1. Introduction
Thank you for choosing the Eujgoov 800GAL/h Pool Filter Pump. This pump is designed to circulate and filter your pool water, enhancing clarity and overall water quality. It operates efficiently and quietly, ensuring a pleasant environment around your pool. Constructed from durable ABS material, the pump features an internal epoxy seal for reliable waterproofing and long-lasting performance.
2. Important Safety Information
Please read all safety instructions carefully before installation and operation. Failure to follow these instructions may result in electric shock, fire, or serious injury.
- Always disconnect the power supply before performing any maintenance, cleaning, or servicing on the pump.
- Do not operate the pump if the power cord or plug is damaged. Contact qualified personnel for repair or replacement.
- Ensure the pump is properly grounded to prevent electrical hazards.
- Keep children and pets away from the pump during operation.
- Do not immerse the pump in water beyond its intended design. The pump is waterproof, but the power plug is not.
- Install the pump on a stable, level surface away from direct sunlight and excessive moisture.
3. Package Contents
Verify that all components are present in the package:
- 1 x Pool Filter Pump
- 2 x Hoses
- 2 x Filters (Inlet/Outlet Strainers)
- 4 x Buckles
- 4 x Buckle Screws
- 1 x User Manual
Image: Overview of all included accessories and the pump unit.
4. Setup and Installation
Follow these steps to properly set up your pool filter pump:
Image: Labeled components of the pool filter pump for easy identification.
Image: The pump connected to a pool, showing the water inlet and outlet connections.
Installation Steps:
- Prepare the Buckles and Hoses: Insert the screw into each buckle. Place a buckle ring onto each water pipe (hose) before connecting them to the pump. This ensures the buckles are in place for tightening.
- Connect Hoses to Pump: Attach the water pipes (hoses) to the inlet and outlet ports of the filter pump. Ensure a snug fit.
- Secure Connections: After positioning the water pipes, tighten the screws on the buckles to firmly secure the hoses to the filter pump. This prevents leaks and ensures proper water flow.
- Connect to Pool: Connect the other ends of the hoses to the appropriate inlet and outlet valves of your swimming pool.
- Position the Pump: Place the pump on a stable, level surface near the pool. Ensure it is not submerged and has adequate ventilation.
- Power Connection: Once all hoses are securely connected and the pump is positioned, plug the power cable into a suitable electrical outlet.
Image: Step-by-step visual instructions for connecting the pump hoses.
Image: The pool filter pump installed and operating next to a swimming pool.
5. Operating Instructions
After completing the setup and ensuring all connections are secure and leak-free:
- Plug the power cable into a grounded electrical outlet. The pump will begin circulating and filtering the pool water automatically.
- Allow the pump to run for several hours each day to ensure proper filtration and maintain water clarity. The optimal running time depends on pool size and usage.
- To stop the pump, simply unplug the power cable from the electrical outlet.
6. Maintenance
Regular maintenance is crucial for the longevity and efficient operation of your pool filter pump.
Filter Cartridge Cleaning and Replacement:
- Frequency: The filter cartridge should be checked and cleaned regularly, typically every 1-2 weeks, depending on pool usage and debris levels.
- Procedure:
- Disconnect the pump from the power supply.
- Carefully open the filter housing.
- Remove the filter cartridge.
- Rinse the cartridge thoroughly with a garden hose to remove accumulated debris. If the cartridge remains dirty or damaged after cleaning, it should be replaced.
- Reinsert the clean or new filter cartridge into the housing and secure the cover.
- Reconnect the pump to the power supply.
- Reusable Filter Element: The filter element is designed to be reusable after cleaning, providing an excellent filtering experience.
Image: The reusable filter cartridge, emphasizing its design for easy cleaning and replacement.
General Care:
- Periodically inspect hoses and connections for wear, cracks, or leaks. Replace damaged parts immediately.
- Keep the pump exterior clean by wiping it with a damp cloth. Do not use harsh chemicals.
- During winter months or extended periods of non-use, drain the pump and hoses, clean the filter, and store the unit in a dry, protected area.
7. Troubleshooting
If you encounter issues with your Eujgoov Pool Filter Pump, refer to the following common problems and solutions:
| Problem | Possible Cause | Solution |
|---|---|---|
| Pump does not start | No power supply Damaged power cord/plug | Check if the pump is properly plugged into a working outlet. Inspect the power cord for damage. If damaged, do not use and seek professional repair. |
| Low water flow | Clogged filter cartridge Blocked hoses Air in the system | Clean or replace the filter cartridge. Check hoses for kinks or debris and clear any blockages. Ensure all connections are tight to prevent air intake. |
| Water leaks | Loose hose connections Damaged O-rings/seals | Tighten all hose clamps and connections. Inspect O-rings and seals for wear or damage and replace if necessary. |
| Unusual noise | Debris in pump impeller Pump not level | Disconnect power and check for debris in the impeller area. Ensure the pump is placed on a stable, level surface. |
8. Specifications
| Feature | Detail |
|---|---|
| Model | HS 8660 |
| Brand | Eujgoov |
| Power | 30 W |
| Flow Rate | 800 GAL/hour |
| Noise Level | Below 85 dB |
| Material | Acrylonitrile Butadiene Styrene (ABS) |
| Power Source | Corded Electric |
| Waterproofing | Internal epoxy seal |