Mondeer Modern Dining Table Instruction Manual

1. Introduction and Safety Warnings

Thank you for choosing the Mondeer Modern Dining Table. This manual provides essential information for the safe assembly, use, and maintenance of your new table. Please read all instructions carefully before beginning assembly and retain this manual for future reference.

Safety Warnings:

• Assembly requires two persons. Do not attempt to assemble alone to prevent injury or damage to the product.
• Do not place hot objects directly on the tempered glass surface. Always use coasters or protective mats.
• Follow all assembly and usage instructions carefully to avoid injury.
• Keep small parts and packaging materials away from children.
• Ensure all screws and fasteners are tightened securely before use. Periodically check and re-tighten as needed.
• The table has a maximum recommended weight capacity of 150 kg (330 lbs). Do not exceed this limit.

Package Contents:

Before assembly, verify that all components are present and undamaged. The package should include:

• 1 x Dining Tabletop
• 4 x Table Legs
• 1 x Hardware Kit (screws, washers, adjustable feet)
• 1 x Instruction Manual

2. Setup and Assembly

Assembly is straightforward and can be completed in a few simple steps. A screwdriver is recommended for assembly (not included). Two people are required for safe assembly.

Assembly Steps:

1. Unpack Components: Carefully remove all parts from the packaging. Place them on a soft, clean surface to prevent scratches.
2. Attach Legs to Tabletop: Align each table leg with the pre-drilled holes on the underside of the tabletop. Secure each leg using the provided screws and washers from the hardware kit. Ensure all connections are firm but do not overtighten initially.
3. Install Adjustable Feet: Screw the adjustable feet into the bottom of each table leg. These feet help stabilize the table on uneven surfaces and protect your floor from scratches.
4. Final Tightening: Once all legs and feet are in place, carefully turn the table upright with the help of another person. Ensure the table is stable, then fully tighten all screws.

Figure 2.1: Table Dimensions (150cm L x 85cm W x 76.5cm H)

Figure 2.2: Adjustable Foot Detail

3. Operating and Usage

The Mondeer Dining Table is designed for use in dining rooms, kitchens, or living areas, comfortably seating 4 to 6 people. Its modern design with a black tabletop and metal frame complements various interior styles.

Key Features:

• Adjustable Feet: The metal legs are equipped with anti-slip pads that allow for minor height adjustments to ensure stability on uneven floors. These pads also protect your flooring from scratches and reduce noise when moving the table.
• Durable Construction: Made from E1 quality particle board and a metal frame, the table offers a stable and robust structure. The black tempered glass insert can withstand temperatures up to 200°C.
• Safety Design: The table features rounded edges and corners to minimize impact from accidental bumps, enhancing safety for you and your family.

Figure 3.1: Mondeer Dining Table in a Dining Room

Figure 3.2: Mondeer Dining Table in a Kitchen

4. Maintenance and Care

Proper care and maintenance will ensure the longevity and appearance of your Mondeer Dining Table.

Cleaning Instructions:

• Tabletop (Tempered Glass & Particle Board): Wipe the surface with a soft, damp cloth. For stubborn stains, use a mild, non-abrasive cleaner specifically designed for glass or furniture. Dry immediately with a clean, dry cloth to prevent water spots.
• Metal Frame/Legs: Clean with a soft, dry cloth. If necessary, use a slightly damp cloth with a mild detergent, then dry thoroughly.
• Avoid using harsh chemicals, abrasive cleaners, or scouring pads, as these can damage the finish.

General Care Tips:

• Always use placemats or coasters to protect the tabletop from spills, heat, and scratches.
• Do not drag the table when moving it; always lift it with the help of another person to prevent damage to the legs and floor.
• Periodically check all screws and fasteners to ensure they remain tight. Re-tighten if necessary.
• Avoid prolonged exposure to direct sunlight or extreme temperature changes, which can affect the material.

Figure 4.1: Tempered Glass Surface and Rounded Edges

5. Troubleshooting

If you encounter any issues with your Mondeer Dining Table, refer to the following common problems and solutions:

Common Issues:

• Table is wobbly:
  Solution: Check if all screws connecting the legs to the tabletop are securely tightened. Adjust the leveling feet at the bottom of each leg to compensate for uneven flooring.
• Scratches on the tabletop:
  Solution: Minor scratches on the particle board surface may be minimized with furniture polish. Deep scratches on tempered glass are difficult to repair and may require professional attention or replacement of the tabletop. Always use protective mats to prevent scratches.
• Difficulty assembling:
  Solution: Re-read the assembly instructions carefully, paying close attention to diagrams. Ensure you have all necessary tools (screwdriver) and that two people are assisting with the assembly. If parts are missing or damaged, contact customer support.

6. Specifications

Detailed specifications for the Mondeer Modern Dining Table N-FDDT08BW-G1L:

7. Warranty and Support

Mondeer is committed to providing high-quality products. While specific warranty details are not provided in this manual, most products come with a manufacturer's warranty against defects in materials and workmanship.

For Warranty Claims and Customer Support:

• Please retain your proof of purchase (receipt or order confirmation).
• Contact the retailer or Mondeer customer service directly for assistance with warranty claims, missing parts, or any product-related inquiries. Refer to the contact information provided at the point of purchase or on the official Mondeer website.