Bruder Scania Super 560R Construction Site Truck with Crane - Instruction Manual

Introduction

This manual provides detailed instructions for the assembly, operation, and maintenance of your Bruder Scania Super 560R Construction Site Truck with Crane. Please read all instructions carefully before use to ensure safe and proper handling of the product.

Image: The Bruder Scania Super 560R Construction Site Truck, featuring a yellow cab and dump bed, with a red and black crane arm extended over the bed, and a grey shovel gripper attached.

Safety Information

WARNING:

• Not suitable for children under 36 months.
• Choking hazard due to small parts.
• Adult supervision is recommended during play.

Components Included

The following items are included with your Bruder Scania Super 560R Construction Site Truck:

• Scania Super 560R Construction Site Truck with integrated crane
• Grab shovel attachment
• Pallet fork attachment
• Two (2) pallets

Setup

Your Bruder Scania Super 560R Construction Site Truck comes largely pre-assembled. Follow these steps for initial setup:

1. Cab Access: The cab features folding wing mirrors and opening doors. Gently open the doors to access the interior. Note that bworld figures are not included.
2. Crane Attachments: The shovel gripper is pre-attached. To replace it with the pallet fork, carefully detach the shovel gripper from the crane arm and secure the pallet fork in its place.
3. Stabilizer Feet: Locate the side extendable and lowerable support feet. Extend these feet outwards and lower them to provide stability when operating the crane or loading/unloading the truck.

Image: The truck with the crane arm, showing the shovel gripper attached and the blue pallet fork accessory detached, along with two wooden pallets.

Operating Instructions

This section details the functions of your construction site truck.

Crane Operation with Shovel Gripper

• The loading crane is located directly behind the driver's cab.
• It can be rotated 360 degrees for versatile positioning.
• The crane arm features fold-out and telescopic functions, allowing for precise movement and extension.
• A locking device is integrated to secure the crane in any desired position during operation.
• Attach the shovel gripper for handling loose materials.

Image: The truck with its crane arm fully extended, demonstrating the reach of the shovel gripper attachment.

Image: The truck's crane arm is shown lifting the shovel gripper, with pallets visible on the truck bed.

Crane Operation with Pallet Fork

• To handle pallets, detach the shovel gripper and attach the pallet fork to the crane arm.
• Use the pallet fork to lift and move the included pallets.
• The crane's 360-degree rotation and telescopic arm allow for precise placement of pallets.

Image: The truck's crane arm is shown lifting two pallets using the pallet fork attachment, with the shovel gripper detached.

Loading Area Functions

• The loading area can be tilted to facilitate unloading.
• The side walls of the loading area can be folded down in three directions for easy access and loading.
• Ensure the support feet are extended and lowered for stability when tilting the loading area or folding down side walls.

Image: The truck with its yellow dump bed tilted upwards, demonstrating its unloading capability, with the crane arm positioned to the side.

Maintenance

To ensure the longevity and proper function of your Bruder Scania Super 560R Construction Site Truck, follow these simple maintenance guidelines:

• Cleaning: Wipe the truck with a damp cloth to remove dust and dirt. Avoid harsh chemicals or abrasive cleaners.
• Storage: Store the toy in a clean, dry place away from direct sunlight and extreme temperatures.
• Inspection: Periodically check for any loose or damaged parts. If any parts are broken, discontinue use and contact customer support.

Troubleshooting

If you encounter any issues with your Bruder Scania Super 560R Construction Site Truck, consider the following:

• Crane not holding position: Ensure the locking device on the crane arm is properly engaged.
• Attachments not securing: Verify that the attachments (shovel gripper, pallet fork) are correctly aligned and firmly clicked into place on the crane arm.
• Truck instability: Always extend and lower the support feet when operating the crane or tilting the loading area to prevent tipping.

Specifications

Warranty and Support

For warranty information or customer support regarding your Bruder Scania Super 560R Construction Site Truck, please refer to the manufacturer's official website or contact their customer service department directly. Keep your purchase receipt as proof of purchase.

Manufacturer: Bruder