RS Gaming Mergence 60-Inch RGB Gaming Computer Desk

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your RS Gaming Mergence 60-Inch RGB Gaming Computer Desk. Please read this manual thoroughly before beginning assembly or operation to ensure proper use and longevity of your product.

The RS Gaming Mergence desk is designed to enhance your gaming or work setup with its spacious carbon-fiber desktop, integrated RGB lighting, and comprehensive cable management solutions. It also includes a 3-port USB 2.0 hub, a headphone hook, and 10 hexagon acoustic panels to optimize your environment.

Setup and Assembly

Important Note: This product is heavy and oversized. It is strongly recommended that two or more people handle the package and assembly to prevent injury and damage to the product. Assemble the desk in its intended final location to avoid moving it after completion.

Included Components:

• Desk components (desktop, legs, support beams)
• RGB lighting strips and control unit
• Wireless remote control for RGB lighting
• 3-port USB 2.0 hub
• Headphone hook
• Cable straps
• 4 leveling glides
• Removable 38" x 13-1/2" (80 x 30 cm) mouse pad
• 10-piece hexagon acoustic panels (self-adhesive)
• Assembly hardware and tools (if included)

Assembly Steps:

1. Unpack and Organize: Carefully unpack all components and verify against the parts list (not provided in this manual, refer to your product packaging). Lay out all parts on a clean, soft surface to prevent scratches.
2. Assemble Frame: Follow the manufacturer's instructions to assemble the desk frame, including the legs and support beams. Ensure all screws are tightened securely but do not overtighten until the entire frame is assembled.
3. Attach Desktop: Carefully place the carbon-fiber desktop onto the assembled frame and secure it using the provided hardware.
4. Install RGB Lighting: The desk features remote-controlled RGB lighting on the desktop and legs. Connect the RGB lighting strips to the control unit. Caution: The pin connectors for the RGB lighting are delicate. Handle them with extreme care during installation to avoid damage.
5. Cable Management: Utilize the concealed, under-desk cable trays and the full-length, rear-hinged compartment for organizing and routing cables. The 3-port USB 2.0 hub can be integrated into your setup for convenient connectivity.
6. Attach Accessories: Install the headphone hook to your preferred location on the desk.
7. Apply Leveling Glides: Attach the 4 leveling glides to the bottom of the desk legs. Adjust them as needed to ensure the desk is stable and level on uneven surfaces.
8. Acoustic Panels: The 10-piece hexagon acoustic panels are self-adhesive and wall-mountable. Plan your desired arrangement on a clean, dry wall surface before removing the adhesive backing.
9. Mouse Pad: Place the removable mouse pad on the desktop for smooth, wide coverage.

Figure 1: Desk dimensions and acoustic panel layout. The desk measures approximately 60 inches wide, 25.7 inches deep, and 29.5 inches high. Acoustic panels are hexagonal, measuring 13.8 inches across and 11.9 inches high.

Operating Instructions

RGB Lighting Control:

The integrated RGB lighting is controlled via the included wireless remote. Point the remote towards the desk to operate. The remote allows you to:

• Turn the lights on/off.
• Adjust dynamic modes and speeds.
• Switch between various colors.
• Adjust brightness levels.

USB Hub:

The desk includes a 3-port USB 2.0 hub for convenient connection of peripherals such as keyboards, mice, or charging small devices. Connect the hub's main cable to your computer's USB port.

Headphone Hook:

Use the integrated headphone hook to keep your headphones within reach and off the desktop, contributing to a tidy workspace.

Leveling Glides:

Adjust the leveling glides at the base of each leg by twisting them to compensate for uneven flooring, ensuring the desk remains stable and wobble-free.

Figure 2: The RS Gaming Mergence desk in a typical setup, highlighting the RGB lighting and acoustic panels.

Figure 3: Detail of the carbon-fiber desktop and the included mouse pad, providing a smooth surface for peripherals.

Maintenance

Cleaning the Desk:

The carbon-fiber surface is designed for durability. To clean, wipe with a soft, damp cloth. Avoid abrasive cleaners or harsh chemicals that could damage the finish. Ensure the surface is dry after cleaning.

RGB Lighting Care:

Periodically check the RGB lighting connections to ensure they are secure. Due to the delicate nature of the pin connectors, avoid excessive pulling or bending of the wires. If cleaning is necessary, use a dry, soft cloth.

Acoustic Panels:

The acoustic panels can be gently dusted or vacuumed with a soft brush attachment to maintain their appearance and effectiveness.

Troubleshooting

RGB Lights Not Working:

• Check Connections: Ensure all RGB lighting pin connectors are securely and correctly inserted into the control unit and lighting strips.
• Remote Battery: Verify that the wireless remote control has a working battery. Replace if necessary.
• Power Source: Confirm that the RGB lighting system is properly connected to a power source.

Desk Instability/Wobbling:

• Tighten Fasteners: Recheck all assembly screws and bolts to ensure they are fully tightened.
• Adjust Leveling Glides: Use the adjustable leveling glides on the bottom of the legs to stabilize the desk on uneven floors.
• Component Alignment: During initial assembly, ensure all frame components are correctly aligned before tightening. If the desk was assembled with misaligned parts, partial disassembly and reassembly with careful alignment may be required.

Specifications

Warranty Information

This RS Gaming Mergence 60-Inch RGB Gaming Computer Desk comes with a Limited Warranty. For specific details regarding coverage, duration, and claims procedures, please refer to the warranty documentation included with your product packaging or contact the manufacturer directly.

Support

If you encounter any issues not covered in this manual, require replacement parts, or need further assistance, please contact RS Gaming customer support. Contact information can typically be found on the product packaging, the manufacturer's official website, or through your point of purchase.