Introduction
This manual provides comprehensive instructions for the installation, operation, and maintenance of your Honeywell HN35040102 35 Series 4K 4-Channel Embedded NVR. Please read this manual thoroughly before using the device to ensure proper functionality and to prevent damage.
Figure 1: Front view of the Honeywell HN35040102 NVR. The front panel features the Honeywell logo on the left, two USB ports, power and alarm indicator lights, and "NVR 35 SERIES" branding on the right.
Key Features
- HTTPS Secure Stream Encryption: Ensures secure data transmission.
- Intuitive Interface with Honeywell Smart Viewer (HSV) Software: For easy management and monitoring.
- Remote Access via P2P: Allows access to your NVR from anywhere.
- Supports uploading still images at the time of the event through email: Event-triggered image capture and notification.
- Supports notifications through email or alarm out including visual and auditory such as a flashing light, bell, or siren: Comprehensive alert system.
- HDMI/VGA simultaneous video output: Flexible display options.
- Supports up to 4 alarm input channels and 1 alarm relay output channel: Enhanced alarm integration.
- End to end HTTPS stream encryption with TLS 1.2 Connection to NVR anytime anywhere (local, remote, global P2P): Robust security for remote connections.
- Multi-NVR management supports up to 2048 video channel connections: Scalable solution for large systems.
- Supports two way audio through 35S NVR with 35S cameras: Interactive audio capabilities.
What's in the Box
Upon unboxing, please verify that all components are present and undamaged.
- Honeywell HN35040102 35 Series 4K 4-Channel Embedded NVR unit
- Power Adapter
- Mouse (typically included for initial setup)
- Quick Start Guide (refer to this manual for detailed instructions)
Setup
1. Physical Installation
- Placement: Choose a cool, dry, and well-ventilated location away from direct sunlight, heat sources, and strong electromagnetic interference. Ensure adequate space around the NVR for proper airflow.
- Connect Cameras: Connect your IP cameras to the NVR's PoE ports (if applicable) or to your network switch if using non-PoE cameras. Ensure cameras are powered on.
- Connect Display: Connect a monitor to the NVR's HDMI or VGA output port.
- Connect Mouse: Plug the USB mouse into one of the USB ports on the NVR.
- Network Connection: Connect an Ethernet cable from the NVR's LAN port to your network router or switch.
- Power On: Connect the power adapter to the NVR and then to a power outlet. The NVR will power on automatically.
2. Initial Configuration
Upon first boot, the NVR will guide you through an initial setup wizard. Follow the on-screen prompts to:
- Set up administrator password.
- Configure date and time settings.
- Set up network parameters (DHCP is recommended for most home networks).
- Search for and add connected IP cameras.
- Initialize the hard disk drive (HDD) for recording.
Operating
1. Live View
After successful setup, the NVR will display the live view of connected cameras. You can switch between single-camera view and multi-camera grid view. Use the mouse to navigate the interface.
2. Recording
- Continuous Recording: Records 24/7.
- Motion Detection Recording: Records only when motion is detected.
- Scheduled Recording: Records during specific time periods.
- Manual Recording: Start/stop recording manually.
Configure recording schedules and settings via the NVR's menu system (typically under "Record" or "Storage" settings).
3. Playback
Access recorded footage through the "Playback" menu. You can search by date, time, and event type. Use the timeline to navigate through recordings.
4. Remote Access (P2P)
The Honeywell HN35040102 supports P2P (Peer-to-Peer) for easy remote access without complex network configurations. Download the Honeywell Smart Viewer (HSV) software or the compatible mobile application on your smartphone or tablet. Scan the QR code displayed on the NVR's network settings or input the device's serial number to add it to your remote viewing application.
Maintenance
- Regular Cleaning: Dust the NVR unit periodically with a soft, dry cloth. Ensure ventilation openings are clear of obstructions.
- Firmware Updates: Check the Honeywell support website regularly for firmware updates. Keeping your NVR's firmware up-to-date ensures optimal performance, security, and access to new features.
- Hard Drive Health: Monitor the health of the internal hard drive through the NVR's system settings. Back up critical footage if the drive shows signs of failure.
- Password Security: Regularly change your NVR's administrator password and use strong, unique passwords.
Troubleshooting
| Problem | Possible Cause | Solution |
|---|---|---|
| No video output on monitor. | Loose cable connection, incorrect input selected on monitor, NVR not powered on. | Check HDMI/VGA cable connections. Ensure monitor is on correct input. Verify NVR power indicator is lit. |
| Cannot access NVR remotely. | Network issue, incorrect P2P settings, firewall blocking. | Ensure NVR is connected to the internet. Verify P2P status in NVR settings. Check router/firewall settings. |
| Cameras not showing up. | Camera not powered, network issue, incorrect IP address, camera not added to NVR. | Check camera power and network connection. Ensure cameras are on the same network segment as NVR. Use NVR's camera search function to add cameras. |
| No recording. | HDD not initialized, recording schedule not set, HDD full, HDD failure. | Initialize HDD in NVR settings. Configure recording schedule. Check HDD status and free space. Replace HDD if faulty. |
Specifications
| Feature | Detail |
|---|---|
| Main Processor | ARM Processor |
| Operating System | Embedded LINUX |
| Video Inputs | 4 channels |
| Audio Input/Output | 3.5 mm Line in x1; 3.5 mm Line out x1 |
| 2-way Communication | Supported |
| Audio Format | G.711 |
| Interface | HDMI x 1 (4K Max), VGA x1 (1080P) |
| Resolution | 3840 x 2160, 1920 x 1080, 1280 x 1024, 1024 x 768 |
| Display Split | 1 x 1, 2 x 2, customs |
| PTZ Operation | Direction control, home, iris, preset, patrol |
| Internal HDD | Internal x1 (3.5 inches), 2TB included |
| Manual Backup | USB Dongle (FAT Format) |
| Ethernet | 10/100Mbps Ethernet (RJ-45) x 1 |
| PoE | 802.3at/af compliant PoE ports x 4 |
| Power Supply | 100-240V AC, 50/60 Hz |
| Dimensions | 10.04 x 9.34 x 1.78 inches |
| Weight | 2.20 lb without HDD |
Warranty and Support
For detailed warranty information, please refer to the warranty card included with your product or visit the official Honeywell website. For technical support, firmware updates, and additional resources, please visit the Honeywell support portal or contact their customer service. Keep your purchase receipt and product serial number handy when seeking support.
Honeywell Official Website: www.honeywell.com