1. Introduction
Thank you for choosing the LUE BONA 24-inch Counter Height Saddle Bar Stools. This manual provides essential information for the safe assembly, operation, and maintenance of your new bar stools. Please read these instructions carefully before assembly and retain them for future reference.
2. Safety Information
- Maximum Weight Capacity: Do not exceed the maximum weight limit of 300 lbs (136 kg) per stool. Exceeding this limit may result in damage to the stool or personal injury.
- Stability: Ensure all foot pads are properly adjusted and the stool is stable on a level surface before use to prevent tipping or wobbling.
- Assembly: Assemble the stools strictly according to the instructions provided. Ensure all screws and fasteners are securely tightened before use. Periodically check and re-tighten fasteners as needed.
- Children: Keep children away from the assembly area. Do not allow children to climb or play on the stools unsupervised.
- Placement: Avoid placing stools near heat sources, open flames, or in direct sunlight for prolonged periods to prevent material degradation.
3. Package Contents
Your LUE BONA Counter Height Saddle Bar Stools package includes the following components for a set of three stools:
- 3 x Saddle Seat Cushions (Faux Leather, White)
- 3 x Metal Leg Frames (Black)
- Hardware Pack (Screws, Washers, Allen Wrench)
- Adjustable Foot Pads (pre-installed or included separately)
- Assembly Instructions
Please verify all parts are present and undamaged before proceeding with assembly. If any parts are missing or damaged, contact customer support.
4. Assembly Instructions
Assembly of the LUE BONA Counter Height Saddle Bar Stools is straightforward. Please follow these steps:
- Unpack Components: Carefully remove all components from the packaging. Lay them out on a clean, soft surface to prevent scratches.
- Attach Seat to Frame: Align the saddle seat cushion with the top of the metal leg frame. Ensure the pre-drilled holes on the underside of the seat align with the holes on the frame.
- Secure with Screws: Insert the provided screws through the frame and into the seat. Hand-tighten all screws initially. Do not fully tighten until all screws are in place.
- Final Tightening: Once all screws are in place, use the Allen wrench to fully tighten all fasteners. Ensure the seat is firmly attached to the frame and there is no wobbling.
- Adjust Foot Pads: If your stools come with adjustable foot pads, ensure they are securely attached and adjust them as needed to level the stool on uneven surfaces.
Image: Key components of the LUE BONA saddle bar stool, highlighting the ergonomic seat, high-density foam, stable footrest, and sturdy metal frame.
Images: Details of the sturdy metal frame and adjustable foot pads, crucial for stability and floor protection.
Assembly Video
Video: Official LUE BONA video demonstrating the features and assembly of the saddle leather bar stools.
5. Operation
The LUE BONA Counter Height Saddle Bar Stools are designed for comfortable seating at kitchen islands, home bars, or bistro tables. To use your stools:
- Ensure the stool is placed on a flat, stable surface.
- Sit centrally on the saddle-shaped cushion for optimal comfort and stability.
- Utilize the built-in footrest for added comfort and support.
- Avoid standing on the stool or using it as a step ladder.
Image: The compact design of the bar stools allows them to be easily stored under counters, ideal for small spaces.
6. Maintenance
Proper care will extend the life and appearance of your LUE BONA bar stools:
- Cleaning: Wipe the faux leather seat and metal frame with a damp cloth. For stubborn stains on the faux leather, use a mild soap solution and wipe dry immediately. Avoid harsh chemicals or abrasive cleaners.
- Inspection: Periodically check all screws and connections to ensure they remain tight. Re-tighten if necessary to maintain stability.
- Protection: Avoid prolonged exposure to direct sunlight or extreme temperatures, which can cause the faux leather to fade or crack.
- Floor Protection: Ensure the adjustable foot pads are intact and functioning to protect your floors from scratches. Replace worn pads if needed.
Image: The high-quality faux leather is wear-resistant, waterproof, and easy to clean.
7. Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| Stool is wobbly | Uneven floor; Loose fasteners; Unevenly adjusted foot pads. | Ensure the stool is on a level surface. Tighten all assembly screws. Adjust the foot pads until the stool is stable. |
| Screws loosen over time | Normal wear and tear. | Periodically check and re-tighten all assembly screws to maintain stability. |
| Scratches on floor | Missing or damaged foot pads. | Ensure all foot pads are present and in good condition. Replace if damaged. |
| Faux leather cracking or fading | Exposure to direct sunlight or harsh chemicals. | Avoid prolonged direct sunlight exposure. Use only mild cleaners as recommended. |
8. Specifications
| Feature | Detail |
|---|---|
| Model Number | WHITE3NEW |
| Product Dimensions (D x W x H) | 13.4"D x 16.2"W x 24"H (34cm D x 41.1cm W x 61cm H) |
| Seat Height | 24 Inches (61 cm) |
| Seat Width | 13.4 Inches (34 cm) |
| Item Weight (per stool) | Approx. 11.4 lbs (34.2 lbs / 3 stools) |
| Maximum Weight Recommendation | 300 Pounds (136 kg) |
| Color | White and Black |
| Frame Material | Metal |
| Seat Material | Faux Leather |
| Number of Pieces | 3 |
| Assembly Required | Yes |
Image: Dimensional overview of the LUE BONA 24-inch saddle bar stool, including maximum weight capacity and recommended table height.
9. Warranty & Support
LUE BONA products are manufactured with quality and durability in mind. For specific warranty details or if you encounter any issues not covered in this manual, please contact LUE BONA customer support through your purchase platform or the official LUE BONA website. Please have your model number (WHITE3NEW) and purchase date available when contacting support.
We are committed to providing excellent service and support for your product.