotton swab being used to clean the inside of the diffuser's water tank.
Image 5.1: Demonstrates the use of a cotton swab for cleaning the interior of the water tank.

6. Troubleshooting

6.1 No Mist or Low Mist Production

  • Check Power Adapter: Ensure your USB power adapter provides at least 5V 1A. A lower amperage may cause the device to light up but not produce mist.
  • Water Level: Verify that the water level is below the maximum fill line. Exceeding the maximum line can impede mist production.
  • Cleaning: If the product has been used for a few days and stops misting, it likely requires cleaning. Follow the regular cleaning instructions in Section 5.1.
  • Button Press: Ensure you have pressed the button once for continuous mist or twice for intermittent mist. A long press may only control the light.
Two sections of notes. Left section: 'The product not mist after delivery' with icons for no built-in battery, power adapter >1A, and not exceeding max water line. Right section: 'The product not mist after use for a few days' with an icon for cleaning every 2-3 days.
Image 6.1: Important notes regarding common issues such as no mist after delivery or after extended use, emphasizing power requirements and cleaning.
Diagram showing two water level scenarios: one where water exceeds the MAX line resulting in no/low mist, and another where water is below the MAX line resulting in larger mist.
Image 6.2: Visual guide illustrating the impact of water level on mist production: exceeding the MAX line can lead to no or low mist.

7. Specifications

FeatureSpecification
BrandNEXHC
ModelB0C6JLTWCF
ColorBlack
Recommended UseVehicle
MaterialPlastic (BPA Free)
Special FeatureSilent Operation
Capacity80 Milliliters
Product Dimensions2.8"L x 2.8"W x 6"H
Wattage3 watts
Item Weight8.4 ounces (0.24 Kilograms)
Auto ShutoffNo (Waterless Auto-Off is a common feature for diffusers, but not explicitly stated as 'Auto Shutoff' in specs, so I'll omit to avoid contradiction with 'No' in specs)

8. Warranty and Support

Information regarding product warranty and customer support is not available in the provided data. Please refer to the product packaging or contact the retailer for details.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.