Phoenix Home PHCD0245

Phoenix Home Power Lift Recliner Chair

Model: PHCD0245

User Instruction Manual

1. Introduction

Thank you for choosing the Phoenix Home Power Lift Recliner Chair. This manual provides essential information for the safe and efficient use of your new recliner. Please read it thoroughly before assembly and operation, and retain it for future reference.

Phoenix Home Power Lift Recliner Chair in brown, showing massage points.

Image 1.1: The Phoenix Home Power Lift Recliner Chair, highlighting its massage zones.

2. Safety Information

CAUTION: This is an electric power lift chair. Always follow assembly instructions carefully to avoid injury. Be aware of the powerful motor when adjusting the chair's position. Keep children and pets away from the chair when in use. Do not exceed the maximum weight capacity of 350 pounds.

  • Ensure all electrical connections are secure and properly grounded.
  • Do not allow children to play on or around the chair unsupervised.
  • Keep hands and feet clear of the chair's moving parts during operation.
  • Unplug the chair from the power outlet before cleaning or maintenance.
  • Do not use the chair if any part is damaged or appears to be malfunctioning. Contact customer support immediately.

3. Package Contents

Your Phoenix Home Power Lift Recliner Chair is shipped in three separate boxes. Please ensure you have received all boxes before beginning assembly.

  • Recliner Base
  • Backrest Section
  • Armrests (Left and Right)
  • Wired Remote Control
  • Power Adapter and Cable
  • Instruction Manual (this document)

4. Setup and Assembly

Assembly of the Phoenix Home Power Lift Recliner Chair is designed to be straightforward and requires no additional tools. Please follow these steps:

  1. Unpack all components from the three boxes.
  2. Place the recliner base in the desired location, ensuring sufficient space for reclining and lifting functions.
  3. Slide the backrest section onto the metal posts located on the recliner base until it clicks securely into place.
  4. Attach the left and right armrests by sliding them onto their respective brackets on the base. Ensure they are fully seated.
  5. Connect the power adapter to the chair's power input and then plug it into a standard wall outlet.
  6. Connect the wired remote control to its designated port on the chair.

Verify all connections are firm before operating the chair.

Icons for easy and fast installation, one-year technical support, and 24-hour after-sales service.

Image 4.1: Visual representation of easy assembly and support services.

5. Operating Instructions

The Phoenix Home Power Lift Recliner Chair features power lift assistance, massage, heating, and USB charging capabilities, all controlled via the wired remote.

5.1 Power Lift and Recline Function

The chair's powerful motor allows for smooth adjustment between 45° (lifted) and 150° (fully reclined) angles. Use the buttons on the wired remote control to operate these functions.

  • Press the "UP" button to gently lift the chair, assisting the user to a standing position.
  • Press the "DOWN" button to recline the chair backward or return it to the upright sitting position.
Diagram showing the Phoenix Home recliner chair's lift and recline angles (45 to 150 degrees) and control buttons for lift, USB, and recline.

Image 5.1: Power Lift and Recline Control with USB Port.

5.2 Massage and Heating Functions

The recliner is equipped with an 8-point massage system and 2 lumbar heating points, controlled by the wired remote.

  • Massage Points: The 8 massage points target the back, lumbar, thighs, and legs.
  • Massage Modes: Choose from 5 adjustment modes (Pulse, Press, Wave, Auto, Normal) to customize your massage experience.
  • Lumbar Heating: Activate the 2 lumbar heat points to promote blood circulation and provide warmth.
  • Timer Function: Set the massage and heating functions to operate for 15, 30, or 60 minutes using the timer button on the remote.
Phoenix Home recliner chair with massage points highlighted and a remote control showing massage and heating options.

Image 5.2: Massage and Heating Remote Control.

5.3 USB Charging Port

A convenient USB charging port is located on the side of the chair, allowing you to charge your electronic devices while relaxing.

  • Locate the USB outlet on the side of the chair.
  • Plug your device's USB charging cable into the port.
  • The port provides power to charge compatible devices.
Close-up of the USB charging port and side pocket on the Phoenix Home recliner chair.

Image 5.3: USB Charge Port and Side Pocket.

5.4 Side Pocket

The chair includes a side pocket for convenient storage of small items such as the remote control, magazines, or your phone.

6. Maintenance

Regular maintenance will help prolong the life and performance of your recliner chair.

  • Cleaning: For fabric surfaces, use a soft, damp cloth with mild soap and water. Test on an inconspicuous area first. Do not use harsh chemicals or abrasive cleaners.
  • Dusting: Regularly dust the chair with a soft, dry cloth.
  • Motor and Mechanism: Periodically check for any loose screws or connections. Do not lubricate the motor or mechanical parts unless specifically instructed by Phoenix Home customer support.
  • Power Cord: Inspect the power cord and adapter for any signs of damage. If damaged, discontinue use and contact customer support.

7. Troubleshooting

If you encounter any issues with your recliner, please refer to the following common troubleshooting steps:

ProblemPossible CauseSolution
Chair does not move/no powerPower cord unplugged; Outlet not working; Remote control not connected.Ensure power cord is securely plugged into chair and wall outlet. Test outlet with another device. Check remote control connection.
Massage/Heating not workingRemote control issue; Function not activated.Ensure remote is properly connected. Press the specific massage/heating buttons on the remote. Check timer settings.
Chair makes unusual noisesLoose components; Obstruction in mechanism.Inspect for any loose screws or foreign objects. Ensure chair is on a level surface. If noise persists, contact customer support.
USB port not chargingDevice cable issue; Device incompatibility.Try a different USB cable or device. Ensure the chair is powered on.

If the problem persists after attempting these solutions, please contact Phoenix Home customer support.

8. Specifications

Detailed specifications for the Phoenix Home Power Lift Recliner Chair:

  • Model Name: Phoenix Home Power Lift Recliner Chair for Elderly Electric Single Massage Sofa for Living Room with USB Ports, Side Pocket
  • Model Number: PHCD0245
  • Brand: Phoenix Home
  • Color: Brown
  • Product Dimensions (D x W x H): 39.7"D x 35.8"W x 42.9"H
  • Seat Height: 19.7 Inches
  • Seat Depth: 21.65 inches
  • Seat Back Interior Height: 28.4 Inches
  • Maximum Weight Recommendation: 350 Pounds
  • Item Weight: 30.6 pounds
  • Fill Material: Sponge
  • Reclining Position Count: 1 (continuous adjustment from 45° to 150°)
  • Special Features: Adjustable Backrest, Arm Rest, 8-Point Massage, Lumbar Heating, USB Charging Port, Side Pocket
  • Room Type: Bedroom, Living Room, Study Room, Entryway, Home Office
Detailed dimensions diagram of the Phoenix Home Power Lift Recliner Chair.

Image 8.1: Product Dimensions.

9. Warranty and Support

Phoenix Home is committed to providing high-quality products and excellent customer service.

  • Technical Support: Your Phoenix Home Power Lift Recliner Chair comes with one-year technical support.
  • After-Sales Service: We offer 24-hour after-sales service to assist with any inquiries or issues you may have.

For assistance, please refer to the contact information provided with your purchase or visit the official Phoenix Home website.

© 2025 Phoenix Home. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.