WINFLIKE LP21138-001 Infrared Remote Control User Manual

1. Introduction

The WINFLIKE LP21138-001 is a replacement infrared remote control designed to operate various JVC Video Recorder models. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your remote control.

Compatible JVC Video Recorder Models:

• HR-J4020UA
• HR-J4020UB
• HR-S2902U
• HR-J692UC
• HR-J692US
• HR-J7020UM
• HR-S2902US
• HR-S1902U
• HR-J692U
• HR-J7020UA
• HR-J7010UM
• HR-S1902US

2. Package Contents

Upon opening the package, you should find the following item:

• 1X WINFLIKE LP21138-001 Infrared Remote Control

3. Setup

This remote control requires no programming. Simply install batteries to begin operation.

1. Locate the battery compartment on the back of the remote control.
2. Open the battery compartment cover.
3. Insert two new AAA alkaline batteries (not included), ensuring correct polarity (+ and -) as indicated inside the compartment.
4. Close the battery compartment cover securely.

Figure 1: Front view of the WINFLIKE LP21138-001 Remote Control, illustrating the button layout.

4. Operating the Remote Control

The remote control provides intuitive access to all functions of your compatible JVC video recorder. Point the remote directly at the infrared sensor on your video recorder for optimal performance.

Figure 2: Angled view of the WINFLIKE LP21138-001 Remote Control.

Key Functions:

• POWER: Turns the video recorder on or off.
• TV/VCR: Switches between TV and VCR modes.
• INPUT: Selects input sources.
• VOL +/-: Adjusts volume.
• CH +/-: Changes channels.
• Number Pad (0-9): Direct channel selection and data entry.
• PLAY, STOP, PAUSE, REW, FF, REC: Standard video playback and recording controls.
• MENU: Accesses the video recorder's on-screen menu.
• OK/ENTER/OSD: Confirms selections or displays On-Screen Display.
• Arrow Buttons (Up, Down, Left, Right): Navigates through menus.
• DISPLAY: Shows current status or information.
• TIMER: Sets recording timers.
• CANCEL: Exits menus or cancels operations.

5. Maintenance

Proper care will extend the life of your remote control.

• Cleaning: Use a soft, dry cloth to clean the remote control. Do not use liquid cleaners or abrasive materials.
• Battery Replacement: Replace batteries promptly when the remote's response becomes sluggish or it stops functioning. Always use new alkaline batteries of the specified type (AAA).
• Storage: Store the remote in a cool, dry place away from direct sunlight and extreme temperatures.
• Handling: Avoid dropping the remote control or subjecting it to strong impacts.

6. Troubleshooting

If you experience issues with your remote control, refer to the following common solutions:

• Remote not responding:
  • Ensure batteries are inserted correctly with the correct polarity.
  • Replace old batteries with fresh alkaline batteries.
  • Check for any obstructions between the remote control and the video recorder's infrared sensor.
  • Point the remote directly at the video recorder's sensor.
  • Confirm that your JVC video recorder model is listed as compatible in the "Introduction" section.
• Limited operating range:
  • Replace batteries with new ones.
  • Ensure a clear line of sight between the remote and the video recorder.
  • Avoid strong light sources (e.g., direct sunlight) that might interfere with the infrared signal.
• Specific buttons not working:
  • This remote is designed for specific JVC video recorder models. Some buttons may not be functional if your video recorder does not support that feature.
  • Ensure the remote is clean and there is no debris under the buttons.

7. Specifications

8. Warranty and Support

For warranty information and customer support, please refer to the documentation provided with your purchase or contact the seller directly. WINFLIKE INC is the manufacturer of this product.