Avorla Silicone led neck mask

Avorla Beauty LED Light Mask User Manual

Model: Silicone LED Neck Mask

Introduction

The Avorla Beauty LED Light Mask is a flexible silicone device designed for facial and neck skin care. It utilizes various LED light wavelengths, including red, infrared, and blue light, to address different skin concerns such as wrinkles and acne. The mask is lightweight, portable, and features adjustable straps for comfort, allowing for hands-free use.

Safety Information

  • Keep away from direct heat sources.
  • Do not look directly at the LED lights during operation.
  • This device is for external use only.

What's in the Box

The Avorla Beauty LED Light Mask package includes the following components:

  • LED Face Mask
  • LED Neck Mask
  • Controller
  • 3 Velcro Straps
  • Face Mask Adjustable Straps
  • 2 Protective Eye Pads
  • 1 USB Charging Cable
  • User Manual
  • Charger
Contents of the Avorla Beauty LED Light Mask box, showing the face mask, neck mask, controller, straps, eye pads, and charging cable.
Image: All components included in the Avorla Beauty LED Light Mask package.

Setup

  1. Charge the Controller: Before first use, ensure the controller is fully charged using the provided USB charging cable and charger.
  2. Connect the Mask: Connect the LED face mask and/or neck mask to the controller. Ensure connections are secure.
  3. Attach Straps and Eye Pads: Secure the face mask and neck mask using the adjustable straps and Velcro straps for a comfortable fit. Place the protective eye pads over your eyes to shield them from direct light.
Diagram showing how to connect the LED face mask and neck mask to the controller and wear them.
Image: Visual guide for connecting and wearing the LED mask components.

Operating Instructions

Basic Use

  1. Cleanse Skin: Ensure your face and neck are clean and dry before applying the mask.
  2. Wear the Mask: Position the LED face and neck masks comfortably on your skin, securing them with the straps.
  3. Power On: Press the power button on the controller to turn on the device.
  4. Select Mode and Intensity: Use the controller to select your desired light color mode and intensity level.
  5. Treatment Duration: The device has a built-in timer. You can choose a single color for 10 minutes or allow it to run for a 20-minute automatic cycle. The mask will shut off automatically after the set time.
  6. Hydrate: After your session, apply a hydrating serum or moisturizer to your skin.
Step-by-step guide on how to use the Avorla LED mask: cleanse skin, wear mask, power on, hydrate after use.
Image: Visual steps for using the LED mask.

Light Modes and Benefits

The Avorla Beauty LED Light Mask offers 7 different light colors, each targeting specific skin concerns:

  • Red Light (630nm & IR 850nm): Helps reduce wrinkles and promote overall skin rejuvenation.
  • Blue Light (470nm): Effective for combating acne.
  • Green Light (520nm): Aims to even skin tone.
  • Yellow Light (590nm): Supports anti-inflammation.
  • Purple Light (390nm): Aids in skin hydration.
  • Cyan Light (490nm): Assists in blackhead removal.
  • White Light (MIX): Provides a combination of benefits for overall skin beauty.
Diagram illustrating the 7 different LED light colors and their corresponding skin benefits, such as red for wrinkle reduction and blue for acne relief.
Image: Overview of the 7 color light sources and their deep skin care benefits.

Usage Frequency

For optimal results, use the mask for 15-20 minutes per session, 3-4 times per week.

Official Product Videos

Video: An overview of the Avorla Beauty LED Light Mask, demonstrating its features and use.

Video: Demonstration of the LED face mask for face, neck, and back skin care.

Video: Explanation of blue light for acne and red/infrared light for wrinkles.

Video: Highlights of the Avorla 7-color LED Face Mask, emphasizing its lightweight and rechargeable design.

Maintenance

  • Cleaning: Gently wipe the mask surfaces with a soft, damp cloth after each use. Do not use harsh chemicals or abrasive cleaners.
  • Storage: Store the mask and controller in a cool, dry place away from direct sunlight and extreme temperatures.
  • Charging: Recharge the controller as needed. Avoid overcharging or completely draining the battery for extended periods.

Troubleshooting

ProblemPossible CauseSolution
Mask does not turn onController battery is low or depleted.
Mask not properly connected to controller.		Charge the controller fully.
Ensure all cables are securely plugged into the controller and mask.
Lights are dim or inconsistentLow battery.
Faulty connection.		Recharge the controller.
Check all connections. If problem persists, contact customer support.
Mask feels uncomfortableStraps are too tight or improperly adjusted.Adjust the head and Velcro straps to ensure a comfortable, yet secure, fit. Ensure eye pads are correctly positioned.

Specifications

  • Product Dimensions: 11.81 x 8.21 x 0.22 inches
  • Item Weight: 8.64 ounces
  • Batteries: 1 Lithium Ion battery required (included)
  • UPC: 686294359378
  • Manufacturer: Avorla
  • Item Form: Sheet
  • Product Benefits: Anti Acne, Wrinkles Treatment
  • Skin Type: All
  • Target Use Body Part: Face, Neck
  • Included Components: LED mask, Controller, USB, Belts, User Manual, Charger
  • Material Features: Fragrance Free, silicone, LED chips

Warranty and Support

Avorla offers a 90-day free return policy for this product, ensuring customer satisfaction. For any issues, questions, or support needs, please contact Avorla customer service. Timely and helpful support is available to assist with product inquiries or operational concerns.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.